Article No.: 12 52 195 EAN: 4003773085829 Stripping capacity 0.08 — 16.0 mm² Simple, precise stripping of fine wires and solid round cables with a wide capacity range from 0.08 to 16 mm² with only one pair of pliers Good grip provided by semi-circular grooved metal holding clamps, exact cut thanks to parabolic stripping blade A patented automatism regulates the depth of the cut, the neutral point of the automatism can be adjusted in fine steps in special operating conditions (insulation material, temperature) With adjustable length stop for precision work repeated accurately each time Inscription area for customisation Comfortable operation with ergonomic dual-component handle With tether attachment point, suitable for KNIPEX Tethered Tools accessories Easily replaceable blade cassette Length 190 mm x 120 x 28 mm Weight 180 g

Article No:. 16 20 165 SB EAN: 4003773034971 With knife and hook blade, protective cap included For stripping all common round cables Self-tightening holding lever With adjusting screw for cutting depth adjustment Turnable blade for circular and longitudinal cutting Spare blade inside the handle Secure grip due to soft component material on handle and holding lever to avoid slipping Housing: plastic, impact-proof Handles shock-resistant plastic body Stripping capacities (diameter) Ø 8.0 — 28.0 mm Dimensions 165 x 84 x 31 mm Weight 85 g

L=250mm Cable range 0.5-5.5mm²

Professional tweezers with ratchet mechanism for clamping the connector terminals on the wires Supports connectors in the range of 0.2 to 6.0 mm² Made of sheet steel, hardened to about 44 - 47 HRC

Article No.: 97 21 215 C EAN: 4003773019701 For cutting cables, stripping wire and crimping insulated terminals and cable connectors With threaded holes for cutting copper and brass screws threaded 7/64", 1/8", 9/64", 5/32" and 13/64" (M2.6, M3, M3.5, M4 and M5) Bolted joint for higher stability and smooth movement Made of special tool steel, oil-hardened Length 230 mm Width 63 mm Height 25 mm Weight 290 grams Stripping capacity 0.5 to 6.0 mm² / 20 to 10 AWG Crimping Positions - 3 (1.5, 2.5, 6.0)

Pinches with ratchet mechanism for crimping telephone and network terminals. The pliers are made of carbon steel subjected to an oxidation process that protects against corrosion. Two-component plastic handle caps. The harder PP component firmly adheres to the body, while the TPR outer part is pleasant to the touch and has anti-slip properties Possible to crimp the ends RJ10, RJ11, RJ12 telephone ends Capable of crimping RJ45 network ends Capable of quick stripping of insulation with a diameter typical of CAT wires Can cut cable

Article No:. 97 72 180 EAN: 4003773060185 Light and slim design Also as VDE version Easy crimping due to optimised transmission ratio For crimping wire ferrules according to DIN 46228 parts 1 + 4 from 0.25 to 16 mm² Crimping in marked half-round dies for reliable connections between the sleeve and the conductor 9 particularly deep dies with conical side faces Special tool steel, forged, oil-hardened Head polished Handles with multi-component grips Applications Wire ferrules Capacity in square millimetres 0.25 — 16.0 mm² Number of crimping positions 9 AWG 24 — 6 Dimensions 180 x 51 x 22 mm Weight 242 g

L = 130 mm Material Mn65 Hardness of HRC 55 - 57 steel

Article No:. 78 03 125 EAN: 4003773035381 Cutting edge hardness approx. 54 HRC INOX tool steel Precision pliers for ultra fine cutting work, e. g. in electronics and fine mechanics Ground, very sharp cutting edges without bevel Precisely shaped tips cut wires close to a surface from Ø 0.2 mm Shear cut with controlled micro cutting edge misalignment for the most precise cutting of even the thinnest of wires and for a long service life Joint with stainless steel rivet Extremely smooth movement for minimum operator fatigue With opening spring and opening limiter Head polished Handles with multi-component grips Standard DIN ISO 9654 Cutting capacities medium hard wire (diameter) Cutting capacities medium hard wire Ø 1.0 mm Cutting capacities soft wire (diameter) Cutting capacities soft wire Ø 0.2 – 1.6 mm Jaw length (B) 9 mm Jaw thickness (joint) (D) 7.5 mm Head width (A) 13.5 mm Dimensions 125 x 65 x 13 mm Weight 56 g

Article No.: 78 61 140 EAN: 4003773081685 Additional 15 mm longer version: greater stability, greater cutting performance For ultra fine cutting work, e.g. in electronics and fine mechanics In particular for cutting cable ties to length Shear cut with controlled micro cutting edge misalignment for the most precise cutting of even the thinnest of wires and for a long service life Precision-ground cutting edges without bevels with precisely shaped tips cut adjacent wires from Ø 0.2 mm precisely and evenly Joint with stainless steel rivet Extremely smooth movement for minimum operator fatigue With opening spring and opening limiter High load capacity, made of burnished special tool steel, cutting edges additionally induction-hardened to 64 HRC Length 140 mm Width 83 mm Height 14 mm Weight 85 g Cutting capacities: Medium hard wire Ø 1.4 mm Soft wire Ø 2.1 mm Jaw Length (B) 12.3 mm Jaw thickness (D) 9.2 mm Head width (A) 15.7 mm Extremely sharp cutting edges made of rustproof, air-hardened stainless steel The Knipex Electronic Super Knips® is made of surgical steel (INOX steel). For cutting level to surfaces, the cutting edges are ground without a bevel and hardened to approx. 54 HRC. Thanks to the precisely machined tips, even fine wires that are in contact with housings or components can be cut precisely. Dexterity is required when working on electronic components and in fine mechanics. Thanks to its friction-free torsion spring, the Knipex Electronic Super Knips® 78 61 140 is so smooth-action that the force can be controlled very finely when working on electronic components and in fine mechanics. The opening spring and opening limiter make work even easier. Important for electronic work: ESD grips on the handles enable slow, controlled equalisation of any differences in electric potential between the user and sensitive electronic components. A special detail ensures a precise cut and a long service life A special detail enables ultra-precise shear cuts on even the thinnest wires while also lending the pliers a long service life: The extremely sharp cutting edges of the Electronic Super Knips® 78 61 140 are protected against collision after cutting thanks to a micro-cutting edge offset.

Range 0.08 - 4.0 mm²

Pressing jaws Ø16x2.2, Ø20x2.8, Ø25x3.5, Ø32x4.4 mm Expansion head Ø16x2.2, Ø20x2.8, Ø25x3.5, Ø32x4.4 mm Weight: 7.5 kg

Hand pliers with a hydraulic cylinder. Designed for crimping on electric conductors or to tighten ropes. Effective crimping electrical wiring. Clinching rope.

Article No:. 13 96 200 EAN: 4003773075110 6 functions in one pair of pliers To grip flat and round material, for bending, deburring, cutting cable, stripping and crimping wire ferrules Smooth surfaces near the tips grip single cores without damaging them; serrated gripping surfaces and pipe grip for gripping flat and round material Clear-cut outside edge on the gripping surfaces for working on flush-mounted junction boxes and deburring feed-through holes Stripping holes for conductors of 0.75 - 1.5 mm² and 2.5 mm² Crimping die for wire ferrules 0.5 - 2.5 mm² Cable shears with (induction-hardened) precision cutting edges for copper and aluminium cables up to 5 x 2.5 mm² / Ø 15 mm Slim dimensions for easy access Bolted joint: precise, zero backlash operation of pliers In case of models with opening spring integrated in the joint, the activated locking lever keeps the cutting edges closed while other functions remain active The intelligent latching mechanism enables you to "grip" without opening the pliers. The cutting edge remains closed and protected. Stripping capacity for single strands 0.75 - 1.5 mm² / 2.5 mm² Capacity in square milimeters 0.5 - 2.5 mm² Cutting capacities copper cable, multiple stranded Ø 15 mm Cutting capacities copper cable, multiple stranded 50 mm² VDE tested: yes Dimensions 200 x 85 x 20 mm Standard DIN EN 60900 IEC 60900 Weight 276 g

L= 260 mm Cable range 0.5-10.0 mm² 4 pcs. Changeable tips

Pliers with interchangeable dies for crimping the most common types of connectors. The ratchet mechanism allows you to clamp the connector on the cable without applying much effort. The dies made of CrMo steel guarantee precision crimping even after many months of regular use. 5 interchangeable crimping dies for the most common connector types: non-insulated, insulated, crimp, sleeve ratchet mechanism with adjustable clamping force two-component pen caps: The solid polypropylene component fits tightly to the handle Anti-slip and soft TPR component on the outside improves grip and comfort blackened surface protects against corrosion convenient carrying case

L= 180 mm Cable range 0.08-2.0 mm²

L= 230 mm Cable range 0.5-6.0 mm²

L= 230 mm Cable range 1.5-10.0 mm²

With ratchet mechanism L= 230 mm Cable range 0.5-6.0 mm²

Ratchet type L= 175 mm For wire thickness 0.25-6.0 mm² Made of CrV steel Optimized clamping with precisely formed contours and auto-releasing ratchet Suitable for bare wire lugs and insulated wire lugs The crimping jaws are automatically released to maintain a high quality crimping standard during re-crimping

Ratchet type L= 175 mm For wire thickness 0.25-6.0 mm² Made of high-quality steel HRC35-42° The unique hexagonal crimping design of the ferrule pliers head, the precise clamping hole of the terminals does not damage the wire, PVC non-slip handle design, thickened and comfortable for users to hold For solderless and standard electrical connections, suitable for bare wire lugs and insulated wire lugs

For insulated terminals With locking mechanism L= 228 mm Cable range 0.5-6.0 mm² AWG 22-18 / 0.5-1 mm² AWG 16-14 / 1.1-2.5 mm² AWG 12-10 / 4-6 mm²

For non-insulated terminals With locking mechanism L= 228 mm Cable range 0.5-6.0 mm² AWG 22-18 / 0.5-1 mm² AWG 16-14 / 1.1-2.5 mm² AWG 12-10 / 4-6 mm²