Side-mounted induction coils for DAWELL induction heaters Application: for loosening bearings, screws, gears, glued and corroded joints, etc. Easy exchange for fast and comfortable work

Applicable in automotive, railway and shipbuilding industry, metalworking and maintenance It finds application in operations that require speed and flexibility and pose a risk of damage around heated parts with naked flame (upholstery, pain, rubber sleeves, electrical installation, etc.). Facilitates removal of rusty bolts and old parts, heating of exhaust pipelines, bolts, nuts, bearings, tools before hardening, gluing, soldering, and ideal for defrosting It replaces heating by oxyacetylene and butane-propane flame Voltage 220V, 50Hz Power supply cable 1.5 m Coil gun holder 0.8 m Power 1.5 kW / 3.2 kVA Consumption 8 A Do not exceed the operating cycle DIH-1.5kW – 2 minutes heating (on) a 2 minutes cooling (off) Ingress Protection Code IP20 Operating frequency 25 - 65 kHz, automatic adjustment Equipment of protection class I Protection against overheating and overload of the source and short circuit of the coil Flame- and spark-free heating Fan cooling Output short circuit protection PF (power factor) 0.99 (PFC) Continuous heater / loader 100 % IGBT transistors Coil circuit break protection Dimensions 210 x 140 x 90 mm Weight 4.6 kg 12 month warranty Extension cords – if necessary, you may use only the following extension cords: up to 5 m with 2.5 mm2 diameter up to 15 m with 4 mm2 diameter When using the device with an alternate source of power – e.g. with mobile electric generator, it is necessary to use a quality alternate source of sufficient power and AVR quality control Use a generator with a power output of at least 3-4 kW, or DC / AC inverter with a power output of 2-3 kW and only with a sine wave – do not use the inverter with a square or quasi-sine wave Failure to comply with the above requirements may result in damage to the device and void the warranty

Johny 16.00 Applicable in automotive, railway and shipbuilding industry, metalworking and maintenance It finds application in operations that require speed and flexibility and pose a risk of damage around heated parts with naked flame (upholstery, pain, rubber sleeves, electrical installation, etc.). Facilitates removal of rusty bolts and old parts, heating of exhaust pipelines, bolts, nuts, bearings, tools before hardening, gluing, soldering, and ideal for defrosting It replaces heating by oxyacetylene and butane-propane flame Voltage 220V, 50Hz Power supply cable 3 m Coil gun holder 0.7 m Power 1.5 kW / 3.2 kVA Consumption 8 A Do not exceed the operating cycle DHI-15 – 2 minutes heating (on) a 2 minutes cooling (off) Ingress Protection Code IP20 Operating frequency 25 - 60 kHz, automatic adjustment Equipment of protection class I LED illumination in front of the induction coil Protection against overheating and overload of the source and short circuit of the coil Flame- and spark-free heating Fan cooling Output short circuit protection PF (power factor) 0.99 (PFC) Continuous heater / loader 100 % IGBT transistors Coil circuit break protection Dimensions 200 x 140 x 75 mm Set includes 4 pcs heating coils (1 pcs flexible, 1pc flat, and 2 pcs fixed coils 19 mm (M8), 26 mm (M12) Weight 4.5 kg 12 month warranty Extension cords – if necessary, you may use only the following extension cords: up to 5 m with 2.5 mm2 diameter up to 15 m with 4 mm2 diameter When using the device with an alternate source of power – e.g. with mobile electric generator, it is necessary to use a quality alternate source of sufficient power and AVR quality control Use a generator with a power output of at least 3-4 kW, or DC / AC inverter with a power output of 2-3 kW and only with a sine wave – do not use the inverter with a square or quasi-sine wave Failure to comply with the above requirements may result in damage to the device and void the warranty

The DHI-44E LKW INDUCTION HEATER is a portable water-cooled induction heater with a two-meter induction burner and optional replaceable focus coil extenders The device is designed for heating ferromagnetic and conductive materials Its compact and lightweight design, high power output and ease of use make it ideal for workshops, car repair shops, maintenance shops and the repair industry in general A significant advantage of the DHI-44 LKW compared to other heating methods is its safety, simplicity and high speed of heating and application, particularly compared to flame heating Higher security and better working conditions for operators The operator is not exposed to open flame, hot gases and the risk of fire and explosion when using a flame There is no need for regular staff to work on autogenous and PB burners Low operating costs and low cost of consumables, low power consumption, energy-efficient heating system Use: Automotive, railway and shipbuilding industry, production, mechanical, servicing workshops, repair shops, assembly plants, heating and plumbing, home workshops, etc. Production, repair, renovation, maintenance Workshops requiring heating of bolts, round steel, sections, sheets, bearings, bushes, drive shafts, hinges, nuts, pipes, cogwheels, bearing mountings, shafts, lambda probes, parts and components of machines and cars, exhaust systems, belt pulleys, sleeves, etc. Heating tools and parts for hardening, gluing, soldering Defrosting Same applications as gas and oxy acetylene burners Supported functions: Dawell Heating Control System 3; Boost Induction Power Technology; Dynamic Induction Power Adjust; Quiet Cooling Technology; Automatic Check And Monitor System; Device Firmware Update Power supply 230V 50/60 Hz Input power 3.7 kW Output induction power 4 kVA Power factor for 100% output 1 Consumption 16 A Protective system IP22 Working frequency 18-60 Hz Output control (CP mode) 10-100% of Pmax, fluent Induction burner length 2 m Coolant capacity 2.5 l Weight 13.5 kg, including water cooling, small dimensions – size of a small welding machine Package size 700 x 350 x 300 mm - 16 kg

The dent repair tool can flameless heat the panel behind the paint from the outside of the panel, and the body is restored to its pre-deformed position by induction heating expansion, which is not harmful to the paint. With a maximum output of 1.38KW, this dent repair tool effectively repairs small dents on body and door surfaces. It saves you a lot of time during the repair process. The induction heater has multiple heat dissipation ports at the back and bottom, which can effectively dissipate heat and prolong the service life of the machine. The induction heater with adjustment buttons, you can select the right power by the up or down button to repair different degrees of dents more precisely. The metal body has a smooth surface for easy cleaning. You can wipe it with a wet rag after the power is off. Voltage 220V, 50Hz Power supply cable 1.5 m Power 1.38 kW / 3.0 kVA / 1000W Operating frequency 150 kHz Dimensions 135 x 250 x 75 mm Weight 4.0 kg 12 month warranty Notes 1. To avoid causing damage to surface painting, do not apply heating on a single dent for a long time. 2. After 3-5 times heating, use a wet towel to reduce surface temperature. 3. Do not let the heating head touch the surface painting, leave a gap of 3-5mm. 4. During the heating process, the painting surface becomes soft, applying pressure on the surface will increase the dent.