Product catalog
Magnetic tray 92x64mm
Length 64 mm Width 92 mm Depth 26 mm Thickness 0.5 mm Magnet ⌀ 40 mm Material stainless steel
Magnetic tray set (2pcs) Ø108/150mm
Set of two magnetic trays for holding screws, nuts, washers and other small metal parts during repair work. The magnet keeps the parts in place so they do not get lost or spill.Brand: YATOQuantity in set: 2 pcsDiameter: Ø108 mm and Ø150 mm
Magnetic tray socket holder Metric set (3pcs)
The case fits standard and extended heads METRIC sizes available: 4mm to 14mm (1/4" Dr.) 6mm to 20mm (3/8" Dr.) 10mm to 27mm (1/2" Dr.)
Magnetic welding holder - 3" 83x119x14mm
Applicable angle: 45°,90°,135° Pull Force 50 Lbs Material A3 steel Surface treatment powder coated
Magnetic welding holder 111x136x24mm
Load capacity 34 kg Angles 30°, 45°, 60°, 75°, 90°, 135° Dimensions 111 x 136 x 24 mm
Magnetic welding holder set (2pcs) 98x113mm, L type
Made of steel sheet and strong magnets Powder coated surface Designed for temporary joining of metal elements during welding, drilling and painting Holding force: 10 kg use at an angle of 60 °, 90 ° and 120 ° Dimensions: 98 x 113 mm
Magnetic welding holder set (4pcs)(45°-90°-135°)
Made of steel sheet and strong ferrite magnets Powder coated surface Designed for temporary joining of metal elements during welding, drilling and painting Holding force: 4.5 kg use at an angle of 45 °, 90 ° and 135 ° Dimensions: 43 x 72 x 12 mm
Magnetic welding holder set (6pcs)(45°-90°-135°)
Made of steel sheet and strong ferrite magnets Powder coated surface Designed for temporary joining of metal elements during welding, drilling and painting Holding force 4.5 kg Use at an angle of 45 °, 90 ° and 135 ° Dimensions 43 x 72 x 12 mm 2 pieces of large angles: Holding force: 11.5 kg Dimensions 82 x 118 x 14 mm
Magnetic wrist band
Length 340 mm Width 90 mm Number of pockets 2 pcs. Number of magnets 5 pcs. Made of wear-resistant technical nylon Finished with a strong Velcro closure Additionally fixed on a rubber strap The band is designed for temporary fastening of small metal elements such as screws, nuts, nails, springs, bits and similar details Using the band greatly reduces the time needed to perform some assembly work Non-magnetic trinkets can be placed in special pockets
Magnetizer / demagnetizer
Magnetizer and demagnetizer for the tips of screwdrivers, bits and other steel tools. A magnetized tip holds screws and makes work easier, while demagnetizing helps when magnetism gets in the way, for example when working on electronics.Brand: CHANGLU TOOLSFunctions: magnetizing, demagnetizing
MANNOL Air Filter Oil 200ml
MANNOL 9964 air filter lubricant/impregnator 200ml is intended for zero resistance air filters. The product has water repellency and dust retention properties. When operating a motorcycle in difficult conditions (off-road driving, high revs, dusty conditions), it is advisable to use the product every 5000 km, when operating in normal conditions every 10000 km. Properties: - Provides maximum air supply, increasing engine power; - Reliably holds dust, dirt and sand in the most extreme conditions. Reduces wear and extends the oil change interval. Eliminates engine damage caused by contamination, extends its life and reduces maintenance and repair costs; - Provides excellent adhesive properties of the filter, so that it effectively detains even the smallest dust particles, while it is securely held on the surface of the filter elements; - Recommended for use in Motorsport; - Colors the filter in tints from pale pink to red, and the color may appear immediately or after a while; - Completely eliminates the risk of destruction of HIGH-FLOW filters during operation. Application: Remove the filter. Clean the filter surface from coarse dust and dirt particles by tapping and then using a soft-pile brush. Apply MANNOL Universal Cleaner 9972 on both sides of the filter. Let it soak in. After 10 minutes, rinse the filter in a container of water, then under a low stream of water. Dry the filter well. Shake the container and spray 9964 MANNOL Air Filter Oil on the filter from a distance of 20-30 cm. Mash the filter to achieve the best penetration of the impregnation into the filter. Let it dry for 15 minutes.
MANNOL Air-con fresh 200ml
Air-Con Fresh is a prophylactic agent for deodorisation in vehicle air conditioners, ventilation ducts or vehicle air ducts without removing the cabin filter It effectively and quickly removes unpleasant smells, bacteria, fungi and prevents them from re-forming It leaves a fresh and pleasant aroma This product prevents allergic diseases In order to dry the evaporator surface run the engine and set the following heating and ventilation conditions for 10 minutes: air conditioner OFF, recirculation ON, air distribution set to the footwell, set temperature and fan speed to max. Shake the can well before use. Place the Air-Con Fresh in the intake area of the air circulation system (mostly passanger footwell) and switch air distribution to windshield. Then press the sprayhead until it locks. Keep windows and doors closed for 10 minutes. Dry the evaporator at the same settings as described above. Switch off the engine and ventilate the interior for 10 minutes. Use disinfectants safely. Always read the label and product information before use.
MANNOL body polishig paste set
Schleifpaste Profi Set is a set of professional diatomite abrasive pastes for manual and MECHANICAL polishing of paint coatings. Pastes differ in the grain size of the abrasives. MANNOL Schleifpaste No. 1 removes deep scratches, damaged, oxidized or dull top layers of paint due to the large abrasive grains contained in it. It allows you to easily remove smudges and stains of lacquers and paints during the restoration of the body, as well as adjust the color shades during partial painting. MANNOL Schleifpaste No. 2 removes small scratches, minor defects in paint coatings and solidified residues of petroleum products due to the micro abrasive components contained. It easily removes excess varnish after painting the body, facilitates deep cleaning of the surface, removes rust and aggressive substances from the micro cracks of the paintwork and individual chrome parts. Sizes of abrasive particles: MANNOL Schleif Paste No. 1 – 75 microns, MANNOL Schleif Paste No. 2 – 3 microns. Application: Clean the surfaces to be treated. RUB MANNOL Schleif paste No. 1 on small areas with a cloth or sponge, with the necessary pressure, Until the damaged and oxidized layers of the previous coating, rust, oxides, dirt and scratches are removed. For a mirror-like finish, apply MANNOL Schleif Paste No. 2 liberally to the surface using the supplied wet cloth and Polish it, then rinse it off.
MANNOL Brake Cleaner 20l
Brake cleaner / Metal Parts Cleaner / Degreaser A solvent blend for cleaning and degreasing metal parts. Designed for effective cleaning of brake drums, discs, pads, cylinders and clutch parts. Quickly and effectively removes dirt, dust, grease and brake fluid. Dries quickly and leaves no residue. Features and Benefits: Removes brake fluid, oil, tar, grease and other contaminants Cleans without stripping Eliminates brake squeal and clutch slippage caused by dirt or burn-in Dries quickly and leaves no residue How to use: Spray, brush or dip. Follow safety precautions for flammable liquids. Allow to absorb, then wipe off with a dry cloth. Storage: Store below 50°C. Avoid direct sunlight.
MANNOL Brake Cleaner 450ml
MANNOL Brake Cleaner is a special cleaner for all separate parts in the motor vehicle breaking system. It has excellent cleaning properties and is applicable to brake shoes and discs. It removes soiling, oil, grease, brake fluid, other petrochemicals and burnt technical fluids.
MANNOL Brake Fluid DOT-4 1l
Synthetic brake fluid based on polyglycols and esters, containing corrosion and oxidation inhibitors Designed for hydraulic systems of all traditional brake devices and clutches Product properties: Contains boric acid, which completely neutralizes water condensate Provides reliable operation of the brake system at any ambient temperature due to the increased boiling point (>245 °C) and excellent low-temperature properties (up to -40 °C) Has the highest chemical and thermal stability Offers excellent lubricity and viscosity-temperature properties Neutralizes the formation of vapour bubbles Compatible with elastomers Entirely inactive for the parts of the brake system Aggressive to paintwork Color: colorless / light brown Recommendation: SAE J1703/J1704 ISO 4925 FMVSS 116 DOT 4 JIS JAPAN K2233
MANNOL Carburetor Cleaner 400ml
Carburetor cleaner is an effective cleaning agent for the carburetor without removing it It removes high-temperature deposits from the inner and outer surface of the carburetor It completely optimises the function of the fuel system This product is applicable to two- and four-stroke petrol engines with and without catalyst
MANNOL Carburetor Cleaner 600ml
Carburetor cleaner is an effective cleaning agent for the carburetor without removing it It removes high-temperature deposits from the inner and outer surface of the carburetor It completely optimises the function of the fuel system This product is applicable to two- and four-stroke petrol engines with and without catalyst
MANNOL Chain cleaner 400ml
MANNOL Chain Cleaner is a special agent for quick and easy cleaning of chains and separate parts in motorcycles This product has a good penetrating ability and excellent dissolving properties. It facilitates removing tar deposits and tar oil as well as petrolic and grease soling
MANNOL Cleaning hand gel 5kg
It is intended for cleaning hands from strong industrial and household pollution both in auto repair shops and in the household Contains non-hazardous food solvents, surfactants and abrasive powder Has a slightly alkaline pH value of ordinary solid soap (pH 9,5) – not dangerous for the skin of hands Gently and effectively removes the most ingrained dirt and the most persistent dirt, including: oils, resins, bitumen, paints, varnishes, adhesives, sealants, soot, carbon deposits, etc. without having a harmful effect on the hands, without damaging the skin and leaving a pleasant feeling on the skin Hypoallergenic Application: wet your hands with water and apply a small amount of paste, rub thoroughly and rinse with water. Repeat the procedure if necessary
MANNOL Cockpit care NEW CAR 250ml
Cockpit Care is a preservative-protector of plastic with a pleasant smell, which serves as its cleaner and at the same time as a protective varnish. Compatible with all plastics used in cars. Properties: - Protects surfaces from cracking, drying and fading; - Gives the treated surface an initial shine and has an antistatic effect that prevents the accumulation of dust; - Recommended for external and internal treatment of plastic parts, as well as rubber and vinyl surfaces. Application: Clean the surface to be treated before use. Shake the can well before use. Do not spray directly on plastic surfaces. Instead, apply to a dry sponge or cloth and wipe the surface thoroughly. Avoid applying to glass or fabric surfaces. Do not use on the steering wheel, pedals, or door handles.
MANNOL Cockpit-reiniger 650ml NEW CAR
Cockpit-Reiniger is a dashboard cleaner with a pleasant smell, designed to remove dirt and to protect from cracking and drying out. Properties: Has excellent cleaning properties; Forms a strong polymer layer of silicone molecules on the treated surface which is resistant to UV radiation and gives the surface excellent waterproof and antistatic properties; Can be used for the care of internal coatings made of synthetic material and plastic. Application: Clean the surface to be treated before use. Shake the balloon well before use. Do not spray directly on plastic surfaces – instead, apply the cleaner to a dry sponge or cloth and wipe the surface thoroughly. Avoid contact with glass or fabric surfaces. Do not use on the steering wheel, pedals or door handles.
MANNOL Cockpit-reiniger foam 220ml
Cockpit-Reiniger is a dashboard cleaner with a pleasant smell, designed to remove dirt and to protect from cracking and drying out. Properties: Has excellent cleaning properties; Forms a strong polymer layer of silicone molecules on the treated surface which is resistant to UV radiation and gives the surface excellent waterproof and antistatic properties; Can be used for the care of internal coatings made of synthetic material and plastic. Application: Clean the surface to be treated before use. Shake the balloon well before use. Do not spray directly on plastic surfaces – instead, apply the cleaner to a dry sponge or cloth and wipe the surface thoroughly. Avoid contact with glass or fabric surfaces. Do not use on the steering wheel, pedals or door handles.