Air Conditioner Cleaner is a most recently developed special cleaner for air conditioners that ensures an optimal cleaning of the air conditioner and the neutralisation of unpleasant smells during its use. It effectively cleans the outer and inner devices of the air conditioning system, eliminating fungi, pathogenic micro-organisms and viruses as well as prevents them from re-forming. A regular application of this product removes the negative influence of the air conditioner on your health. Warm up the engine. Remove the cabin filter. In order to dry the air-con surface set the following heating and ventilation conditions for 10 minutes: windows OPEN, engine OFF, air-con OFF, recirculation ON, air distribution set to the footwell, temperature and fan speed set to MAX. Before applying the product switch recirculation OFF, set air distribution to the windscreen. Insert the probe into the cabin air filter opening(s) as well as into the ventilation openings and apply the product. 250 ml are sufficient for one application. Leave for 15 to 30 minutes. Dry the air-con at the same settings as described above. Install the cabin filter. Use disinfectants with care. If product is spilled wipe up immediately. Contains bronopol 1,1 g/L N-67445.

ISO Viscosity Grade 100 A highly-purified mineral-based oil for the lubrication of cutting edges of petrol and electric saws with a manual and automatic oil supply Product properties: It has an optimal viscosity for effective lubrication, it does not splash during operation It has high adhesive properties that ensure a good oil adhesion to the chain during operation Great lubricating and antiwear properties extend the service life of the chain It ensures reduced oil consumption and heating of the parts It has excellent antioxidizing and anticorrosion properties It can be used throughout the year. It ensures a reliable lubrication at up to -15 °С It is designed for use in all types of powerful motorized chain saws under extreme conditions, including hardwood sawing

ISO Viscosity Grade 100 A highly-purified mineral-based oil for the lubrication of cutting edges of petrol and electric saws with a manual and automatic oil supply Product properties: It has an optimal viscosity for effective lubrication, it does not splash during operation It has high adhesive properties that ensure a good oil adhesion to the chain during operation Great lubricating and antiwear properties extend the service life of the chain It ensures reduced oil consumption and heating of the parts It has excellent antioxidizing and anticorrosion properties It can be used throughout the year. It ensures a reliable lubrication at up to -15 °С It is designed for use in all types of powerful motorized chain saws under extreme conditions, including hardwood sawing

ISO Viscosity Grade 100 A highly-purified mineral-based oil for the lubrication of cutting edges of petrol and electric saws with a manual and automatic oil supply Product properties: It has an optimal viscosity for effective lubrication, it does not splash during operation It has high adhesive properties that ensure a good oil adhesion to the chain during operation Great lubricating and antiwear properties extend the service life of the chain It ensures reduced oil consumption and heating of the parts It has excellent antioxidizing and anticorrosion properties It can be used throughout the year. It ensures a reliable lubrication at up to -15 °С It is designed for use in all types of powerful motorized chain saws under extreme conditions, including hardwood sawing

Size 946 ml (32 oz.) Colour black Designed to seal a tire and rim Suitable for all tyre sizes Brush in can

Capacity 8 ml Suitable for repairing tires and tires

Capacity 8 ml Suitable for repairing tires and tires

Tire vulcanizing liquid MARUNI SUPER VALKARN G CFC-FREE Very fast drying, use with a brush Color: Green Quantity: 200ml / 280g

Size 236 ml (8 oz.) For chemical or heat vulcanization The flammable vulcanizing cement is our most popular fast dry cement Use this cement with any Xtra Seal repair unit or insert When used on large reinforced patches, coat entire patch and inner liner with cement Brush in can

Talpa 236 ml Cheminiam arba terminiam vulkanizavimui Greitai džiūstantis cementas Sudėtyje yra daugiau gumos kietųjų dalelių nei įprastame cemente, kad sukibimas būtų stipresnis SUPER-BLU (šviesiai mėlyna spalva) Su teptuku Tinka kameroms, padangoms

Water-based professional cleaning concentrate for exhaust aftertreatment systems and selected mechanical components Designed for use in common cleaning machines and diluted with water at a concentration of 3–10% depending on the degree of contamination The low-foaming formulation contains corrosion protection for material-friendly cleaning. Type: alkaline, aqueous high-performance cleaning concentrate Application concentration: 3–10% pH value: <11 Color: blue Density: 1.05–1.07 g/cm³ Foaming behavior: non-foaming / low-foaming Oduor: characteristic CLP labelling: none required Suitable for: Diesel particulate filters (DPF); FAP filters; SCR systems; Catalytic converters Also suitable for selected mechanical components such as: Oil filters; Pistons; Injection nozzles; Tools Removes: Soot; Ash deposits; Carbon deposits and coking; Oil carbon and graphite; Grease and oil contamination Benefits: Low-foaming formulation for reliable machine use; Integrated corrosion protection for material-friendly cleaning; Demulsifying and suitable for use with oil separators; Labelling-free according to the CLP Regulation Recommended concentration for 10 L of ready-to-use cleaning solution: 3% = 0.3 L concentrate + 9.7 L water 5% = 0.5 L concentrate + 9.5 L water 10% = 1.0 L concentrate + 9.0 L water Start with the lowest suitable concentration and increase the dosage only when required by the degree of contamination Cleaning instructions: 1. Remove the filter or component according to the vehicle or equipment manufacturer’s instructions 2. Dilute the concentrate with water according to the degree of contamination 3. Fill the cleaning machine with the prepared solution and position the component according to the machine manufacturer’s instructions 4. Run the cleaning cycle using the operating time, temperature and procedure specified by the machine manufacturer 5. For heavily contaminated components, increase the concentration within the recommended 3–10% range or repeat the cleaning cycle if necessary 6. After cleaning, complete the rinsing and drying procedure specified by the machine manufacturer 7. Ensure the component is completely ready for installation before refitting

DPF foam cleaner is used to remedy reductions in performance and malfunctions caused by soiled diesel particulate filters Cleaning restores the full flow capacity of the filter Loosens and removes carbon deposits in particulate filters Removal of the DPF not necessary for cleaning Saves money, as a new particulate filter may not need to be installed (this depends on the condition of the particulate filter) Not flammable, neutral ash- and metal-free formula Evaporates without leaving residue behind Application: Remove the temperature or pressure sensor. Insert the tube through the opening which has been made and empty in the direction of the particulate filter by using puffs in ten-second intervals. Regeneration must then be initiated manually by the tester or by taking a test drive. After regeneration, query the error memory and clear any errors which may be present. One can is sufficient for a particulate filter.

Gasket maker red is a sealant, vulcanising into silicone rubber at room temperature It is exceptionally resistant to the influence of extreme temperatures It creates a reliable seal that will not crack, does not shrink and shift under the influence of sudden temperature changes It replaces O-rings, washers as well as asbestos, rubber, felt, paper, cork and metal seals It can be effectively used for repairing the following components: valve trains, transmission oil pans, thermostat housings It is resistant to the influence of lubricants, coolants, petrol, kerosene, water, acid solutions and alkalis It is easy to apply and remains flexible The working temperature is from -50 °C to +300 °C, storage temperature is from+5 °C to +25 °C

A kit for a complete headlight upgrade, nothing extra to buy Usage: clean the headlight with plain water, wrap a strip around the lamp to avoid damaging the body Moisten the lamp and sand, starting with 800 grit sandpaper, then 1200 and finally 2000 (use all several times with each time the lamp is moistened) Continue polishing with paste and orange sponge Finally, apply UV protection with a white sponge, polish for about 1 minute and allow to dry Leave for 2 hours for complete drying The polishing disc can be used with a cordless screwdriver

2 pcs. 3ml UV Protection Liquid 2 pcs. Sanding Disc P800 2 pcs. Sanding Disc P1200 2 pcs. Sanding Disc P2000 1 pc. 85g Polish Paste 1 pc. Masking tape 1 pc. Orange Sponge Disc 1 pc. Cleaning colth 1 pc. Polishing pad M10 with thread 1 pc. Adaptor 1 pc. Instruction manual

MANNOL 9964 air filter lubricant/impregnator 200ml is intended for zero resistance air filters. The product has water repellency and dust retention properties. When operating a motorcycle in difficult conditions (off-road driving, high revs, dusty conditions), it is advisable to use the product every 5000 km, when operating in normal conditions every 10000 km. Properties: - Provides maximum air supply, increasing engine power; - Reliably holds dust, dirt and sand in the most extreme conditions. Reduces wear and extends the oil change interval. Eliminates engine damage caused by contamination, extends its life and reduces maintenance and repair costs; - Provides excellent adhesive properties of the filter, so that it effectively detains even the smallest dust particles, while it is securely held on the surface of the filter elements; - Recommended for use in Motorsport; - Colors the filter in tints from pale pink to red, and the color may appear immediately or after a while; - Completely eliminates the risk of destruction of HIGH-FLOW filters during operation. Application: Remove the filter. Clean the filter surface from coarse dust and dirt particles by tapping and then using a soft-pile brush. Apply MANNOL Universal Cleaner 9972 on both sides of the filter. Let it soak in. After 10 minutes, rinse the filter in a container of water, then under a low stream of water. Dry the filter well. Shake the container and spray 9964 MANNOL Air Filter Oil on the filter from a distance of 20-30 cm. Mash the filter to achieve the best penetration of the impregnation into the filter. Let it dry for 15 minutes.

Air-Con Fresh is a prophylactic agent for deodorisation in vehicle air conditioners, ventilation ducts or vehicle air ducts without removing the cabin filter It effectively and quickly removes unpleasant smells, bacteria, fungi and prevents them from re-forming It leaves a fresh and pleasant aroma This product prevents allergic diseases In order to dry the evaporator surface run the engine and set the following heating and ventilation conditions for 10 minutes: air conditioner OFF, recirculation ON, air distribution set to the footwell, set temperature and fan speed to max. Shake the can well before use. Place the Air-Con Fresh in the intake area of the air circulation system (mostly passanger footwell) and switch air distribution to windshield. Then press the sprayhead until it locks. Keep windows and doors closed for 10 minutes. Dry the evaporator at the same settings as described above. Switch off the engine and ventilate the interior for 10 minutes. Use disinfectants safely. Always read the label and product information before use.

Schleifpaste Profi Set is a set of professional diatomite abrasive pastes for manual and MECHANICAL polishing of paint coatings. Pastes differ in the grain size of the abrasives. MANNOL Schleifpaste No. 1 removes deep scratches, damaged, oxidized or dull top layers of paint due to the large abrasive grains contained in it. It allows you to easily remove smudges and stains of lacquers and paints during the restoration of the body, as well as adjust the color shades during partial painting. MANNOL Schleifpaste No. 2 removes small scratches, minor defects in paint coatings and solidified residues of petroleum products due to the micro abrasive components contained. It easily removes excess varnish after painting the body, facilitates deep cleaning of the surface, removes rust and aggressive substances from the micro cracks of the paintwork and individual chrome parts. Sizes of abrasive particles: MANNOL Schleif Paste No. 1 – 75 microns, MANNOL Schleif Paste No. 2 – 3 microns. Application: Clean the surfaces to be treated. RUB MANNOL Schleif paste No. 1 on small areas with a cloth or sponge, with the necessary pressure, Until the damaged and oxidized layers of the previous coating, rust, oxides, dirt and scratches are removed. For a mirror-like finish, apply MANNOL Schleif Paste No. 2 liberally to the surface using the supplied wet cloth and Polish it, then rinse it off.

Brake cleaner / Metal Parts Cleaner / Degreaser A solvent blend for cleaning and degreasing metal parts. Designed for effective cleaning of brake drums, discs, pads, cylinders and clutch parts. Quickly and effectively removes dirt, dust, grease and brake fluid. Dries quickly and leaves no residue. Features and Benefits: Removes brake fluid, oil, tar, grease and other contaminants Cleans without stripping Eliminates brake squeal and clutch slippage caused by dirt or burn-in Dries quickly and leaves no residue How to use: Spray, brush or dip. Follow safety precautions for flammable liquids. Allow to absorb, then wipe off with a dry cloth. Storage: Store below 50°C. Avoid direct sunlight.

MANNOL Brake Cleaner is a special cleaner for all separate parts in the motor vehicle breaking system. It has excellent cleaning properties and is applicable to brake shoes and discs. It removes soiling, oil, grease, brake fluid, other petrochemicals and burnt technical fluids.

Synthetic brake fluid based on polyglycols and esters, containing corrosion and oxidation inhibitors Designed for hydraulic systems of all traditional brake devices and clutches Product properties: Contains boric acid, which completely neutralizes water condensate Provides reliable operation of the brake system at any ambient temperature due to the increased boiling point (>245 °C) and excellent low-temperature properties (up to -40 °C) Has the highest chemical and thermal stability Offers excellent lubricity and viscosity-temperature properties Neutralizes the formation of vapour bubbles Compatible with elastomers Entirely inactive for the parts of the brake system Aggressive to paintwork Color: colorless / light brown Recommendation: SAE J1703/J1704 ISO 4925 FMVSS 116 DOT 4 JIS JAPAN K2233

Carburetor cleaner is an effective cleaning agent for the carburetor without removing it It removes high-temperature deposits from the inner and outer surface of the carburetor It completely optimises the function of the fuel system This product is applicable to two- and four-stroke petrol engines with and without catalyst

Carburetor cleaner is an effective cleaning agent for the carburetor without removing it It removes high-temperature deposits from the inner and outer surface of the carburetor It completely optimises the function of the fuel system This product is applicable to two- and four-stroke petrol engines with and without catalyst

MANNOL Chain Cleaner is a special agent for quick and easy cleaning of chains and separate parts in motorcycles This product has a good penetrating ability and excellent dissolving properties. It facilitates removing tar deposits and tar oil as well as petrolic and grease soling