Product catalog
Machine taps P6M5 DIN374 - M16x1.25
Machine taps for cutting metric threads, including fine-pitch threads. Suitable for use in drilling and tapping machines, as well as with a hand tap wrench.Steel grade: P6M5Standard: DIN 374Available sizes: M8x1.0; M10x1.0; M10x1.25; M12x1.0; M12x1.25; M12x1.5; M14x1.25; M14x1.5; M16x1.5; M18x1.5; M18x2.0; M20x1.5; M20x2.0; M22x1.5; M24x1.5; M24x2.0
Machine taps P6M5 DIN376 - M18x2.5
Machine taps designed for cutting metric internal threads on drilling machines, tapping machines and other machine tools. They are made of P6M5 high-speed steel to DIN 376.Material: P6M5 (high-speed steel)Standard: DIN 376Thread: metricAvailable sizes: M4x0.7, M5x0.8, M6x1.0, M7x1.0, M8x1.25, M9x1.25, M10x1.5, M11x1.5, M12x1.75, M14x2.0, M16x2.0, M18x2.5, M20x2.5, M22x2.5, M24x3.0, M27x3.0, M30x3.5
MacPherson multi strut coil clamp spring compressor
Don't used with impact wrenches! Capacity 3196 Lbs, 1450 kg Compresses springs Ø 100 - 250 mm Heavy-duty, lightweight unit made from steel alloy Max load 14200 N Break point 56000 N
MacPherson strut spring hook compressor 2pcs.
Jaw opening 250 mm With locking Use with 1/2" ratchet or wrench
Magnetic Camber gauge
Universal automotive tool for wheel alignment, caster camber gauge compatible with a lot of vehicles This Wheel Alignment Balancing Tools allows you to return the strut to the original camber position after dismantling and re-assembling the suspension or to check the amount of camber change before re-installing. The alignment gauge is suitable for accurate checking of the castor and camber angle. Measures the camber and caster angle on the wheel hub or brake disc. Also, this magnetic camber alignment gauge could be used as a normal gradienter. With it's strong magnetic attraction, the camber alignment tool can easily attached on all kind metal surfaces. Alignment tools automotive: Easy to read through accurate scale with range of measurement from -5 up to +5 degrees. You can ask seller for sending User Manual. Make magnetic gauge tool for camber castor strut wheel alignment easier.
Magnetic Camber/Castor/Kingpin gauge
Robust, magnetic gauge mounts onto hub for quick and accurate measurement of camber, castor angles and kingpin inclination. Two large adjuster knobs, one for conveniently zeroing bubble during angle measurement, and one for adjusting kingpin inclination. Camber gauge with fixed graduation from -5° to +5°. Adjustable castor gauge graduated from -3° to +11°. Kingpin gauge graduated from 0° to 14° left to right. Magnetic plate Diameter: Ø85mm. Supplied in storage case. Nett Weight: 1.68kg
Magnetic drill press Ø28mm 1200W
Voltage 220-240 V, 50/60 Hz Power 12000 W Motor speed 320 rpm (with load) Holder Morze cone MT3/2 / MK3/2 Max drilling Ø 28 mm (1-1/8") Min. workpiece thickness 6 mm (1/4") Stroke 170 mm (6-3/4") Magnetic clamping force 1275 KG (12500 N) / 25mm, Ra = 1.25 / Magnetic base dimensions 210 x 120 x 65 mm Included: magnetic drilling machine, chuck wedge, fastening strap, wooden box Overall dimensions 405 x 195 x 440 mm Noise level ~ 85 dB Protection grade IP 20 Electrical insulation class I Operating temperature 0-40 ° C (32 - 104 F) Weight 22.5 kg CE conformity 12 months warranty
Magnetic drill-cutter press 1600W
Voltage 220-240 V, 50/60 Hz Power 1600 W Motor speed 350 rpm (with load) Holder 19 mm (3/4 ") Weldon and Morse cone MT3/2 / MK3/2 Max milling Ø 36 mm (1-7/16") Max drilling Ø 28 mm (1-3/32") Max countersinking Ø 40 mm (1-9/16") Max cutting depth 50 mm (1-31/32") Min. workpiece thickness 6 mm (1/4") Stroke 180 mm (7-3/32") Magnetic clamping force 1325 KG (13000 N) / 25mm, Ra = 1.25 / Magnetic base dimensions 210 x 120 x 65 mm Included: magnetic drilling/cutting machine, 4 mm hex key, chuck wedge, fastening strap, fluid holder, wooden box Overall dimensions 405 x 215 x 490 mm Noise level ~ 85 dB Protection grade IP 20 Electrical insulation class I Operating temperature 0-40 ° C (32 - 104 F) Weight 27 kg CE conformity 12 months warranty
Magnetic ground clamp 500A 7kg
Material: steel sheet | ferrite magnet Application: non-invasive and quick assembly of the mass point for the welded material Diameter: 85 mm Welding current: 500A Lifting capacity: 7 kg Handle length: 160 mm Welding ground clamp. Magnet force 7 kg, transfers current up to 500A The tool enables almost non-invasive and quick installation of the ground point for the welded material. Apply the clamp from the magnet side to the welded material and grab the ground clamp from the welding machine by the protruding clamp screw.
Magnetic holder for paper towels
For use on side of tool box or service cars Set of two holders for a roll of paper Cushioned magnet resists surface scratching Heavy gauge 0,8 mm black powder coated steel construction It holds up to 650 g
Magnetic holder for screwdrivers 350mm
ABS material Dimensions 350 x 50 x 40 mm 9 pockets Equipped with two strong magnets on back Max. load 2.7 kg
Magnetic holder for tools 350mm YT-08354
ABS material Dimensions 350 x 50 x 40 mm 9 pockets Equipped with two strong magnets on back Max. load 2.7 kg
Magnetic hooks set 10pcs
Magnetic hook set for hanging tools, cables, lamps and other items on metal surfaces. The hooks help keep the workshop organised and keep things within reach without drilling or screwing.Brand: YATOQuantity: 10 pcsApplication: hanging on metal surfaces
Magnetic parts tray Ø150mm
Magnetic parts tray for keeping bolts, nuts, washers and other small metal parts together while you work. The magnet holds parts in place so they do not spill or get lost when working on a vehicle or machine.Brand: YATODiameter: Ø150 mm
Magnetic pick-up tool 380mm
Magnetic pick-up tool for retrieving dropped screws, nuts, washers and other metal parts from hard-to-reach places such as the engine bay or narrow recesses. It saves time and avoids having to dismantle assemblies just to reach a dropped part.Brand: SATALength: 380 mmType: magnetic pick-up tool
Magnetic pick-up tool with led light
Extended length 800 mm Closed lenght 190 mm Stainless steel shaft with pocket clip LED light
Magnetic stand for dial indicator
Professional magnetic stand YT-72460 for dial gauges YT-72450 and YT-72453 It has an elastic joint for precise positioning of the dial gauge on the measured element Central locking of the center and top joint with a knob Magnetic base with a prismatic groove on the bottom The high pulling force ensures a stable and secure connection with metal elements - the element is unfastened with a special knob
Magnetic starter.Spare part - 11A, 5.5kW
Magnetic starter – a compressor spare part used to switch the compressor's electric motor on and off. Choose the version matching the motor power and current to replace a faulty or worn starter.Brand: MZBPart type: compressor spare partAvailable versions: 7 A, 3 kW; 9 A, 4 kW; 11 A, 5.5 kW; 15 A, 7.5 kW
Magnetic support stand for MIG welding torch
Made of 2.5 mm thick steel with a solid and powerful ferrite magnet at the base Powder coated surface Total height 137 mm Maximum width 95 mm Magnetic block diameter 86 mm Weight 0.74 kg
Magnetic support stand for TIG welding torch
Made of 2.5 mm thick steel with a solid and powerful ferrite magnet at the base Powder coated surface Total height 154 mm Maximum width 80 mm Magnetic block diameter 86 mm Weight 0.74 kg
Magnetic tray 237x135mm
Length 237 mm Width 135 mm Depth 26 mm Magnet ⌀ 80 x 12 mm Material stainless steel
