Car accessories. Car chemistry. Oils. Others
Hearing protectors SNR 27dB
Protection level 27 dB Type B020 EN 352-1:2002 CE conformity
Heat-shrink tubing set 127pcs
30 pcs. 2.0 x 40 mm 25 pcs. 2.5 x 40 mm 20 pcs. 3.5 x 40 mm 20 pcs. 5.0 x 40 mm 16 pcs. 7.0 x 80 mm 8 pcs. 10.0 x 80 mm 8 pcs. 13.0 x 85 mm Max temperature 125° C Max voltage 600 V
Hitch pin set 150pcs
42 pcs. 2.4 x 31 mm 30 pcs. 2 x 33 mm 25 pcs. 2 x 40 mm 25 pcs. 2.8 x 42 mm 20 pcs. 3.5 x 45 mm 8 pcs. 4 x 75 mm
Hose clamp - 12-22mm
Made of galvanized steel W1 Complies with DIN 3017 A special screw allows tightening with a flat spanner and a flat or Phillips screwdriver It is widely used for fixing rubber hoses and pipes in water, oil, pneumatic, etc. installations
Hose clamps set (175pcs)(5-27mm)
A set of 175 pieces of galvanized steel clamps placed in a convenient sorter Sizes: 5 - 7 mm - 25 pcs 7 - 9 mm - 25 pcs 9 - 11 mm - 25 pcs 11 - 13 mm - 20 pcs 13 - 15 mm - 20 pcs 15 - 18 mm - 20 pcs 17 - 20 mm - 15 pcs 20 - 23 mm - 15 pcs 23 - 27 mm - 10 pcs
Hose clamps set (365pcs) (8-80mm)
Ties are widely used for fixing rubber hoses and pipes in water and pneumatic installations, etc. in gardening and automotive Contents of the set: TORRO-S STRIP 8-16 / 9 - 50 pcs TORRO-S STRIP 10-16 / 9 - 50 pcs TORRO-S STRIP 12-22 / 9 - 40 pcs TORRO-S STRIP 16-27 / 9 - 40 pcs TORRO-S STRIP 20-32 / 9 - 35 pcs TORRO-S STRIP 25-40 / 9 - 35 pcs TORRO-S STRIP 35-50 / 9 - 40 pcs TORRO-S STRIP 40-60 / 9 - 35 pcs TORRO-S STRIP 50-70 / 9 - 25 pcs TORRO-S STRIP 60-80 / 9 - 15 pcs SW 7 flexible screwdriver Exhibition hanger
Insulation tape 19mm x 20m
Working temperature +5° C +50° C Width 19 mm Length 20 m Thickness 0.13 mm
Insulation tape double-sided 19mm (2pcs)
Double-sided insulation tape, 19 mm wide, intended for insulating and sealing work as well as for attaching various parts. Useful both in the garage and around the house. Pack of 2.Type: double-sidedWidth: 19 mmQuantity per pack: 2 pcs
Insulation textile tape - 19mm x 15m
Tape designed to organize and secure electrical cable bundles. Particularly useful for wrapping bundles in places exposed to abrasion and low and high temperatures. The possibility of cutting at any place allows you to adjust the length of the tape to the diameter of the wires. Easy joining due to the applied adhesive coating resistant to moisture. The possibility of repeated use at temperatures from -40 ° C to + 105 ° C Material: durable nonwoven fabric Colour: neutral black Thickness: 0.3 mm
Insulation textile tape 38mm x 50m
Made of cotton-polyester fibers embedded in polyethylene tape with hotmelt adhesive,(synthetic feces) applied on one side. Width: 38 mm Length: 50 m Material: textile Color: gray
Interlocking area floor tiles - Tile 400 x 400 x 18 mm | Grey
Tiles are suitable for a variety of uses and can perfectly finish any garage, detailing studio, or workshop. They come in a selection of colours and come with edge pieces and corner sections to perfectly complete the edge of your work space. The tiles are UV stabilized making them highly UV resistant, resulting in a finish that is extremely durable and not prone to discolouring or fading in direct sunlight. Very sturdy, was designed with industrial standards in mind – Capable of withstanding 20 tonnes of direct loadings per tile & 75 tonnes of rollover weight, it Is perfectly suited for use on almost any floor area, from workshops to dealerships as well as home garages & gyms to name a few. Suitable for jacking vehicles & supporting axle stands. Specifications: Size – 400 mm x 400 mm (0.96 m2 = 6 tiles 400 x 400 mm) Thickness – 18mm Produced From Polypropylene Copolymer Anti-Static Coating Self-Drainage Channelling underside of tile The tiles are 4 x point injection moulded with 24 x connecting points for added strength & durability. Durable - are resistant to oils & acids as well as most other chemicals – contact us for more information if required. Is commercially graded temperature resistant. Suitable for use in temperatures from -40°C to 120°C
Internal circlip set 300pcs
20 pcs. R-01 vidinis Ø 3 mm 10 pcs. R-02 vidinis Ø 4 mm 15 pcs. R-03 vidinis Ø 5 mm 25 pcs. R-04 vidinis Ø 6 mm 15 pcs. R-05 vidinis Ø 8 mm 20 pcs. R-06 vidinis Ø 9 mm 15 pcs. R-07 vidinis Ø 11 mm 15 pcs. R-08 vidinis Ø 12 mm 25 pcs. R-09 vidinis Ø 13 mm 15 pcs. R-11 vidinis Ø 14 mm 20 pcs. R-12 vidinis Ø 15 mm 25 pcs. R-13 vidinis Ø 19 mm 15 pcs. R-14 vidinis Ø 20 mm 20 pcs. R-15 vidinis Ø 22 mm 15 pcs. R-16 vidinis Ø 25 mm 15 pcs. R-17 vidinis Ø 26 mm 10 pcs. R-18 vidinis Ø 28 mm 5 pcs. R-19 vidinis Ø 32 mm
Internal E-type circlip set 300pcs
30 pcs. Ø 1.5 mm 30 pcs. Ø 3 mm 40 pcs. Ø 5 mm 50 pcs. Ø 6 mm 50 pcs. Ø 10 mm 40 pcs. Ø 12 mm 20 pcs. Ø 15 mm 20 pcs. Ø 19 mm 20 pcs. Ø 22 mm
MANNOL Air Filter Oil 200ml
MANNOL 9964 air filter lubricant/impregnator 200ml is intended for zero resistance air filters. The product has water repellency and dust retention properties. When operating a motorcycle in difficult conditions (off-road driving, high revs, dusty conditions), it is advisable to use the product every 5000 km, when operating in normal conditions every 10000 km. Properties: - Provides maximum air supply, increasing engine power; - Reliably holds dust, dirt and sand in the most extreme conditions. Reduces wear and extends the oil change interval. Eliminates engine damage caused by contamination, extends its life and reduces maintenance and repair costs; - Provides excellent adhesive properties of the filter, so that it effectively detains even the smallest dust particles, while it is securely held on the surface of the filter elements; - Recommended for use in Motorsport; - Colors the filter in tints from pale pink to red, and the color may appear immediately or after a while; - Completely eliminates the risk of destruction of HIGH-FLOW filters during operation. Application: Remove the filter. Clean the filter surface from coarse dust and dirt particles by tapping and then using a soft-pile brush. Apply MANNOL Universal Cleaner 9972 on both sides of the filter. Let it soak in. After 10 minutes, rinse the filter in a container of water, then under a low stream of water. Dry the filter well. Shake the container and spray 9964 MANNOL Air Filter Oil on the filter from a distance of 20-30 cm. Mash the filter to achieve the best penetration of the impregnation into the filter. Let it dry for 15 minutes.
MANNOL Air-con fresh 200ml
Air-Con Fresh is a prophylactic agent for deodorisation in vehicle air conditioners, ventilation ducts or vehicle air ducts without removing the cabin filter It effectively and quickly removes unpleasant smells, bacteria, fungi and prevents them from re-forming It leaves a fresh and pleasant aroma This product prevents allergic diseases In order to dry the evaporator surface run the engine and set the following heating and ventilation conditions for 10 minutes: air conditioner OFF, recirculation ON, air distribution set to the footwell, set temperature and fan speed to max. Shake the can well before use. Place the Air-Con Fresh in the intake area of the air circulation system (mostly passanger footwell) and switch air distribution to windshield. Then press the sprayhead until it locks. Keep windows and doors closed for 10 minutes. Dry the evaporator at the same settings as described above. Switch off the engine and ventilate the interior for 10 minutes. Use disinfectants safely. Always read the label and product information before use.
MANNOL body polishig paste set
Schleifpaste Profi Set is a set of professional diatomite abrasive pastes for manual and MECHANICAL polishing of paint coatings. Pastes differ in the grain size of the abrasives. MANNOL Schleifpaste No. 1 removes deep scratches, damaged, oxidized or dull top layers of paint due to the large abrasive grains contained in it. It allows you to easily remove smudges and stains of lacquers and paints during the restoration of the body, as well as adjust the color shades during partial painting. MANNOL Schleifpaste No. 2 removes small scratches, minor defects in paint coatings and solidified residues of petroleum products due to the micro abrasive components contained. It easily removes excess varnish after painting the body, facilitates deep cleaning of the surface, removes rust and aggressive substances from the micro cracks of the paintwork and individual chrome parts. Sizes of abrasive particles: MANNOL Schleif Paste No. 1 – 75 microns, MANNOL Schleif Paste No. 2 – 3 microns. Application: Clean the surfaces to be treated. RUB MANNOL Schleif paste No. 1 on small areas with a cloth or sponge, with the necessary pressure, Until the damaged and oxidized layers of the previous coating, rust, oxides, dirt and scratches are removed. For a mirror-like finish, apply MANNOL Schleif Paste No. 2 liberally to the surface using the supplied wet cloth and Polish it, then rinse it off.
MANNOL Brake Cleaner 20l
Brake cleaner / Metal Parts Cleaner / Degreaser A solvent blend for cleaning and degreasing metal parts. Designed for effective cleaning of brake drums, discs, pads, cylinders and clutch parts. Quickly and effectively removes dirt, dust, grease and brake fluid. Dries quickly and leaves no residue. Features and Benefits: Removes brake fluid, oil, tar, grease and other contaminants Cleans without stripping Eliminates brake squeal and clutch slippage caused by dirt or burn-in Dries quickly and leaves no residue How to use: Spray, brush or dip. Follow safety precautions for flammable liquids. Allow to absorb, then wipe off with a dry cloth. Storage: Store below 50°C. Avoid direct sunlight.
MANNOL Brake Cleaner 450ml
MANNOL Brake Cleaner is a special cleaner for all separate parts in the motor vehicle breaking system. It has excellent cleaning properties and is applicable to brake shoes and discs. It removes soiling, oil, grease, brake fluid, other petrochemicals and burnt technical fluids.
MANNOL Brake Fluid DOT-4 1l
Synthetic brake fluid based on polyglycols and esters, containing corrosion and oxidation inhibitors Designed for hydraulic systems of all traditional brake devices and clutches Product properties: Contains boric acid, which completely neutralizes water condensate Provides reliable operation of the brake system at any ambient temperature due to the increased boiling point (>245 °C) and excellent low-temperature properties (up to -40 °C) Has the highest chemical and thermal stability Offers excellent lubricity and viscosity-temperature properties Neutralizes the formation of vapour bubbles Compatible with elastomers Entirely inactive for the parts of the brake system Aggressive to paintwork Color: colorless / light brown Recommendation: SAE J1703/J1704 ISO 4925 FMVSS 116 DOT 4 JIS JAPAN K2233
MANNOL Carburetor Cleaner 400ml
Carburetor cleaner is an effective cleaning agent for the carburetor without removing it It removes high-temperature deposits from the inner and outer surface of the carburetor It completely optimises the function of the fuel system This product is applicable to two- and four-stroke petrol engines with and without catalyst
MANNOL Carburetor Cleaner 600ml
Carburetor cleaner is an effective cleaning agent for the carburetor without removing it It removes high-temperature deposits from the inner and outer surface of the carburetor It completely optimises the function of the fuel system This product is applicable to two- and four-stroke petrol engines with and without catalyst