For removal and replacement of the retaining screws in brake caliper on Audi A7, Q7, S4 and other models Drive: 1/2" / Size: QKX3 Length: 50 mm

For pipes 1/4" (6.3 mm), 5/16" (8 mm), 3/8" (10 mm) Can be bent up to 180° Suitable for copper and aluminum pipe bending

3/8'' square drive 2 and 3 pin, fits a range of 20 - 35 mm For vehicles with self-adjusting parking brakes Fits most of cars with 2 or 3 slotted wind-back calipers pistons

Circlip pliers with tips bent at 90°, used for fitting and removing retaining rings. The angled tips make work easier in hard-to-reach places, for example when repairing brake systems and other vehicle assemblies.Tip angle: 90°Application: fitting and removing circlipsCategory: brake repair tools

Fast, easy and effective bleeding of brakes and clutch using air from tyre Capacity 500 ml Max air supply 20 psi Suitable for use with ABS systems Adaptors: 1 pcs. 25 mm Cap & Seal for Lockheed Systems 1 pcs. 27 mm Cap & Seal for VAG 1 pcs. 44/45 mm Cap with 2 Seals (1 x Thin for 44 mm, 1 x Thick for 45 mm) for Metal Girling & ATE Systems 1 pcs. 46 mm Cap & Seal for some Girling Systems 2 pcs. Bleed pipes

Capacity 2.5 l + 1l Working pressure 2 bar Max pressure 4.8 bar Fitted with Ø42mm cap with connector which is suitable for most European models

This Master Cylinder Adapter is compatible with Tesla Model 3 & Y.The Adapter should be used with brake fluid bleeder pumps The Brake Bleeder Adapter can easily do the job of filling the brake fluid of Tesla model 3/Y.Special. With a 90 degree swivel joint, easy to work in tight Spaces. The brake bleeder adapters are made of aluminum with an anodized surface, giving these adapters good wear and corrosion resistance along with a clean, rich appearance. The adjustable O-ring has an automatic expansion function to ensure good air tightness. The rubber ring on the inside has good sealing performance.

This Master Cylinder Adapter is compatible with Tesla Model S & X.The Adapter should be used with a brake fluid bleeder pump. The Brake Bleeder Adapter can easily do the job of filling the brake fluid of Tesla model S/X.With a 90 degree swivel joint, easy to work in tight Spaces. The brake bleeder adapters are made of aluminum with an anodized surface, giving these adapters good wear and corrosion resistance along with a clean, rich appearance. The adjustable O-ring has an automatic expansion function to ensure good air tightness. The rubber ring on the inside has good sealing performance.

This 43mm master cylinder adapter is used for Toyota and Lexus cars. In order to improve the consumer experience, please confirm whether it is suitable for your model before purchasing.The inner diameter is 43mm This adapter is designed let you easily remove and refill fluid into brake system. This 43mm aluminum alloy adapter is chrome-plated and blue-oxidized, air-tight and durable, allowing you to easily remove and re-inject fluid into the entire braking system. This 43mm master cylinder adapter is also fully compatible with our brake bleeder kits and can help you easily remove and refill fluid throughout your brake system.

Suitable for European vehicles Max working pressure 20 psi Waste oil outlet tube with hook: OD 8 mm x ID 5.8 mm, L = 300 mm European adapter: M45 x P3.0 mm / spring clip 1x / hose clamp 1x Oil bottle 400 cc Oil outlet tube: OD 10.5 x ID 7.5mm, L= 600 mm Pressure inlet tube: OD 8 mm x ID 5.8 mm, L = 1000 mm Package dimensions: 260 x 75 x 170 mm

Made out of aluminum to resist corrosion from brake fluid, using soft tube for easy release The one-way valve prevents air from entering the system Simple and easy to connect with the clips to the clutch for bleeding.

3/8'' square drive Applications: Audi, Ford, Honda, Jaguar, Mazda, Mitsubishi, Nissan, Rover, Saab, Seat, Skoda, Subaru, Toyota, Volvo, VW

Contains: 1/2” Dr. 5-point pentagonal sockets: 10, 12.5, 14, 19 mm 1/2" Dr. 7-point sockets: 14 mm, 22 mm 1/2'' Dr. 10-point sockets: 11.5 mm, 15 mm, 20 mm 3/8" Dr. bit socket: H7 (L = 24 mm), H7 (L = 71 mm), H7 (L = 92 mm), H8 (L = 24 mm), H9 (L = 48 mm), H11 (100 mm); H7, H8 (L = 24 mm) 1/2'' Dr. bit socket: 10mm (L = 53 mm) 1/4'' Dr. bit socket: H9 (L = 20 mm) Made of CrMo and CrV steel

Adjustable 2 pin adaptor fits most vehicles Adjustable 3 pin adaptor use with electronic park brake Applicable to:Audi, BMW, Iveco Daily, Renault, Range Rover, Seat, VW, Volvo

Designed for removing brake cylinder rings

Brake disc lip removal tool kit, for removal of the corrosion and ridge that builds up on brakes discs and hubs An easy to use kit for the removal of the corrosion and lip that builds up on brakes discs and hubs Extremely useful to remove the metallic lip around the edge of the disc Turn whilst holding the scraper against the brake disc to "machine" off rust and corrosion By unscrewing the handle on the scraper, the tungsten steel blade head jaws are released and the blade can be either rotated or replaced The brake disc rotation handle is not included in the kit!

Professional, highly efficient, and safe Universal cap adapters are included, which cover more than 90% of vehicles on the market Quick and easy brake fluid exchange, no need to remove brake system components Pressure-type brake fluid exchange allows thorough flushing of the brake fluid pipeline system and prevents new brake fluid from secondary pollution Two pumps work at the same time, doubling the exchanging speed and avoids wasting brake fluid This type of fluid exchange is safer than the traditional way of replacing fluid. It helps to avoid wear and tear of parts - causing unwanted leakage Adjustable exchanging speed Automatical shut-off when the new fluid volume reaches a minimum fluid level with a warning signal Voltage 220 - 240 V Power 55 W Working pressure 1.0 - 2.2 bar Max working pressure 2.8 bar Transfer hose 4 m Accessories: New fluid tank 5 L - 1 pc Used fluid tank 1 L - 2 pcs Adapter set - 15 pcs

A set for aluminum and copper brake lines and for making conical connection flanges The whole set is placed in a handy suitcase that facilitates transport and storage 7 adapters 5, 6, 8, 10, 12, 14, 16 mm Pipe press Pipe cutter

17 pcs. Adapters 2 pcs. Brake Caliper Piston (left and right handed) 2 pcs. Plate Applications: Alfa Romeo, Audi, Austin, BMW, Citroen, Ford, Honda, Jaguar, Land Rover, Mazda, Mercedes, Mitsubishi, Nissan, Vauxhall, Opel, Renault, Rover, Saab, Subaru, Toyota and VW

For drum brakes

Brake caliper hook set for hanging the caliper during brake repairs. The hooks support the removed caliper so it does not hang on the brake hose and damage it, making work on discs and pads easier.Brand: ELLIENT TOOLSSet contents: 2 pcs

3/8'' square drive Applications: Audi 80, 90, V8s, Ford, Sierra (ABS), Granada, Ford (Australia/NZ), Telstar, Laser, Honda Prelude, Jaguar XJ40, Mazda 323, 326, Mitsubishi Galant GLSi, Nissan Silvia 1.8 Turbo, Rover 800 Series, Saab 9000, Subaru L & Series 2, Toyota Celica, Corolla GT, MR2, VW Gold, Passat

Fitted with tommy bar, but can be used with 1/2" drive ratchet wrench or spanner Suitable for most ATE, Bendix, Delco and Girling calippers Applications: Alfa, Audi, Fiat, Ford, Nissan, Peugeot, Renault, Rover, Vauxhall/Opel, VW, Porsche

9x11 mm, 13x14 mm, 16x17 mm