Car accessories. Car chemistry. Oils. Others
Wing nuts set 150pcs M4 - M10
Wing nuts (M4 x 40, M5 x 40, M6 x 25, M8 x 25, M10 x 20)
Winter Diesel additive 1000ml MANNOL
MANNOL Winter Diesel 1:1000 – a special anti-gel additive developed using a unique technology to reduce the pour point (gelation) and the maximum filterability temperature of both summer and winter diesel fuel grades It is suitable for any type of diesel fuel and all types of diesel engines (atmospheric and turbocharged) with any fuel systems, equipped and not equipped with diesel particulate filters and catalysts It does not change the basic properties of the fuel, only improves its low-temperature characteristics Properties: - Prevents the crystallization of paraffin contained in diesel fuel at low temperatures - Reduces the maximum filterability temperature (down to -36 °C) and solidification temperature (down to -47 °C) of diesel fuel. Optimizes and stabilizes the operation of the fuel system at low temperatures, prevents clogging of filters and fuel lines with paraffin crystals - Increases the completeness of fuel combustion and completely burns itself, without forming carbon deposits and ash residues - Facilitates low-temperature engine start-up - Contains detergents that ensure the cleanliness of the assemblies and fuel system parts - Protects the fuel system from corrosion - Neutralizes water condensate in the fuel tank, preventing the formation of ice jams in the power system at negative ambient temperatures. Application: Shake thoroughly before use. Add to diesel fuel or directly to the fuel tank before each refueling or immediately after it, starting in the fall; in a ratio of 1:1000 (1000 ml of anti-gel per 1000 L of fuel). Self-mixing. Attention! The additive freezes in the cold and shows its full properties only when mixed with diesel fuel. Due to the risk of freezing, the additive must not be stored at temperatures below 0 °C. Under the influence of cold, it becomes solid and does not flow. In this case, it must be heated to room temperature to make it usable again. The additive can only be added to the fuel when it is in the liquid state. Recommended for regular use.
Winter work gloves STEPO ARCTIC
Back of hand: polyester with smooth latex coating Palm: soft foamed latex coating Insulation: thick acrylic fleece lining Standards: EN 21420, EN 388:2016 (2132X), EN 511 (041), CE marking, Category II STEPO ARCTIC knitted winter gloves with double latex coating up to the wrist Good grip on dry and wet surfaces Latex coating helps protect against moisture Thick lining provides protection against cold Extended elastic cuff
Winter work gloves STEPO FROST
Material: acrylic with sandy latex coating for improved grip Cuff: elastic Inner lining: 7G brushed acrylic terry knit Outer shell: 15G nylon and elastane knit Standards: EN 21420:2020, EN 388 (2241X), EN 511:2006 (X20), CE marking Insulated STEPO FROST work gloves designed for work in cold and cool conditions The double-layer knitted construction provides good thermal insulation, comfort and freedom of finger movement The 7G brushed acrylic terry lining adds warmth and softness, while the 15G nylon and elastane outer layer ensures a close and flexible fit Sandy latex coating on the palm and fingers provides reliable grip on various surfaces, including in damp conditions Suitable for construction, warehousing, logistics, agriculture, municipal work and other general applications
Winter work gloves STEPO IGLU
STEPO IGLU knitted winter work gloves, coated with a soft porous latex layer 7G knit gauge provides optimal elasticity, a comfortable fit and good freedom of finger movement Excellent grip on various surfaces The gloves remain highly flexible even at low temperatures Upper material: polyester with acrylic fleece, orange Palm: coated with soft porous latex Standard: EN 21420:2020, EN 388:2016 (2141X), CE marked
Work gloves coated PU-EKO Black - 11 (XXL) Black
Polyurethane coated nylon work gloves STEPO PU-EKO It fits perfectly in the hand, it is comfortable to hold even very small objects Polyurethane evaporates moisture, so hands sweat less Material: nylon coated with polyurethane Color: black Standard: EN388 (4131), CE mark
Work gloves coated PU-EKO White - 11 (XXL) White
Polyurethane coated nylon work gloves STEPO PU-EKO It fits perfectly in the hand, it is comfortable to hold even very small objects Polyurethane evaporates moisture, so hands sweat less Material: nylon coated with polyurethane Color: white Standard: EN388 (4131), CE mark
Work gloves from cuts, nitrile foam coat FORTI
STEPO FORTI cut-resistant work gloves (Level D) Material: high-performance polyethylene (HPPE) / glass fiber, coated with sandy nitrile Cuff: elastic Standard: EN 21420:2020, EN 388:2016 (4243D), CE marked Ultra-thin 18G knitted construction provides excellent comfort and freedom of movement The palm is coated with sandy nitrile, ensuring high performance, precision and reliable grip during tasks requiring excellent fingertip sensitivity Elastic cuff fits securely around the wrist, providing additional protection and comfort Touchscreen compatible: the gloves can be used with touchscreen devices without removing them Breathable construction ensures good air circulation, helping keep hands cool and dry even during intensive work Reinforced thumb area for increased durability Excellent grip: provides reliable grip on dry surfaces, improving work safety and precision
Work gloves from cuts, nitrile foam coat KANEKO - 11 (XXL)
STEPO KANEKO cut-resistant gloves (level B) are manufactured using advanced POK® yarn knitting technology. This technology ensures an extremely thin 18G density textile knitting. The palm of the gloves is covered with an ultra-soft MATTEMORE® NBR nitrile foam coating, which guarantees the highest performance, comfort and precision when performing tasks requiring high finger sensitivity. The advantage of the MATTEMORE® NBR coating is extremely high resistance to abrasion and mechanical wear, and the denser layer effectively prevents moisture and liquid absorption into the base of the glove. The elastic cuff adapts perfectly to the wrist, ensuring comfortable wear. Key features: Improved fit: The thinner coating and ergonomic design provide a firm, enveloping fit, reduce hand fatigue and improve touch sensitivity, allowing you to work comfortably for long periods of time. Comfort with cut protection: POK® technology not only provides a soft feel, but also protection against light cuts when working in environments where there is a risk of cuts Breathability: Designed to ensure optimal airflow, hands remain cool and dry, even when the gloves are worn for long periods. Grip control: Provides excellent grip on both dry and wet surfaces, increasing work safety and accuracy. Touch screen function: Allows you to conveniently operate devices without removing the gloves, ensuring productivity and comfort. These gloves are the ideal choice for industries where a combination of comfort and cut protection is required, such as the automotive industry, metalworking, logistics, construction, plastic handling, glass working. Material: POK® yarn knit lining, meets OEKO-TEX material standard Palm: coated with soft MATTEMORE® NBR nitrile foam layer Standard: EN21420:2020, EN388:2016 (4X42B), CE mark
Work gloves leather-polyester FLEX-TOUCH - 8 (M)
High-quality natural goatskin work gloves STEPO FLEX-TOUCH, combined with cotton, fastened with a sticker Top: strong cotton fabric (with elastic), red color Palm: natural smooth goat skin, solid Cuff: Velcro closure Standard: EN388 (2121), CE mark, category II
Workshop EVA matt 600x600x10mm 6pcs
Foam protective matt for car workshops or tool cabinets. Perfectly protects all types of floors against mechanical damage. The mat also reduces noise level inside the room. It is distinguished by two surfaces - smooth and textured. The set includes six matts with dimensions of 600x600mm and a thickness of 10mm. Each mat has two edge finishes, which allows for free arrangement surface. The mats are made of resistant EVA foam. They fit together like a puzzle, you can cover any large surface. Perfect surface for workshops, gyms and sports halls.