Product catalog
Pump for hydraulic spring compressor TRK15002
Pump supplied as a spare part for the TONGRUN TRK15002 hydraulic spring compressor. It is intended to replace a damaged or worn pump, restoring the unit for compressing coil springs during suspension repair.Brand: TONGRUNCompatibility: TRK15002 hydraulic spring compressorType: spare part
Pump for pneumatic-hydraulic jack T22035
Pump – a spare part for the T22035 pneumatic-hydraulic jack. Intended to replace a faulty or worn pump, restoring the jack's ability to lift loads and extending its service life.Compatible with: T22035Jack type: pneumatic-hydraulicPart type: spare part
Pump oiler (transparent) 250cc
Pump oiler with a hand pump for precise delivery of oil to mechanisms, bearings, chains and other lubrication points. The transparent body shows how much oil is left.Brand: CHANGLU TOOLSCapacity: 250 ccBody: transparent
Pump water hose 2" 50m
Hose diameter of 2 "/ 50 mm Length 50 m Intended for pumping water with combustion pumps, the hose has no connection ends
Punch set 15pcs.
Size Ø 2, 2.5, 3.2, 4, 4.8, 5.5, 6.4, 8, 9.5, 11.1, 12.7, 14, 15.8, 19, 22 mm
Push to fit quick connector disconnect tool
Designed for disconnecting push-to-fit quick connectors (such as SAE J2044) 2-button type which are widely found in fluid/vapor transfer system, including fuel line/EVAP system (petrol/diesel), SCR line (Adblue) system, cooling/heating system, and braking line system, etc. Multi-angle jaw design allows various approach to hard to reach/difficult access area
Putty scraper with wood handle
Can be used for clearing dirt on engine cylinder surface and all kind of metal surface
PVC air hose with quick coupler Ø6 x 10mm - Ø6 x 10mm, 12m
Professional, flexible compressed air hose. Adapted to vehicles with an air compressor. Used for pumping and blowing in buses, trucks, semi-trailers, agricultural tractors, etc. Cable terminated with connectors on both sides. On one side, it ends with a butterfly tip with an M16x1.5 mm internal thread adapted to car compressors. On the other hand, a universal metal quick connector enabling the connection of various pneumatic devices and tools, e.g. pumping or blowing guns. The hose is made of three layers. The inner part is made of soft PVC and a dense, textile reinforcing polyester braid. Outer layer made of weather-resistant PVC. outer diameter: 10 mm inner diameter: 6 mm working pressure: 1.0 MPa (10 atm) at an ambient temperature of 23 ° C burst pressure: 3.5 MPA (35 atm) at an ambient temperature of 23 °C safe operating temperature range: -20 °C to 60 °C weight: 0.5 kg
PVC Pipe cutter 3-42mm
Cutting diameter 3-42 mm For PVC, aluminium and plastic pipes With ratcheting mechanism All metal construction for greater durability Technical Specifications: Length 220 mm
PVC Pipe cutter 33mm
Cutting diameter up to 33 mm For PVC, aluminium and plastic pipes SK5 material 4 layer process PTFE triangular blade, cutting sharp, easy and labor-saving, cut is smooth The handle is covered with plastic, which feels comfortable to the touch, and the tail buckle can be opened automatically, which is easy to carry With ratcheting mechanism All metal construction for greater durability
PVC Pipe cutter 64mm
Max cutting diameter 64 mm For PVC, aluminium and plastic pipes Stainless steel blade, hardness (HRC) 54 Material Aluminum alloy body
PVC plastic pipe welder 1200W
The welding machine is used for polyfusion welding of pipes and fittings made of thermoplastics (polyethylene, polypropylene, etc.) during the installation of: cold water, hot water, central heating Rated voltage 230V, 50Hz Rated power input 1200W Stand for the welding machine Equipped with an electronic temperature controller Tube adapter Ø 20, 25, 32, 40, 50, 63 mm Surface temperature of the tube adapters 50 - 300° C Heating time 18 min 0 - 300° C
PVC plastic pipe welder 1300W
The welding machine is used for polyfusion welding of pipes and fittings made of thermoplastics (polyethylene, polypropylene, etc.) during the installation of: cold water, hot water, central heating Rated voltage 230V, 50Hz Rated power input 1300W Tube adapter Ø 20, 25, 32 mm Surface temperature of the tube adapters 50 - 300° C Weight 1.4 kg
PVC plastic pipe welder 1500W
The welding machine is used for polyfusion welding of pipes and fittings made of thermoplastics (polyethylene, polypropylene, etc.) during the installation of: cold water, hot water, central heating Rated voltage 230 V, 50 Hz Rated power input 1500 W 5 pcs. Tube adapter Ø 20, 25, 32, 40, 50, 63 mm Surface temperature of the tube adapters 50 - 300° C Heating time 18 min 0 - 300° C Weight 1.9 kg
PVC plastic pipe welder 1500W
Rated voltage 230V, 50Hz Rated power input 1500W 6pcs. Tube adapter Ø 20, 25, 32, 40, 50, 63mm Surface temperature of the tube adapters 0-300°C Heating time of the tube adapters 78s Working temperature 0 - 40°C Electrical insulation class I Protection grade IPX0 Weight 3.35kg CE conformity Packing - Metal box
PVC plastic pipe welder 2900W
The welding machine is used for polyfusion welding of pipes and fittings made of thermoplastics (polyethylene, polypropylene, etc.) during the installation of: cold water, hot water, central heating Rated voltage 230V, 50Hz Rated power input 2900W Tube adapter Ø 20, 25, 32, 40, 50, 63 mm Surface temperature of the tube adapters 50 - 300° C Weight 4.2 kg
PVC plastic pipe welder 800W
Rated voltage 230V, 50Hz Rated power input 800W 6pcs. Tube adapter Ø 16, 20, 25, 32, 40, 50mm Surface temperature of the tube adapters 0-300°C Working temperature 0 - 40°C Electrical insulation class I Protection grade IPX4 Weight 2.70kg CE conformity Packing - Metal box
PVC plastic pipe welder 850W
Rated voltage 230V, 50Hz Rated power input 850W 6pcs. Tube adapter Ø 20, 25, 32, 40, 50, 63mm Surface temperature of the tube adapters 0-300°C Digital display Working temperature 0 - 40°C Electrical insulation class I Protection grade IPX0 Weight 4.0kg CE conformity Packing - Metal box
QB machine swivel vice - Jaw width 136mm, 18.0kg
QB machine vice with a swivel base, designed for securely clamping workpieces on the table of a drilling machine, milling machine or other machine tool. The swivel base allows the vice to be turned to the required angle.Type: QB machine vice with swivel baseAvailable sizes: jaw width 136 mm (18.0 kg), 160 mm (24.0 kg), 200 mm (40.0 kg), 250 mm (65.0 kg), 320 mm (92.0 kg)
QB machine swivel vice 160mm
Jaw width 160 mm Jaw height 52 mm Max opening 125 mm Weight 36.0 kg Package size 450 x 200 x 190 mm