Product catalog
IN & OUT Fluid syringe 350cc (transparent)
For suitable various fluids (anti-freeze, brake), power steering and limited slip differential oil Capacity 350 ml 1 pcs. Rubber hose, Ø 9.8 mm, L= 300 mm Do not use it for gasoline or any corrosive liquids!
IN & OUT Fluid syringe 500cc (transparent)
For suitable various fluids (anti-freeze, brake), power steering and limited slip differential oil Capacity 500 ml 1 pcs. Rubber hose, Ø 9.8 mm, L= 300 mm 1 pcs. Plastic hose, Ø 9.8 mm, L= 300 mm Do not use it for gasoline or any corrosive liquids!
IN & OUT Fluid syringe 500cc (transparent)
For suitable various fluids (anti-freeze, brake), power steering and limited slip differential oil Capacity 500 ml 1 pcs. Rubber hose, Ø 9.8 mm, L= 300 mm 1 pcs. Plastic hose, Ø 9.8 mm, L= 300 mm Do not use it for gasoline or any corrosive liquids!
Inclinable machine clamp 100mm
Jaw width 100 mm Jaw height 46 mm Max opening 95 mm Weight 16.0 kg
Indexing pry bar set (2pcs)
Expandable and adjustable 200 mm (8-inch) and 400 mm (16-inch) Increased productivity: Head rotates 180° through 14 locking positions for improved leverage and to access areas a fixed head tool can't reach Durable: Alloy steel construction is corrosion resistant and withstands everyday wear and tear for lasting durability Quick release: Push-button lets you quickly extend the tool’s reach or collapse the tool to easily store in your toolbox Ease of use: Grooved head profile grips and holds securely in tight confines and at the fullest extension, so you can complete tasks with ease
Indicator 0-10mm
The professional dial indicator is widely used in workshop work and machine control Perfect for handling and checking the correct installation of brake discs and all kinds of pulleys or shafts Pitch 0.01 mm Measuring range 0 - 10 mm Mounting pin Φ 8 mm Clock face diameter ~ Φ 55 mm Sensor with rear mount - Φ 6 mm
Induction coil (side) white - 19/220mm M8
Side-mounted induction coils for DAWELL induction heaters Application: for loosening bearings, screws, gears, glued and corroded joints, etc. Easy exchange for fast and comfortable work
Induction heater 1.5kW
Applicable in automotive, railway and shipbuilding industry, metalworking and maintenance It finds application in operations that require speed and flexibility and pose a risk of damage around heated parts with naked flame (upholstery, pain, rubber sleeves, electrical installation, etc.). Facilitates removal of rusty bolts and old parts, heating of exhaust pipelines, bolts, nuts, bearings, tools before hardening, gluing, soldering, and ideal for defrosting It replaces heating by oxyacetylene and butane-propane flame Voltage 220V, 50Hz Power supply cable 1.5 m Coil gun holder 0.8 m Power 1.5 kW / 3.2 kVA Consumption 8 A Do not exceed the operating cycle DIH-1.5kW – 2 minutes heating (on) a 2 minutes cooling (off) Ingress Protection Code IP20 Operating frequency 25 - 65 kHz, automatic adjustment Equipment of protection class I Protection against overheating and overload of the source and short circuit of the coil Flame- and spark-free heating Fan cooling Output short circuit protection PF (power factor) 0.99 (PFC) Continuous heater / loader 100 % IGBT transistors Coil circuit break protection Dimensions 210 x 140 x 90 mm Weight 4.6 kg 12 month warranty Extension cords – if necessary, you may use only the following extension cords: up to 5 m with 2.5 mm2 diameter up to 15 m with 4 mm2 diameter When using the device with an alternate source of power – e.g. with mobile electric generator, it is necessary to use a quality alternate source of sufficient power and AVR quality control Use a generator with a power output of at least 3-4 kW, or DC / AC inverter with a power output of 2-3 kW and only with a sine wave – do not use the inverter with a square or quasi-sine wave Failure to comply with the above requirements may result in damage to the device and void the warranty
Induction heater 1.5kW with coil set
Johny 16.00 Applicable in automotive, railway and shipbuilding industry, metalworking and maintenance It finds application in operations that require speed and flexibility and pose a risk of damage around heated parts with naked flame (upholstery, pain, rubber sleeves, electrical installation, etc.). Facilitates removal of rusty bolts and old parts, heating of exhaust pipelines, bolts, nuts, bearings, tools before hardening, gluing, soldering, and ideal for defrosting It replaces heating by oxyacetylene and butane-propane flame Voltage 220V, 50Hz Power supply cable 3 m Coil gun holder 0.7 m Power 1.5 kW / 3.2 kVA Consumption 8 A Do not exceed the operating cycle DHI-15 – 2 minutes heating (on) a 2 minutes cooling (off) Ingress Protection Code IP20 Operating frequency 25 - 60 kHz, automatic adjustment Equipment of protection class I LED illumination in front of the induction coil Protection against overheating and overload of the source and short circuit of the coil Flame- and spark-free heating Fan cooling Output short circuit protection PF (power factor) 0.99 (PFC) Continuous heater / loader 100 % IGBT transistors Coil circuit break protection Dimensions 200 x 140 x 75 mm Set includes 4 pcs heating coils (1 pcs flexible, 1pc flat, and 2 pcs fixed coils 19 mm (M8), 26 mm (M12) Weight 4.5 kg 12 month warranty Extension cords – if necessary, you may use only the following extension cords: up to 5 m with 2.5 mm2 diameter up to 15 m with 4 mm2 diameter When using the device with an alternate source of power – e.g. with mobile electric generator, it is necessary to use a quality alternate source of sufficient power and AVR quality control Use a generator with a power output of at least 3-4 kW, or DC / AC inverter with a power output of 2-3 kW and only with a sine wave – do not use the inverter with a square or quasi-sine wave Failure to comply with the above requirements may result in damage to the device and void the warranty
Induction heater 3.7kW with water cooling
The DHI-44E LKW INDUCTION HEATER is a portable water-cooled induction heater with a two-meter induction burner and optional replaceable focus coil extenders The device is designed for heating ferromagnetic and conductive materials Its compact and lightweight design, high power output and ease of use make it ideal for workshops, car repair shops, maintenance shops and the repair industry in general A significant advantage of the DHI-44 LKW compared to other heating methods is its safety, simplicity and high speed of heating and application, particularly compared to flame heating Higher security and better working conditions for operators The operator is not exposed to open flame, hot gases and the risk of fire and explosion when using a flame There is no need for regular staff to work on autogenous and PB burners Low operating costs and low cost of consumables, low power consumption, energy-efficient heating system Use: Automotive, railway and shipbuilding industry, production, mechanical, servicing workshops, repair shops, assembly plants, heating and plumbing, home workshops, etc. Production, repair, renovation, maintenance Workshops requiring heating of bolts, round steel, sections, sheets, bearings, bushes, drive shafts, hinges, nuts, pipes, cogwheels, bearing mountings, shafts, lambda probes, parts and components of machines and cars, exhaust systems, belt pulleys, sleeves, etc. Heating tools and parts for hardening, gluing, soldering Defrosting Same applications as gas and oxy acetylene burners Supported functions: Dawell Heating Control System 3; Boost Induction Power Technology; Dynamic Induction Power Adjust; Quiet Cooling Technology; Automatic Check And Monitor System; Device Firmware Update Power supply 230V 50/60 Hz Input power 3.7 kW Output induction power 4 kVA Power factor for 100% output 1 Consumption 16 A Protective system IP22 Working frequency 18-60 Hz Output control (CP mode) 10-100% of Pmax, fluent Induction burner length 2 m Coolant capacity 2.5 l Weight 13.5 kg, including water cooling, small dimensions – size of a small welding machine Package size 700 x 350 x 300 mm - 16 kg
Induction heater for auto body dents 1000W
The dent repair tool can flameless heat the panel behind the paint from the outside of the panel, and the body is restored to its pre-deformed position by induction heating expansion, which is not harmful to the paint. With a maximum output of 1.38KW, this dent repair tool effectively repairs small dents on body and door surfaces. It saves you a lot of time during the repair process. The induction heater has multiple heat dissipation ports at the back and bottom, which can effectively dissipate heat and prolong the service life of the machine. The induction heater with adjustment buttons, you can select the right power by the up or down button to repair different degrees of dents more precisely. The metal body has a smooth surface for easy cleaning. You can wipe it with a wet rag after the power is off. Voltage 220V, 50Hz Power supply cable 1.5 m Power 1.38 kW / 3.0 kVA / 1000W Operating frequency 150 kHz Dimensions 135 x 250 x 75 mm Weight 4.0 kg 12 month warranty Notes 1. To avoid causing damage to surface painting, do not apply heating on a single dent for a long time. 2. After 3-5 times heating, use a wet towel to reduce surface temperature. 3. Do not let the heating head touch the surface painting, leave a gap of 3-5mm. 4. During the heating process, the painting surface becomes soft, applying pressure on the surface will increase the dent.
Industrial hose reel PU Ø12.5 x 16mm, 15m
Hose size Ø 12.5 x 16 mm Hose length 15 m Max working pressure 218 Psi / 15 bar Automatic hose stop and rewind Material PU Plastic housing Weight 9.0 kg
Industrial hose reel PU Ø12.5 x 16mm, 25m
Hose size Ø 12.5 x 16 mm Hose length 25 m Max working pressure 218 Psi / 15 bar Automatic hose stop and rewind Material PU Plastic housing Weight 11.0 kg
Industrial hose reel PU Ø8 x 12mm, 20m
Hose size Ø 8 x 12 mm Hose length 20 m Max working pressure 218 Psi / 15 bar Automatic hose stop and rewind Material PU Plastic housing Weight 6.8 kg
Injector seal removal tool
For seals which inner diameter is 7.5 - 10 mm Remove the copper injector seal when it stuck into the head Drop the tool into the hole left by injector, tighten the handle and lift out the seal
Inner bearing puller kit 16pcs
Set includes one slide hammer assemble & 4 clamps Open clamps by turning handle clockwise to snug against the bearing for pulling out evenly without damage the parts 10 pcs. Clamps 8 - 11, 12 - 17, 18 - 23, 24 - 29, 30 - 34, 34 – 38, 39 - 43, 44 - 48, 49 - 53, 54 - 58 mm 3 pcs. Screw M10 x 1.5P, M10 x 1.5P & M8 x 1.25P, M10 x 1.5P & M6 x 1.0P 1 pcs. Slide Hammer 1 pcs. Two Jaw Puller Packing - Plastic box
Inner bearing puller kit 5pcs.
1 pcs. Sliding hammer 0.85 kg, L= 377 mm 4 pcs. Collet: 10-14 mm 15-19 mm 18-25 mm 25-32 mm Video of analog product:
Inner tie rod remover & installer 31.75 - 50.8mm
Practical: the 3/8" Inner Tie Rod Tool turns smooth tie rods easily and removes inner tie rods without removing the outer tie rod Compatibility: fit for all standard tie rods with smooth cylinder ends Work on any rod that fits between the 76.2 mm top and bottom components with both 14.29 mm nuts screwed on and tightened Easy to use: simply slide tool over the end and tighten collar to allow access with a 9.5 mm drive extension Adapters can be used for larger breaker bars/extensions Strong grip: tool teeth grip the tie rod securely as you plug in a socket wrench or breaker bar and turn these smooth tie rod ends Convenient: design with compact/low profile means no bulky tool to store Best tool for servicing inner tie rods to easily remove, repair and install
Inner-driveshaft extractor 390mm
Tool for extracting inner-driveshaft, total length 390mm, internal gap 82mm. Suitable for the following car brands: Ford, Mazda, Volvo, Renault, Dacia and other front-wheel drive cars.
Insert bearing puller kit 10pcs (L)
Remover with double arms- 1pc Arm extenders - 2 pcs Central thread screw - 1 pc Ball end thread puller adapters (9, 11, 12.5 mm) - 6 pcs
Insert bearing puller kit 13pcs (S)
Remover with double levers - 1pc Lever extenders - 2 pcs Central thread screw - 1 pc Ball end thread puller adapters (5, 6, 8 mm) - 6 pcs Socket - 1 pc
Insert tool with metal handle
Insert tool with a metal handle, used in tyre repair to insert repair strings into a puncture. The metal handle is durable and lets you apply more force when working with stiff tyres.Handle: metalApplication: tyre repair
Inside corner staples 0.8mm (100pcs)
Hot staples for plastic welder guns DH50 and DHB100
Inside tooth groove bearing lock nut set (13pcs) KM0-KM12
For easy loosening and tightening of grooved nuts according to DIN standard 981 on shafts, clamping or pulling sleeves etc. suitable for following grooved nut sizes: KM0 (M10) – KM1 (M12) – KM2 (M15) – KM3 (M17) – KM4 (M20) – KM5 (M25) – KM6 (M30) – KM7 (M35) – KM8 (M40) – KM9 (M45) – KM10 (M50) – KM11 (M55) – KM12 (M60) Drive profile size, metric 12,5 mm Material Chrome Molybdenum Steel Length 60 mm Gross weight 7400 g Drive profile size, inch 1/2 ” Drive profile Internal square