Pullers and extractors
3-arm gear puller - 4"(101.60mm), spread 110mm, H-110mm
Three-arm puller for removing gears, bearings, pulleys and other parts pressed onto a shaft. The three jaws spread the force evenly, so the part can be pulled off without tilting or damage.Design: 3 armsAvailable sizes: 4" (101.60 mm), opening 110 mm, H 110 mm; 6" (152.40 mm), opening 160 mm, H 140 mm
Automotive pulley puller
This pulley puller will help remove your vehicle's alternator and power steering pump with single or double groove pulleys. The pulley puller is made of forged carbon steel for maximum durability and strength. Adjustable grip tension ensures a good grip when pulling Heavy duty structural pulley puller Pulls pressed single and double groove pulleys May also remove some alternator bearings Drop-forged, machined and heat-treated carbon steel construction Dimensions: 280 x 140 x 60 mm Weight: 1.07 kg
Axle with thread and bearings for pressing bushings/bearings - M12 L=440mm
Ball joint extractor - 40mm
This ball joint extractor is designed for pressing ball joints and tie rod ends out of the tapered seat in the steering knuckle or control arm. It helps separate the joint without hammering, making it useful for suspension and steering repairs.Brand: KingRoyUse: ball joints and tie rod endsAvailable sizes: 18mm, 23mm, 29mm, 46mm
Ball joint extractor set 5pcs.
1 pcs. Ball joint extractor (fork size 17.4 mm) 1 pcs. Ball joint extractor (fork size 23.8 mm) 1 pcs. Ball joint extractor (fork size 28.5 mm) Two exchangeable handles Material forged carbon steel
Ball joint puller
Ball joint puller for separating ball joints and tie rod ends from the steering knuckle or control arm. It presses the tapered pin out of its seat without hammering and without damaging the parts.Application: ball joints, tie rod endsType: joint puller
Ball joint removal/installation tool set 10pcs
This kit consists of a high quality C-frame press, receiver tubes and mounting and removal nozzles C-shaped centering pin for screw press 3 sizes of couplings [diameter x length]: 2-3 / 4 "x 3", 2-1 / 4 "x 2-1 / 2", 1-3 / 4 "x 2" (44/50 mm x 46 mm) , 57/63 mm x 45 mm, 70/76 mm x 60 mm) External mounting adapter [diameter x length]: 2-1 / 4 "x 0.845" (48/52 mm x 21 mm) Internal mounting sleeve 1-3 / 4 "(46/50 x 63 mm) External adapter [diameter x length]: 2-1 / 4 "x 2-1 / 2" (51/57 mm x 63 mm) Mounting nozzle 0,941 '' Removal nozzle 1/2 ''
Ball joint removal/installation tool set 6pcs.
Removes and installs press-fit parts 1 pcs. C-frame press 1 pcs. Installing adapter 1 pcs. Removing adapter 3 pcs. Receiver tubes with inner/outer diameter: 2-3/4" / 3" 2-1/4" / 2-1/2" 1-3/4" / 2"
Ball joint remover 39mm
For European trucks including SCANIA, BENZ, MAN, HINO and other Jaw capacity 39 mm Screw depth 120 mm Nut width 26 mm Heavy duty Forged steel
Ball joint remover 39mm
For European trucks including SCANIA, BENZ, MAN, HINO and other Jaw capacity 39 mm Screw depth 120 mm Nut M24x3.0 (width 26 mm) Heavy duty Forged steel
Ball joint remover adjustable
Jaw capacity 20 mm Maximum opening capacity 30, 50 mm Forged steel body
Ball joint remover adjustable
Jaw capacity 18 -24 mm Maximum opening capacity 50, 80 mm Forged steel body
Ball joint separator - 23mm
Ball joint separator for detaching ball joints and tie rod ends from the steering knuckle or control arm. It helps press the tapered pin out of its seat without damaging parts during suspension and steering repairs.Application: ball joints, tie rod endsAvailable sizes: 23 mm, 34 mm
Ball joint separator 17mm
Ball joint separator, size 17 mm. Designed for separating ball joints and tie rod ends from the steering knuckle or control arm during suspension and steering repairs.Size: 17 mmUse: suspension and steering repair
Ball joint separator 19mm (long)
Drop forged and heat treted alloy steel. Satin finish. Fork size 19 mm L = 400 mm
Ball joint separator 24mm
Drop forged and heat treted alloy steel. Satin finish. Fork size 24 mm L= 300 mm
Ball joint separator 47mm
Capacity 8.8-10.5 t For trucks HINO, ISUZU, UD, FUSO Jaw capacity 47 mm Jaw depth 63 mm
Ball joint separator 62mm
Capacity 15-35 t For trucks HINO, ISUZU, NISSAN, FUSO and buses Jaw capacity 62 mm Jaw depth 75 mm
Ball joint separator adjustable (4 position)
Jaw capacity 20 mm Total length 165 mm Opening capacity 24, 30, 40, 45 mm
Ball joint separator set 5pcs
1 pcs. Pitman arm / tie rod end puller 1 pcs. Ball joint seperator 1 pcs. Pitman arm puller 1 pcs. Ball joint / tie rod end remover 1 pcs. Tie rod / bearing race puller