Pullers and extractors
Gear puller 3 jaw with fixing - Spread 130mm
3 jaws with quick action mechanism for setting and fixing jaws in the right position Material CrMo steel
Heavy duty universal joint puller U-joint
Provides ultimate brute strength for disassembling even the most seized u-joints in minutes on virtually all class 6-8 cars, light-duty trucks and farm machinery. Compatible with Spicer drivelines 1610 / 1710 / 1760 / 1810 / 1880 Series Compatible with Spicer SPL 140 / 170 / 250 Life Series Compatible with Meritor (Rockwell) 16N / 17N / 18N / 1710 Series Compatible with Meritor RPL 20 / 25 Permalube Series. Used with up to a 1″ impact wrench and work with U-Joint bearing cups from 1.5″ to 2.2″ O.D. Provides the most effective mechanical advantage for easy disassembly. Reduces risk of damage to the driveshaft, yokes, joints or bearing caps. Eliminates dangerous vice and socket, or hammering methods. Removes sealed u-joint cups in minutes. Premium grade heavy duty carbon steel with black anodized finish Superior durability and strength Anti-corrosion and anti-rust Anti-impact, anti-deformation Manufactured to OEM specifications High precision and toughness to provide a much longer service life.
Inner bearing puller kit 16pcs
Set includes one slide hammer assemble & 4 clamps Open clamps by turning handle clockwise to snug against the bearing for pulling out evenly without damage the parts 10 pcs. Clamps 8 - 11, 12 - 17, 18 - 23, 24 - 29, 30 - 34, 34 – 38, 39 - 43, 44 - 48, 49 - 53, 54 - 58 mm 3 pcs. Screw M10 x 1.5P, M10 x 1.5P & M8 x 1.25P, M10 x 1.5P & M6 x 1.0P 1 pcs. Slide Hammer 1 pcs. Two Jaw Puller Packing - Plastic box
Inner bearing puller kit 5pcs.
1 pcs. Sliding hammer 0.85 kg, L= 377 mm 4 pcs. Collet: 10-14 mm 15-19 mm 18-25 mm 25-32 mm Video of analog product:
Inner tie rod remover & installer 31.75 - 50.8mm
Practical: the 3/8" Inner Tie Rod Tool turns smooth tie rods easily and removes inner tie rods without removing the outer tie rod Compatibility: fit for all standard tie rods with smooth cylinder ends Work on any rod that fits between the 76.2 mm top and bottom components with both 14.29 mm nuts screwed on and tightened Easy to use: simply slide tool over the end and tighten collar to allow access with a 9.5 mm drive extension Adapters can be used for larger breaker bars/extensions Strong grip: tool teeth grip the tie rod securely as you plug in a socket wrench or breaker bar and turn these smooth tie rod ends Convenient: design with compact/low profile means no bulky tool to store Best tool for servicing inner tie rods to easily remove, repair and install
Insert bearing puller kit 10pcs (L)
Remover with double arms- 1pc Arm extenders - 2 pcs Central thread screw - 1 pc Ball end thread puller adapters (9, 11, 12.5 mm) - 6 pcs
Insert bearing puller kit 13pcs (S)
Remover with double levers - 1pc Lever extenders - 2 pcs Central thread screw - 1 pc Ball end thread puller adapters (5, 6, 8 mm) - 6 pcs Socket - 1 pc
Internal and external puller set with sliding hammer
Internal adapter #1: capacity: 15 to 30 mm Internal adapter #2 capacity: 30 to 80 mm External three leg puller capacity: 15 to 80m m Slide hammer: 1.36 kg, L= 425 mm, thread 5/8" UNF
Mini 2 jaw gear puller - Size 3"(76.20mm), spread 60mm, H-40mm
Mini 2-jaw puller for removing gears, bearings, pulleys and other press-fitted parts from shafts. Its compact size makes it suitable for small parts and tight spaces.Number of jaws: 2Available sizes: 3" (76.20 mm), opening 60 mm, H 40 mm; 4" (101.60 mm), opening 65 mm, H 65 mm
Mini bearing separator set 9pcs
1 pcs. Beam 1 pcs. Separator 15 - 58 mm 2 pcs. Jaw 50 mm 1 pcs. Thrust screw 2 pcs. Extension rod 45 mm 2 pcs. Extension 30 mm
Motorcycle flywheel puller set (10pcs)
Used to separate flywheel from the crankshaft taper Contents: 5 pcs double ended pullers - M28 x M26(1.0mm thread); M25(1.25) x M22(1.0); M27 x M24(1.0mm); M26 x M22(1.5mm); M27(1.25mm) x M20(1.0mm) 2 pcs single ended puller M28 x 1.5mm & M19 x 1.0mm, Threaded bolts – M14 x 1.5mm; M16 x 1.5mm; M18 x 1.5mm
Multi-functional dragging device of water pump stators
Made from high quality steel Used for repairing the water pump Jaw spread 150 mm
Press and pull sleeve kit 27pcs.
5 pcs. Threaded rods (M10, M12, M14, M16, M18) 22 pcs. Press sleeve: 34/44 mm 36/46 mm 38/48 mm 40/50 mm 42/52 mm 44/54 mm 46/56 mm 48/58 mm 50/60 mm 52/62 mm 54/64 mm 56/66 mm 58/68 mm 60/70 mm 62/72 mm 64/74 mm 66/76 mm 68/78 mm 70/80 mm 72/82 mm 75/85 mm 80/90 mm
Pulley extractor and reaction tool
For VW, Audi, Seat, Škoda, Opel/Vauxhall, Ford, BMW, Mercedes, Peugeot, Citroen, Renault, Fiat and most of Japanese vehicles
Sliding hammer/puller CV joint removal set 4pcs
Use this easy-to-use CV joint puller, without spending a lot of effort, and without causing any damage to expensive aluminum transmission cases or other components With 63mm 48mm Joint Fork: Our kit includes opening 63mm and 48mm cv joint fork removing adapter, the CV Joint Fork is threaded internally, and the Slide Hammer stick is threaded externally. the joint fork could fit on the slide hammer stick, 63mm and 48mm fit most vehicle models, have a wide use This kit has everthing you need to remove CV axle or half shaft.
Sliding hammer/puller set 9pcs
2.5 kg Slide hammer with 570 mm shaft Twin leg puller: Internal capacity Ø 35 - 110 mm, reach 82 mm External capacity Ø 50 - 140 mm, reach 75 mm Triple leg puller: Internal capacity Ø 50 - 135 mm, reach 82 mm External capacity Ø 20 - 135 mm, reach 75 mm
Sliding hammer/puller set 9pcs.
2.5 kg Slide hammer with 570 mm shaft Twin leg puller: Internal capacity Ø 35 - 110 mm, reach 82 mm External capacity Ø 50 - 140 mm, reach 75 mm Triple leg puller: Internal capacity Ø 50 - 135 mm, reach 82 mm External capacity Ø 20 - 135 mm, reach 75 mm
Sub-frame bush installer/remover set (15pcs) BMW, Mercedes-Benz
Suitable for the following models: Mercedes-Benz: W220, W211, W203 BMW: E31, E32, E34, E38, E39, E53, E60, E65, E66
Three jaw inner hole bearing puller 2" 12-50mm
Size 2" Jaw spread 12 - 50 mm Video of analog product:
Track rod end remover & installer Ø27 - 42mm
Tool for removing and installing track rod ends (inner tie rod joints) during steering repairs. It makes it easy to unscrew and fit track rod ends without damaging them or the surrounding parts.Range: Ø27–42 mmApplication: removing and installing track rod ends