Product catalog
Hook hand scale 300kg
Hook scale, can be used in warehouses, shops and transport companies. It takes less than 10 seconds to stabilize the reading. The scale is powered by 3 AA batteries , on which the scale will operate for approximately 150 hours . It has an easy-to-read LCD screen . Reinforced structure of the strain gauge sensor, 8mm thick. Possibility to change the unit (kg, lb, N). The casing is made of aluminum and guarantees shock resistance. Additionally, it has a removable hook. Product features: Taring (TARE) Result hold (HOLD) Zeroing (ZERO) Changing the unit (UNIT) Sleep mode Overload warning Specifications: Power supply: 3 x AA 1.5V batteries (Included) Weighing precision: 0.1 Weighing range: 0.2 - 300 kg Measurements: g, kg, lb, LCD display Digit height: 16mm Dimensions: 265 x 46 x 65 mm Weight: approx. 0.6 kg Messages: O-ld - overload (too much product weight) Lo - low battery
Hose clamp - 12-22mm
Made of galvanized steel W1 Complies with DIN 3017 A special screw allows tightening with a flat spanner and a flat or Phillips screwdriver It is widely used for fixing rubber hoses and pipes in water, oil, pneumatic, etc. installations
Hose clamp pliers
Swivel tips to allow easy access to confined areas Ratchet lock mechanism holds jaws open Works on most flat-band hose clamps
Hose clamp pliers
Swivel tips to allow easy access to confined areas Ratchet lock mechanism holds jaws open L= 215 mm HRC 40
Hose clamp pliers set 9pcs
Pliers can be locked, feeing up your hands and making your job easier and faster. Long reach hose clamp plier with wire flexible wire shaft. Convenient for working hidden areas and long distance Designed to replace fuel, oil and water hoses. For the removal and locking of clamps into open position. 1 pc. Fuel hose clamp tool, 1 pc. Swivel jaw spring clamps, 1 pc. Swivel Jaw Band Clamps, 1 pc. Pliers with angled band, 1 pc. Pliers with flat band clamps, 1 pc. Clic-R® Pliers, 1 pc. Hose removal pliers, 1 pc. hose collector, 1 pc. Double screwdriver. Handles covered with heat-shrinkable rubber, Spring-loaded pliers and universal, movable tips with semicircular, notched gripping surfaces
Hose clamp tool (Bar Type)
140mm long hose clamp tool. Suitable for use on rubber hoses, making it ideal for both brake and fuel lines together with coolant hoses. Steel construction with round chrome plated bars to help prevent damage. Clamps any hose simply and effectively. Chrome plated bars. Use on brake, fuel and heater hoses. No sharp edges. Ensures complete clamp.
Hose clamps set (175pcs)(5-27mm)
A set of 175 pieces of galvanized steel clamps placed in a convenient sorter Sizes: 5 - 7 mm - 25 pcs 7 - 9 mm - 25 pcs 9 - 11 mm - 25 pcs 11 - 13 mm - 20 pcs 13 - 15 mm - 20 pcs 15 - 18 mm - 20 pcs 17 - 20 mm - 15 pcs 20 - 23 mm - 15 pcs 23 - 27 mm - 10 pcs
Hose clamps set (365pcs) (8-80mm)
Ties are widely used for fixing rubber hoses and pipes in water and pneumatic installations, etc. in gardening and automotive Contents of the set: TORRO-S STRIP 8-16 / 9 - 50 pcs TORRO-S STRIP 10-16 / 9 - 50 pcs TORRO-S STRIP 12-22 / 9 - 40 pcs TORRO-S STRIP 16-27 / 9 - 40 pcs TORRO-S STRIP 20-32 / 9 - 35 pcs TORRO-S STRIP 25-40 / 9 - 35 pcs TORRO-S STRIP 35-50 / 9 - 40 pcs TORRO-S STRIP 40-60 / 9 - 35 pcs TORRO-S STRIP 50-70 / 9 - 25 pcs TORRO-S STRIP 60-80 / 9 - 15 pcs SW 7 flexible screwdriver Exhibition hanger
Hose pinch tool kit 2pcs
Alloy body with steel clamp arm Compact design allows use in confined space
Hose removing pliers 5-15mm
These hose removal pliers are made of manganese steel, strong and sturdy, with high- quality springs, moderate strength and handles with a knurled design for a non-slip, more comfortable grip These vacuum lines tube hose removal are quick and easy to access in tight areas, making disassembly faster and more convenient. They offer a quicker and more effective method of removal than other traditional options such as prying or twisting. This not only saves you time, but it also reduces the risk of damaging the hose or the parts it is attached to. These separator pliers pipe repairing are their ability to remove fuel, vacuum, or heater hoses from 5/32” to 1/2” (5 to 15 mm) diameter with ease. This makes them compatible with a wide range of hoses and pipes,such as natural gas pipes, electric auxiliary pipes, heat radiation oil pipes, plumbing tanks, radiators, pumps, air cleaners, and various other hard-to-remove pipes,making them a versatile addition to your tool kit. These auto fuel extremely helpful for pushing and separating stubborn hoses, you can pull back the stubborn tubing while sliding this in and squeezing the grip. By squeezing the grip, it pushes the tips apart, helping to move the tubing. They may not be suitable for very large hoses.
Hose reparator 1/2"
Hose repair connector for 1/2" garden hoses. Used to join the two ends after the damaged section of a hose has been cut out, so the hose can continue to be used for watering without buying a new one. It can also join two hoses to make a longer watering line.Size: 1/2"Use: watering equipment
Hose reparator 1/2"-3/4"
Hose repairer for joining a damaged garden hose after cutting out the faulty section. It quickly restores the hose to use without buying a new one and is suitable for watering systems.Size: 1/2"–3/4"Application: garden hose repair
Hose reparator 3/4"
A hose repair connector designed for fixing a damaged garden hose: the damaged section is cut out and the two hose ends are joined with the connector. This quickly restores the hose without having to buy a new one.Hose size: 3/4"Use: garden hose repair
Hose water nozzle set 1/2" 4pcs
The set includes: tap connection, standard fitting and stop fitting for 1/2" hose, multi-purpose spray gun 6 types of stream For a wide range of applications - watering, irrigation, cleaning Articles made of ABS
hot air gun HG20-600 No.20 Motor assy. Spare part
Motor assembly (part No. 20) – a spare part for the WORCRAFT HG20-600 hot air gun. Intended to replace a faulty motor and restore the gun's airflow and working order without buying a new tool.Brand: WORCRAFTCompatible with: HG20-600Part number: 20Part type: spare part
Hot air gun set 4pcs.
Output 2000W Voltage 220-240V, 50/60Hz Air flow 500 L/min Temperature for 1 stage 350°C Temperature for 2 stage 600°C 4pcs. Nozzles CE conformity
Hot glue stick set (green) (12pcs) 7.2x100mm
Bond strength: 6000 MPAS (+/- 1000 MPAS) Universal glue is ideal for gluing various types of materials, including: paper, cardboard, plastics, including PVC insulation, fabrics, leather, wood Warm-up time 20 - 30 s Working temperature: from 170 to 200 ° C Melting point: 85 ° C (+/- 2 ° C)
Hot glue stick set (red) (12pcs) 7.2x100mm
Bond strength: 6000 MPAS (+/- 1000 MPAS) Universal glue is ideal for gluing various types of materials, including: paper, cardboard, plastics, including PVC insulation, fabrics, leather, wood Warm-up time 20 - 30 s Working temperature: from 170 to 200 ° C Melting point: 85 ° C (+/- 2 ° C)
Hot glue stick set (red) (5pcs) 11x200mm
Bond strength: 6000 MPAS (+/- 1000 MPAS) Universal glue is ideal for gluing various types of materials, including: paper, cardboard, plastics, including PVC insulation, fabrics, leather, wood Warm-up time 20 - 30 s Working temperature: from 170 to 200 ° C Melting point: 85 ° C (+/- 2 ° C)
Hot glue stick set (yellow) (12pcs) 7.2x100mm
Bond strength: 6000 MPAS (+/- 1000 MPAS) Universal glue is ideal for gluing various types of materials, including: paper, cardboard, plastics, including PVC insulation, fabrics, leather, wood Warm-up time 20 - 30 s Working temperature: from 170 to 200 ° C Melting point: 85 ° C (+/- 2 ° C)
HP Air spray gun Ø0.8mm (HVLP) MINI
Capacity of cup 100 ml Standard nozzle Ø 0.8 mm Feed type - gravity. Plastic cup Air inlet (NPS) - 1/4" Air hose (NPS) - 3/8" Recommended air presure 2 - 3.5 bar Pattern width 150 mm Average air consumption 230 l/m