It is intended for cleaning hands from strong industrial and household pollution both in auto repair shops and in the household Contains non-hazardous food solvents, surfactants and abrasive powder Has a slightly alkaline pH value of ordinary solid soap (pH 9,5) – not dangerous for the skin of hands Gently and effectively removes the most ingrained dirt and the most persistent dirt, including: oils, resins, bitumen, paints, varnishes, adhesives, sealants, soot, carbon deposits, etc. without having a harmful effect on the hands, without damaging the skin and leaving a pleasant feeling on the skin Hypoallergenic Application: wet your hands with water and apply a small amount of paste, rub thoroughly and rinse with water. Repeat the procedure if necessary

Cockpit Care is a preservative-protector of plastic with a pleasant smell, which serves as its cleaner and at the same time as a protective varnish. Compatible with all plastics used in cars. Properties: - Protects surfaces from cracking, drying and fading; - Gives the treated surface an initial shine and has an antistatic effect that prevents the accumulation of dust; - Recommended for external and internal treatment of plastic parts, as well as rubber and vinyl surfaces. Application: Clean the surface to be treated before use. Shake the can well before use. Do not spray directly on plastic surfaces. Instead, apply to a dry sponge or cloth and wipe the surface thoroughly. Avoid applying to glass or fabric surfaces. Do not use on the steering wheel, pedals, or door handles.

Cockpit-Reiniger is a dashboard cleaner with a pleasant smell, designed to remove dirt and to protect from cracking and drying out. Properties: Has excellent cleaning properties; Forms a strong polymer layer of silicone molecules on the treated surface which is resistant to UV radiation and gives the surface excellent waterproof and antistatic properties; Can be used for the care of internal coatings made of synthetic material and plastic. Application: Clean the surface to be treated before use. Shake the balloon well before use. Do not spray directly on plastic surfaces – instead, apply the cleaner to a dry sponge or cloth and wipe the surface thoroughly. Avoid contact with glass or fabric surfaces. Do not use on the steering wheel, pedals or door handles.

Cockpit-Reiniger is a dashboard cleaner with a pleasant smell, designed to remove dirt and to protect from cracking and drying out. Properties: Has excellent cleaning properties; Forms a strong polymer layer of silicone molecules on the treated surface which is resistant to UV radiation and gives the surface excellent waterproof and antistatic properties; Can be used for the care of internal coatings made of synthetic material and plastic. Application: Clean the surface to be treated before use. Shake the balloon well before use. Do not spray directly on plastic surfaces – instead, apply the cleaner to a dry sponge or cloth and wipe the surface thoroughly. Avoid contact with glass or fabric surfaces. Do not use on the steering wheel, pedals or door handles.

Contact Cleaner is a special cleaning agent for fast and effective cleaning and degreasing of dirty and rusted electrical contacts of all types. Ideal for: - cleaning of electrical blocks and contacts, electronic circuit boards and terminal blocks, lamp bases, cable lines, communication relays, interrupters, ignition distributors, starters, generators, fuses, etc. in cars; - plug sockets, clamps, electrical distribution devices, battery contacts in industry and everyday life; - audio and video equipment, office and commercial electrical equipment - cash registers, electronic scales, scanners, etc. Properties: - Quickly, efficiently and carefully cleans electrical contacts and connectors, as well as electronic elements from fat and oil films, oxides, phosphates, dust and other insulating contaminants. Reduces the electrical resistance of the contacts and thereby reduces the power loss of electrical equipment and stabilizes the voltage; - Displaces moisture, forms a water-repellent film; - Quickly evaporates without leaving traces and eliminates current leaks and short circuits; - Provides long-term protection of electrical contacts from oxidation, while maintaining their conductivity; - Due to its high penetration capacity, it improves the efficiency and reliability of electronic systems and electrical equipment, preventing failures and failures; - Silicone-free, safe for plastic and rubber parts, as well as for paint coatings; - Can be used for degreasing metal surfaces. Application: Before cleaning, disconnect the electrical circuit. Spray MANNOL Contact Cleaner on dirt and leave for 5-10 minutes to act, depending on the intensity of the contamination. Remove dissolved dirt with a cloth or brush. Remove excess product with a damp cloth. In case of contact with the surface of plastic and lacquered parts, remove the composition with a damp cloth. Before connecting to the electrical circuit, wait 10 minutes for the solvent residue to evaporate.

Copper grease is a high-temperature paste with the addition of a thermally stable aluminium complex as a sealant and a copper filler. It protects effectively from corrosion in aggressive environments and prevents sticking of moving components This product is designed for lubrication of fastenings such as screws, nuts of exhaust systems, brake cylinders, brake callipers, spark plugs, wiring elements, heat exchanger pipes, different hydraulic and pneumatic fastenings Apply to cleaned surfaces using a paint brush, brush or lint-free cloth DIN 51502 MF /3 U-20 NLGI 2/3 Working temperature from -30°C to +1100°C Weight 50g

Copper Spray - universal separating copper aerosol lubricant for various equipment elements operating under any loads (including high loads), and exposed to high temperatures and/or high humidity and/or aggressive environments. It is used to ensure easy disassembly of connections after long-term operation. Eliminates their coupling with each other under the influence of a variety of factors. Properties: - highest resistance to high-temperature impact; - copper powder effectively clads the treated surfaces and gives them excellent lubricating properties; - excellent separating action for metals and alloys in any combination; - effectively protects against all types of corrosion; - excellent adhesion, does not separate and does not spray even with rapid rotation of the treated surface; - reduces noise, creaking and vibration; - resistant to hot and salt water; - protects against welding of contact surfaces, spikes and carbon deposits; - universal. Example of use: - Repair and reduction of noise (creaking) of all types of brake systems (disc, drum, etc.); - Lubrication and corrosion protection of propeller shaft joints, movable screw pairs, hubs, spark plug threads, screw connections, bolts, screws, etc.; - Separating lubrication and protection against welding, burning and jamming of thermally loaded parts (connections of the exhaust system, heat exchangers, boilers, turbines and other thermal equipment). Application: Thoroughly clean (if necessary to metal) contaminated contact surfaces from rust, carbon, oxides, scale, etc. Degrease. Shake the balloon vigorously. Apply MANNOL Copper Spray in the required amount, according to the maintenance manual. After application, clean the spray head and nozzle. You can use the cylinder as long as the cylinder does not start to blow out the clean spray gas. Shelf life: 5 years

Water-miscible greasing and cooling fluid (GCF) with a high content of mineral oil and a highly effective additive package, providing multi functionality and stability of the emulsion for machining ferrous and non-ferrous metals. Product properties: - Mixes easily with water; - Long service life of the emulsion; - Economical to use; - High stability of the emulsion; - Good lubricating properties; - Good anti-corrosion properties; - Good lubricating properties - reduces friction in the processing zone and reduces all types of tool wear; - Reliably removes heat from the treatment area; - It is possible to use water of a wide range of hardness (up to 12 °e). For processing by pressure (pressing, bending, etc.) and cutting (turning, milling, drilling, cutting, drawing, threading, grinding) all types of cast irons and steels, all types of non-ferrous metals and their alloys. Recommended concentration ± 5% depending on the processing mode of a particular metal.

Epoxidkitt is a two-component super-putty based on epoxy resin for quick repairs with a long-lasting effect. Fills holes, scratches, cracks, cavities, and dents. Easily mixed by hand and takes any shape. Designed to repair surfaces made of any metals and alloys (steel, cast iron, aluminum, copper, brass, bronze, magnesium, tin, lead, etc.) and any plastics. It can be used to eliminate leaks in the gas tank, radiator, oil pan, barrels, pipes, etc. Applicable under water. Retains its properties up to 260 °C. Properties: - Excellent chemical and mechanical resistance; - Hardens quickly under all conditions, even under water; - Durable; - After final solidification, any mechanical processing with chip removal is possible (drilling, sawing, threading, sanding, etc.), and then painting or varnishing; - does not contain asbestos and is an electrical insulator; - can be used for glass, ceramics, concrete, wood, etc. Application: Thoroughly clean the surface of old paint and other coatings, dirt, fat and oil deposits. Degrease using 9691 MANNOL Brake Cleaner. Dry. For best adhesion, the surface can be roughened with sandpaper. Putty can be made at any temperature and humidity, but the optimal temperature is from +10 °С to +30 °C and humidity of 50-60%. Squeeze out of the tube and cut off the desired amount. Mash with your hands until a homogeneous warm mass is obtained. Flatten and remove excess with a spatula. Curing begins in 15 minutes. Complete hardening occurs in 1 hour. When applied under water or on an oiled surface, the compound must be pressed with a spatula until it begins to harden.

Designed for quick and reliable bonding of steel, aluminum, brass, copper, iron, tin, lead and various alloys It hardens within 4 minutes Final curing occurs within 2-3 hours, the connection gains high mechanical shear strength (3-5 N/mm2) and can withstand temperatures of up to 150 °C It is suitable for filling cracks and cavities, drilled holes, for repairing damaged screw threads and can also be used as a filler for flat surfaces This product also bonds ceramics, concrete, wood and their compounds The surfaces have to be clean and grease-free to achieve the best adhesion results Squeeze the required amounts of the two components out of the tube and mix them Then apply to the dry, oil-free surfaces to be glued together and squeeze tightly to each other with maximum force

Two-component adhesive that is designed for a quick and extremely strong bonding of all types of plastic separate parts: bumpers, headlights, spoilers etc. The mixture hardens in 5 minutes at room temperature Within 30 minutes the sealant structures to 80 % Final curing occurs within 2-3 hours The adhesive is resistant to mechanical influences Thanks to its transparent matt texture this product is suitable for cosmetic repairs as well as for filling cracks, cavities and wrongly drilled holes etc Squeeze the required amount of the two components from the tube and mix them Then apply on the dry as well as fat-free surfaces to be glued together and press tight. Store tightly closed in the original container in dry conditions from +5 °C up to +25 °C

Universal, synthetic, all-season oil for motorbike forks and shock absorbers with the most popular SAE 10W viscosity. Properties: - Effectively reduces fork-spring vibrations, preventing the vehicle from rocking, ensuring the best possible driving behaviour of the vehicle; - The special additive package and the synthetic base ensure a low coefficient of friction, which facilitates easy and smooth sliding of the fork components and reduces the interference with their mutual movement; - The synthetic base with a high viscosity index ensures a constant cushioning effect over a wide temperature range and in all operating conditions; - Has excellent lubricating and anti-wear properties, which reduce wear and tear on fork components, thus prolonging their service life; - Neutral to seal materials, prevents both swelling and hardening; - Has excellent anti-foam properties; - Highly effective inhibitors provide excellent anti-corrosion properties. Intended for use in classic and inverted forks of road and off-road motorbikes, mopeds, scooters and other motorbike vehicles where these devices are present. Follow the technicals manufacturer’s instructions, especially the oil change intervals! Use the amount of oil specified by the manufacturer of the equipment (and/or fork) in the service manual!

Gasket Maker Black is a sealant that hardens at room temperature. Extremely resistant to high temperatures. Creates a reliable seal that does not crack, shrink or shift under the influence of sudden temperature changes. Replaces o-rings, washers, and asbestos, rubber, felt, paper, cork, and metal seals. It can be effectively used for repair of: valve guide bushings, oil pans, thermostat housings, etc. Resistant to lubricants, coolants, gasoline, kerosene, water, acids and alkalis. Easy to apply and remains flexible. The surface to be treated must be degreased. Operating temperature range: -40 °C to +230 °C (intermittently). Store the sealant in cool and dry conditions in tightly closed original packaging. It retains its strength for at least two years from the date of production.

Gasket Maker Gray is a sealant that hardens at room temperature. Extremely resistant to extreme temperatures. Creates a reliable seal that does not crack, shrink or shift under the influence of sudden temperature changes. Replaces o-rings, washers, and asbestos, rubber, felt, paper, cork, and metal seals. It can be effectively used for repair of: valve guide bushings, oil pans, thermostat housings, etc. Resistant to lubricants, coolants, gasoline, kerosene, water, acids and alkalis. Easy to apply and remains flexible. The surface to be treated must be degreased. Operating temperature range: -40 °C to +230 °C. Store the sealant in cool and dry conditions in tightly closed original packaging. It retains its strength for at least two years from the date of production.

Gasket Maker Transparent is a high - quality one-component sealant that hardens at room temperature. It has excellent adhesive and binding properties. Suitable for bonding and sealing vehicle windshields, headlights, indicators, brake lights, etc. replaces rubber, paper and cork seals. Resistant to lubricants, coolants, water and sun. It is used for working with glass, plastic, ceramics and aluminum. It is easy to apply and remains flexible. After applying to the non-greased surface, it is smoothed and leveled with soapy water.After 24 hours, the connection may be exposed to a load. The operating temperature of this product is -40 °C to +180 °C (short-term). Store the sealant in cool and dry conditions in tightly closed original packaging. It retains its strength for at least two years from the date of production.

Super Glue Gel is designed for instant and extremely strong bonding of all types of plastics, ceramics, china, glass goods, metals, polyvinyl chloride, vinyl, wood, paper, cement, leather, marble, as well as their compounds.

Fully synthetic special purpose white grease for chain lubrication as well as for water equipment, agricultural and garden equipment It is used to lubricate and protect the brake system, battery terminals, door locks and hinges, hoods and boot lids, wiper and window lifters, seat rails and metal levers, ropes, and various other moving parts It distinguishes itself by its resistance to high (up to 260 °C) and low temperatures as well as water, dust and soiling The microceramic elements contained in the composition of the grease ensure reliable lubrication and anti-scuffing properties Thanks to highest adhesiveness it is suitable for highly loaded and fast-moving chains, while the chain transmissions are reliably protected against corrosion This product prevents chain stretching, which extends its working life

It is intended for cleaning hands from strong industrial and household pollution both in auto repair shops and in the household Contains non-hazardous food solvents, surfactants and abrasive powder Has a slightly alkaline pH value of ordinary solid soap (pH 9,5) – not dangerous for the skin of hands Gently and effectively removes the most ingrained dirt and the most persistent dirt, including: oils, resins, bitumen, paints, varnishes, adhesives, sealants, soot, carbon deposits, etc. without having a harmful effect on the hands, without damaging the skin and leaving a pleasant feeling on the skin Hypoallergenic Application: wet your hands with water and apply a small amount of paste, rub thoroughly and rinse with water. Repeat the procedure if necessary

Intake Valve Cleaner-a highly effective tool for cleaning the intake system of gasoline engines up to the intake valves and in the most inaccessible places from all the typical dirt without disassembling the system. In most cases, a single application is sufficient to bring the intake system into perfect condition. As the idling valve (IAC) is operating, deposits gradually accumulate on it, which ultimately affects the circulation of air and gases. This reduces engine power and acceleration, disrupts the smoothness of idling, and significantly increases fuel consumption. Signs of a clogged idle valve may include: - Difficult start-up; - Intermittent idling, as indicated by jumping tachometer readings; - Slow speed reduction when you press the clutch pedal while driving; - Black smoke from the exhaust pipe. Properties: - Quickly, effectively and carefully removes dirt, soot, carbon, resinous and oil deposits and other most difficult to remove and old dirt; - Further protects the intake system elements from corrosion and oxidation, prevents the formation of new dirt and deposits on them, provides functionality and mobility of moving parts, - extending the service life of the intake system and reducing repair costs; - Facilitates cold start, restores the uniformity of idle speed, and reduces fuel consumption; - Contains acetone-aggressive to paint surfaces and plastics; - Safe for catalytic converters, oxygen sensors and turbochargers. Application: shake the balloon well before use. The product must be sprayed behind the air flow meter (the product must not get on it) for at least 30 seconds (depending on the degree of contamination) when the engine is idling (at least 2000 rpm). If there are particularly persistent deposits on the throttle, inside the intake manifold, or on the intake valves, the cleaning procedure can be repeated. After application, allow the engine to run for about 20 seconds at min. 2000 rpm, so that possible residues in the intake system can burn.

Leather Cleaner is a special product with a pleasant smell for effective cleaning and care of leather interiors of cars and their individual elements – seats, steering covers, etc., motorcycle seats, leather furniture and other smooth leather products. Properties: Effectively removes most of the dirt, while strengthening the skin structure due to deep-penetrating active substances; Restores elasticity, prevents deformation, cracking and drying of leather surfaces; Forms a waterproof layer, which, at the same time, does not make the surface slippery and sticky; Does not contain dyes and is suitable for leather products of any color; Ideal for vehicles with heated seats with porous leather surfaces; The composition includes a UV filter that protects the skin from fading in the sun. Application: Shake the can thoroughly before use. Spray on the surface to be treated, then use a clean cloth or sponge to thoroughly wipe the surface in a circular motion, without exerting much effort, spreading the product evenly over it. If desired, after a while, the surface can be polished with 9814 MANNOL Micro Fiber Polish or a clean cloth. Regular use provides optimal care and excellent appearance. Before use, check the product for compatibility with the material on a small invisible area of the surface.

Universal water-resistant lithium grease in the form of an aerosol for lubricating metal, plastic and rubber parts of cars, motorcycles, electrical equipment and other equipment, as well as in the office and at home Effectively protects against moisture, corrosion and wear Does not thicken in the cold, does not drain in the heat. Retains its performance properties from - 30 °C to + 120 °C, which increases the service life of friction units; Due to the use of different metal cations in its composition, it has increased protective properties and reliably protects metal surfaces from corrosion; Reliably protects bearings and other parts from corrosion when operating the equipment in a humid and polluted environment ensuring a long service life; Has good anti-friction properties: effectively reduces friction and wear; Resistant to the action of hot and cold water, absolutely not susceptible to the action of sea water, has water-repellent and sealing properties; Has good adhesion to metals, forms a long-lasting, resistant to water, temperature fluctuations, dirt, lubricating film, which allows you to increase the change interval and reduce the cost of maintenance; Resistant to aging and oxidation. It has good chemical, thermal and mechanical stability. Maintains stability to temperature changes; Eliminates unpleasant creaking and grinding of door hinges, reduces the likelihood of jamming cables, drives, locks, protects non-conductive surfaces of battery terminals from oxidation; Meets a wide range of requirements, allowing the use of a single lubricant in most units; Not applicable for lubrication of electrical contacts! Application: used for servicing personal and commercial vehicles, motor vehicles, electrical equipment and household power tools, agricultural and garden equipment, industrial machinery, etc. for lubrication of threaded connections, rolling and sliding bearings, hinges, all types of gears, hinges, etc. Shake the balloon vigorously for 1-2 minutes before use. Apply a thin layer of grease to the surfaces to be treated. For hard-to-reach areas, use an extension tube.

Lock De-Icer is an ideal car lock defroster that quickly unlocks vehicles in severe frosts. Provides fast defrosting of locks, hinges and other movable joints operated at low temperatures. Properties: - Thanks to its high penetrating power, it quickly defrosts frozen parts of locks, restoring their functionality; - Contains corrosion inhibitors that prevent rust formation; - Forms a film on the surface that has a lubricating effect; - Prevents re-freezing; - Regular use protects the locks from freezing even at low (down to – 50 °C) temperatures.

Montage Cleaner is a special high – performance cleaner for metal car parts, carburetors and others. Suitable for parts made of any metals and alloys Has excellent cleaning properties Applicable to brake pads and discs, clutch and transmission parts, tools, etc. Removes dirt, grease, oil and other petroleum products, brake fluid, residues of burnt and evaporated technical fluids Facilitates disassembly and installation of parts, saves time for disassembly, reduces the effort applied when disassembling and dismantling components and parts during car repairs Suitable for cleaning vehicle bodies, oil filters, motorcycle chains and timing chains, engines, door hinges and electrical contacts, garden equipment (minitractors, motor cultivators, lawn mowers, etc.). Application: Spray the cleaner on the dirty parts and in their joints and let it drain After the solvents have evaporated, the parts remain clean and fat-free Attention: the Product may damage some paints and plastics Before use, check the product for compatibility with them on a small invisible area of the surface

MANNOL Motor Flush Professional is a special cleaner for removing deposits, dirt, sludge and wear products from engine parts, including the most inaccessible parts of the oil system. It contains synthetic esters. Properties: Cleans the oil system and the filter screens of the oil pumps. Provides reliable lubrication during the flushing process, preventing wear of the engine separate parts. Thanks to the detergent-dispersant additives of a unique composition it ensures a highly effective and safe removal of soot, including from the bottom of the pistons; Leaves a strong and persistent antifriction protective film on the surfaces of the engine separate parts after application; Removes both soluble and insoluble impurities found in oil; The cleaning is gentle on all engine separate parts and components, and does not damage them; Neutral to the seals used; Miscible with all types of engine oils (mineral and synthetic etc.) and applicable for flushing of all petrol and diesel engines with and without turbocharging, with and without exhaust gas aftertreatment systems; Is completely removed from the system with the old oil. Add the contents of the container to the used engine oil prior to changing the engine oil at engine operating temperature. After 10 minutes of idling, drain the used oil, replace the filter and pour in new oil (DO NOT DRIVE THE VEHICLE BEFORE FILLING NEW OIL!). The 450 ml can is suitable for 4-6 litres of engine oil.