Product catalog
Hydraulic cylinder ram 20t (50mm)
Capacity 20 t Stroke 50 mm Min height 155 mm Outer Ø 76 mm Inner Ø 60 mm Ram Ø 48 mm Working preasure 69.4 Mpa Connection 1/4" - 13/16"
Hydraulic cylinder ram 4t (18mm)
Capacity 4 t Stroke 18 mm Cylinder body height 40 mm Working pressure 70.8 Mpa Connection 1/4" - 13/16"
Hydraulic cylinder seal ring instanlation clamp tool set 3pcs
This item is a rapid and safe tool for installing flexible rod seals Making a smaller size than the gland hole by turning the seal to an omega shape can avoid most of the damage No handle to avoid the possibility of the product obstructing your view and causing the shaft and cavity to be scratched Very easy to use. The product is very convenient, saves time and alleviates work difficulties S size - 22-40 mm M size - 40-70 mm L size - 70-165 mm Manual Instruction: 1. Put one handle into the holder, and place the seal on the claw. 2. Lead the seal with one hand when turning the handle with the other. 3. Hold both handles then take them away from the holder. 4. Put the seal aside. Release a handle then turn it ground gently. 5. Take the twistor away from the gland smoothly.
Hydraulic floor jack 3t. Low profile
Low profile/High lifting For profesional use Fast lift without load Sealed cast iron pump base operates twin pistons for faster rising action Reinforced structural lifting arm and thick u-channel frame side plates will keep all your jobs rock solid Rear casters pivot 360 degree for easy positioning & usage Heavy duty two piece grip provides easy handling equipped with foam bumper to prevent damage to vehicle finish The height can be easily and quickly adjusted, the jack is not only suitable for jacking up a light-duty car with low chassis, but also for a heavy-duty car with a high chassis, it has a wide range of applications Capacity 2 t / 3 t Min height 98 / 245 mm Max height 580 / 765 mm Dimensions 805 x 365 x 170 mm Weight 46 kg Packing - Cardboard box Package size 870 x 425 x 195 mm
Hydraulic floor jack 3t. Low profile
Low profile, with rubber pad Capacity 3 t Min height 83 mm Max height 500 mm Weight 29.0 kg Fast lift without load Fast lift dual pump Packing - Cardboard box Package size 710 x 380 x 165 mm
Hydraulic floor jack with safety pin 2.5t
Capacity 2.5 t Min height 133 mm Max height 387 mm Weight 12 kg CE conformity Overall dimensions 520 x 188 x 148 mm Package size 555 x 200 x 165 mm
Hydraulic foot pump 700cc with hose
Oil capacity 700 cc Output flow rate with load 2.3 l/min Max working pressure 70 Mpa Dimensions 620x220x280 mm Weight 15 kg Foot pedal
Hydraulic foot pump for shop press 20t
Capacity 20 t Package size 940 x 270 x 165 mm
Hydraulic foot pump for shop press 30t
Capacity 30 t Package size 940 x 265 x 165 mm
Hydraulic foot pump for shop press 40t
Capacity 40 t Package size 940 x 265 x 165 mm
Hydraulic foot pump for shop press 50t
Capacity 50 t Package size 940 x 265 x 165 mm
Hydraulic gear puller 2/3 jaw - 250mm
Hydraulic puller with 2 or 3 jaws for removing gears, bearings, pulleys and other parts pressed onto a shaft. The hydraulic action generates a high pulling force with little effort.Number of jaws: 2/3Available sizes: 5 t, Ø200 mm, stroke 50 mm; 250 mm; 300 mm; 20 t, Ø350 mm, stroke 75 mm; 30 t, Ø400 mm, stroke 75 mm; 500 mm
Hydraulic hand pump 10t with hose
This hydraulic hand pump with hose is designed to operate hydraulic cylinders, presses and body repair kits. The hand lever generates hydraulic pressure, which is delivered through the hose to the connected cylinder or tool.Brand: TONGLICapacity: 10 tIncluded: hose
Hydraulic hand pump 10t with hose and gauge
Capacity 10t Tank volume 500 ml Gauge 0 - 14500 psi, 0 - 100 MPa Weight 7.2 kg
Hydraulic hand pump 20t with hose
Hydraulic hand pump with hose for operating hydraulic cylinders, presses and other hydraulic tools. Pressure is generated with a hand lever, so no electricity or compressed air is needed to operate it.Brand: TONGLIRated for: 20 t equipmentIncluded: hose
Hydraulic hand pump and hose for shop press 20t
Hydraulic hand pump with hose for 20 t shop presses. Intended as a replacement pump that generates the hydraulic pressure the press needs, restoring the press to working order.Brand: TONGRUNIncludes: hand pump and hosePress capacity: 20 t
Hydraulic hand pump and hose for shop press 30t
Hydraulic hand pump with hose for a 30 t shop press. The pump generates the hydraulic pressure that drives the press cylinder; it is used as a spare part or to replace a faulty pump.Brand: TONGRUNApplication: 30 t shop pressIncludes: hand pump and hose
Hydraulic hand pump for shop press 12t
This hydraulic hand pump is designed for a 12 t shop press. The hand lever generates hydraulic pressure that drives the press cylinder for pressing bearings, bushings and other parts in and out. It can be fitted as a replacement pump.Brand: TONGRUNUse: shop pressCapacity: 12 t
Hydraulic hand pump for shop press 20t
Hydraulic hand pump for workshop hydraulic presses. Pressure is generated with a hand lever, so no electricity or compressed air is required; the pump is also suitable for replacing a faulty press pump.Brand: TONGRUNFor presses: 20 tType: hydraulic hand pump
Hydraulic hand pump for shop press 30t with hose
Hydraulic hand pump with hose, designed for 30 t shop presses. The pump builds pressure in the press's hydraulic cylinder and can also serve as a replacement for a damaged or worn pump.Brand: TONGLIDesigned for: 30 t shop pressesIncluded: hoseOperation: manual
Hydraulic holepuncher 15t 63-114mm
Punching range Ø - 16-114 mm Maximum stroke - 22mm Power - 15t Weight - 16.5 kg
Hydraulic holepuncher 8t 16-51mm
Punched holes Ø - 16-60 mm Maximum step - 22mm Power - 8t Weight - 8.75 kg
Hydraulic hoses set for QJY4.0-D-Q
Hose L = 2790 mm and 1040 mm Thread M16x1.5 Photo is only illustrative