Product catalog
Jacking pad set 4pcs for Tesla
The jack pad is specially designed for Tesla Model 3/S/X/Y. The jack pad adapter provides perfect protection for the car and prevent damage to the side skirts and chassis. Insert the floor jack pad into the center of the jack point hole on the vehicle and position the jack directly beneath it.
Japanese putty plastic set 4pcs
Plastic Japanese spatulas, are used for precise distribution of glue, mortar, putty, resin, etc. Made of resistant and flexible plastic. For smooth surfaces in a set of 4 pieces with widths: 50, 75, 100, 120 mm Ideal for body shop work, such as applying putty.
Key drill chuck 1/2" 1.5-13mm
Keyed drill chuck for clamping drill bits and other round-shank tools. Suitable for replacing a drill's chuck or for use with tools that have a 1/2" mount. The key provides a firm grip on the bit.Mount: 1/2"Clamping range: 1.5–13 mmType: keyed
Key HEX, INCH, TORX set 26pcs
9 pcs. HEX key 1.5, 2, 2.5, 3, 4, 4.5, 5, 5.5, 6 mm 8 pcs. TORX key T9, T10, T15, T20, T25, T27, T30, T40 9 pcs. INCH key 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4
Keyboard for PL-1150. Spare part
Control keyboard – a spare part for the PULI PL-1150 wheel service machine. Intended to replace a damaged or worn keyboard, restoring convenient operation and data entry without replacing the whole control unit.Brand: PULICompatible with: PL-1150Part type: spare part
Keyboard for PL-1152/PL-1820 (spare part)
Keyboard supplied as a spare part for PULI wheel service equipment PL-1152 and PL-1820. It is intended to replace a damaged or worn keyboard, restoring convenient control of the machine and entry of settings.Brand: PULICompatibility: PL-1152, PL-1820Type: spare part
Keyboard for PL-1897WR. Spare part
Replacement keyboard (control panel) for the PULI PL-1897WR wheel service machine. It replaces a worn or damaged keyboard, restoring control of the machine and entry of settings. Please check that your machine model matches before ordering.Brand: PULICompatibility: PL-1897WRType: spare part
Keyless chuck 1/4" 0.5-3mm
Keyless (quick-action) chuck for clamping small drill bits and other round-shank tools. The chuck can be opened and closed by hand without a key, speeding up bit changes.Brand: YATOMount: 1/4"Clamping range: 0.5–3 mmType: keyless
Keyless drill chuck 1/4" Ø0.5-6.5mm
Keyless drill chuck that lets you clamp and change drill bits and other accessories quickly by hand, without a chuck key. Suitable for small-diameter bits in drills and drill drivers.Brand: YATOMounting: 1/4"Clamping range: Ø0.5–6.5 mm
Keys for adjusting carburetors 8 pcs + brushes
Carburetor adjustment keys are made of high quality stainless steel They are attached to a comfortable handle The composition of the set: 8 keys and nozzle cleaning brushes Single D 2x Hexagon Spline 2x Double D Pac Man 2x
Keys for pins removal kit 18pcs
Their handle is covered with rubber, which increases the comfort of work Such a set is an indispensable equipment of every electrician / electronics It is extremely useful when modifying and repairing electrical installations in a car, motorcycle, boat, and at home when repairing household appliances, rtv and computers The extractors are ergonomically shaped, which makes the disassembly very easy You can also work on a broken pin or a bent connector plate And most importantly - the removers do not damage the pins
Knife brush with plastic handle
Brush head L= 140 mm Overall L= 265 mm Brass coated steel wire Ø 0.30 mm 12 pcs./box
Knife sharpener (triple type)
Sharpener with three types of different hardness designed for effective sharpening of knives and other similar tools. The body is made of a damage-resistant material, which also functions as a water reservoir. Abrasive wheels work "wet" increasing the efficiency of sharpening. The sharpening discs are made of ceramic material, chromium corundum and aluminum oxide, depending on the intended use. This guarantees optimal pre-sharpening and fine-sharpening results. Properly selected angles of the discs, blade guiding slots and the use of water ensure effective, precise sharpening. For preliminary and fine knife sharpening. Open the blade guard, fill the container with water, close the guard, place the blade in the appropriate guide slot. Move with smooth movements, pressing lightly.
L-Handle Hex key extra long colored ball point set 9pcs (1.5-10mm)
Size 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm DIN 5264
L-Handle Hex key extra long colored ball point set 9pcs (1.5-10mm)
Sizes 1,5, 2, 2,5, 3, 4, 5, 6, 8, 10 mm Color-coded sleeves with high-contrast size markings provides quick and easy size identification and hand comfort Black finishing treatment for better corrosion protection Ball point keys allow for angled access to fasteners Housed in impact-resistant case
L-type connector F. Internal thread 1/2" x M. External thread 1/2"
L-type (elbow) connector with a 1/2" female and a 1/2" male thread. Designed for pneumatic lines and compressed air systems where a 90° turn is needed, for example when fitting quick couplers or hose tails.Brand: OMG GHIOTTOShape: L-typeThreads: 1/2" female x 1/2" male
L-type connector F. Internal thread 1/4" x M. External thread 1/4"
L-type (elbow) connector for pneumatic systems with 1/4" internal and external threads. Used to change the direction of a compressed air line, making it easier to connect quick couplers, hoses or tools in tight spaces.Brand: OMG GHIOTTOThreads: 1/4" internal x 1/4" externalShape: L-type
L-type connector F. Internal thread 1/8" x M. External thread 1/8"
L-type (elbow) connector with a 1/8" internal thread at one end and a 1/8" external thread at the other. Used to route pneumatic lines at an angle and to connect components in compressor and compressed air systems.Brand: OMG GHIOTTOThreads: internal 1/8" (F) x external 1/8" (M)Shape: L-type
L-type connector F. Internal thread 3/8" x M. External thread 3/8"
L-type elbow connector with a 3/8" female and a 3/8" male thread for compressed air systems. It allows an angled connection, for example when fitting quick couplers, hoses or air tools in tight spaces.Brand: OMG GHIOTTOType: L-typeThreads: 3/8" female (F) x 3/8" male (M)
L-type connector M. External thread 1/2" x 1/2"
An L-type (elbow) connector with external thread for compressed air systems. It is used to create an angled turn in an air line, for example when connecting quick couplers, hose tails or other fittings.Brand: OMG GHIOTTOShape: L-typeThread: external (M), 1/2" x 1/2"
L-type connector M. External thread 1/4" x 1/4"
L-type elbow connector with 1/4" male threads on both ends for compressed air systems. It allows an angled connection, for example when fitting quick couplers, hoses or air tools in tight spaces.Brand: OMG GHIOTTOType: L-typeThreads: 1/4" male (M) x 1/4" male (M)
L-type connector M. External thread 1/8" x 1/8"
L-type (elbow) connector with two 1/8" male threads. Designed for pneumatic lines and compressed air systems where a 90° turn is needed, for example at machines, tools or distribution points.Brand: OMG GHIOTTOShape: L-typeThreads: 1/8" male x 1/8" male
L-type connector M. External thread 3/8" x 3/8"
L-type (angle) connector with male threads on both ends, used to connect air lines, quick couplers and tools at an angle. It helps route hoses more conveniently and reduces kinking at the connection point.Brand: OMG GHIOTTOThread: male 3/8" x male 3/8" (M x M)Application: pneumatic systems
L-type extended handle with sockets 1/2" set 3pcs.
1 pcs. 1/2" Offset handle, L = 345 mm 1 pcs. 1/2" Dual head socket 17 x 19 mm 1 pcs. 1/2" Dual head socket 21 x 23 mm