This ball joint extractor is designed for pressing ball joints and tie rod ends out of the tapered seat in the steering knuckle or control arm. It helps separate the joint without hammering, making it useful for suspension and steering repairs.Brand: KingRoyUse: ball joints and tie rod endsAvailable sizes: 18mm, 23mm, 29mm, 46mm

1 pcs. Ball joint extractor (fork size 17.4 mm) 1 pcs. Ball joint extractor (fork size 23.8 mm) 1 pcs. Ball joint extractor (fork size 28.5 mm) Two exchangeable handles Material forged carbon steel

Jaw capacity 19 mm

Ball joint puller for separating ball joints and tie rod ends from the steering knuckle or control arm. It presses the tapered pin out of its seat without hammering and without damaging the parts.Application: ball joints, tie rod endsType: joint puller

For European trucks including SCANIA, BENZ, MAN, HINO and other Jaw capacity 39 mm Screw depth 120 mm Nut width 26 mm Heavy duty Forged steel

For European trucks including SCANIA, BENZ, MAN, HINO and other Jaw capacity 39 mm Screw depth 120 mm Nut M24x3.0 (width 26 mm) Heavy duty Forged steel

Jaw capacity 20 mm Maximum opening capacity 30, 50 mm Forged steel body

Jaw capacity 18 -24 mm Maximum opening capacity 50, 80 mm Forged steel body

Jaw capacity 19 mm

Ball joint separator for detaching ball joints and tie rod ends from the steering knuckle or control arm. It helps press the tapered pin out of its seat without damaging parts during suspension and steering repairs.Application: ball joints, tie rod endsAvailable sizes: 23 mm, 34 mm

Jaw capacity 22 mm

Ball joint separator, size 17 mm. Designed for separating ball joints and tie rod ends from the steering knuckle or control arm during suspension and steering repairs.Size: 17 mmUse: suspension and steering repair

Drop forged and heat treted alloy steel. Satin finish. Fork size 19 mm L = 400 mm

Drop forged and heat treted alloy steel. Satin finish. Fork size 24 mm L= 300 mm

Capacity 8.8-10.5 t For trucks HINO, ISUZU, UD, FUSO Jaw capacity 47 mm Jaw depth 63 mm

Capacity 15-35 t For trucks HINO, ISUZU, NISSAN, FUSO and buses Jaw capacity 62 mm Jaw depth 75 mm

Jaw capacity 20 mm Total length 165 mm Opening capacity 24, 30, 40, 45 mm

1 pcs. Pitman arm / tie rod end puller 1 pcs. Ball joint seperator 1 pcs. Pitman arm puller 1 pcs. Ball joint / tie rod end remover 1 pcs. Tie rod / bearing race puller

1 pcs. Pitman arm/Tie rod end puller 1 pcs. Ball joint seperator 1 pcs. Pitman arm puller 1 pcs. Ball joint/Tie rod end remover 1 pcs. Tie rod/Bearing race puller

Provides ultimate brute strength for disassembling even the most seized u-joints in minutes on virtually all class 6-8 cars, light-duty trucks and farm machinery. Compatible with Spicer drivelines 1610 / 1710 / 1760 / 1810 / 1880 Series Compatible with Spicer SPL 140 / 170 / 250 Life Series Compatible with Meritor (Rockwell) 16N / 17N / 18N / 1710 Series Compatible with Meritor RPL 20 / 25 Permalube Series. Used with up to a 1″ impact wrench and work with U-Joint bearing cups from 1.5″ to 2.2″ O.D. Provides the most effective mechanical advantage for easy disassembly. Reduces risk of damage to the driveshaft, yokes, joints or bearing caps. Eliminates dangerous vice and socket, or hammering methods. Removes sealed u-joint cups in minutes. Premium grade heavy duty carbon steel with black anodized finish Superior durability and strength Anti-corrosion and anti-rust Anti-impact, anti-deformation Manufactured to OEM specifications High precision and toughness to provide a much longer service life.

Practical: the 3/8" Inner Tie Rod Tool turns smooth tie rods easily and removes inner tie rods without removing the outer tie rod Compatibility: fit for all standard tie rods with smooth cylinder ends Work on any rod that fits between the 76.2 mm top and bottom components with both 14.29 mm nuts screwed on and tightened Easy to use: simply slide tool over the end and tighten collar to allow access with a 9.5 mm drive extension Adapters can be used for larger breaker bars/extensions Strong grip: tool teeth grip the tie rod securely as you plug in a socket wrench or breaker bar and turn these smooth tie rod ends Convenient: design with compact/low profile means no bulky tool to store Best tool for servicing inner tie rods to easily remove, repair and install

Tool for removing and installing track rod ends (inner tie rod joints) during steering repairs. It makes it easy to unscrew and fit track rod ends without damaging them or the surrounding parts.Range: Ø27–42 mmApplication: removing and installing track rod ends

Ø30 - 35 mm, Ø35 - 40 mm, Ø40 - 45 mm

For most models of outer tie rods Jaw reach 76 mm (3") Weight 1500 g Material CrV steel