Product catalog
Protective knee pads
The inner side of the knee pads is filled with gel to maximize comfort and improve shock absorption. Weight: 0.6 kg Quantity: set of 2 pcs. Color: black - orange Height: 31 cm Width: 17 cm
Protective sandblasting mask
Protects the face during sandblasting or sodablasting
Protractor with ruler 120x150mm
Made of high carbon steel Measuring range 180 ° Resolution 1 °, accuracy +/- 0.1 ° For measuring work in many technical industries
Protractor with ruler 150x200mm
Made of high carbon steel Measuring range 180 ° Resolution 1 °, accuracy +/- 0.1 ° For measuring work in many technical industries
Pruning saw with sheath 300mm
Hacksaw for pruning branches Specially sharpened teeth allow for fast, efficient cutting Ergonomic plastic handle with hanging hole The set includes a plastic holster that protects the blade It has a handle that allows you to attach it to a belt, e.g. when working in the crown of trees This makes pruning at heights safer and more efficient Material: steel L= 300 mm
Pry bar set 3pcs
Solidly made crowbars made of 40 Cr steel They are used in every workshop, for various types of disassembly works, prying, bending, etc. The crowbars are adapted to the possibility of hammering A rod with a rectangular cross-section, a properly profiled handle, covered with rubber for a better grip The set includes three crowbars with the lengths 205, 310 and 400 mm
Pry bar set 4pcs
Hardened and tempered chrome vanadium steel blades Sizes: 1 pcs. 11 x 600 mm 1 pcs. 11 x 450 mm 1 pcs. 9.5 x 300 mm 1 pcs. 6 x 200 mm
Pry bar set 4pcs.
Hardened and tempered chrome vanadium steel blades Sizes: 1 pcs. 11 x 600 mm 1 pcs. 11 x 450 mm 1 pcs. 9.5 x 300 mm 1 pcs. 6 x 200 mm
Pull clamp C-type 3t
C-type pull clamp for gripping, pulling and straightening body panels and frame parts. It is used together with body straightening equipment, chains or hydraulic pullers in body repair work. The clamp grips the damaged area securely so it can be pulled in the required direction.Type: C-typeLoad: 3 t
Pull clamp chain hook 6t
A chain hook for pull clamps, designed for body straightening work – it connects the pulling chain to a clamp attached to the vehicle body. It is used on body repair benches and together with hydraulic pullers.Rated load: 6 tUse: body repair
Pull clamp frame rack 5t
Pull clamp rated at 5 t for body repair. Designed for gripping and holding body or frame sections while straightening them with a pulling device or frame rack. Useful in body shops for correcting deformations.Load: 5 tUse: body repair
Pull clamp frame rack multi-way 5t
Multi-way pull clamp rated at 5 t for body repair. It grips body or frame sections and allows them to be pulled in different directions while straightening with a pulling device or frame rack.Load: 5 tType: multi-wayUse: body repair
Pull clamp mini 3t
Mini pull clamp for car body repair. It is attached to the edge of a body panel and used together with a pulling system or chain to pull out and straighten deformed body parts.Load: 3 tApplication: car body repair
Pull clamp mini two-way 3t
Two-way mini pull clamp for gripping and pulling body panels and parts during body repair work. Its compact size allows it to be used where larger clamps cannot reach. It is used with body straightening equipment, chains or hydraulic pullers.Type: two-way, miniLoad: 3 t
Pull clamp small mouth 5t
Pull clamp with a small mouth for body straightening work. The clamp is attached to a body edge or flange and connected to a pulling chain or straightening equipment to pull out deformed sections.Load: 5 tMouth: smallApplication: body repair
Pull hook set C-type 6t
Material 45# steel Spray coating, metal plate stretching
Pull-back ram 10t
Capacity 10 t Stroke, 130 mm Max length 715 mm Connection 1/4" - 13/16"
Pull-back ram 20t
Capacity 20t Stroke 200 mm Max length 980mm Connection 1/4" - 13/16"
Pull-back ram 5t, with hook
Capacity 5 t Stroke, 130 mm Max length 665 mm Connection 1/4" - 13/16"
Pulley extractor and reaction tool
For VW, Audi, Seat, Škoda, Opel/Vauxhall, Ford, BMW, Mercedes, Peugeot, Citroen, Renault, Fiat and most of Japanese vehicles
Pulley for MZB compressor - V-025, LVA-65 int/ext Ø250/25mm 1A
Pulley for MZB compressors, supplied as a spare part for the belt drive. Used to replace a worn or damaged pulley and restore correct compressor operation. Choose the version that matches your compressor model.Brand: MZBAvailable sizes: V-025, LVA-65 – inner/outer Ø250/25 mm, 1A; W-0.36/8 – inner/outer Ø265/25 mm, 2A; VA-70 – inner/outer Ø265/25 mm, 1A; V-0.6, W-0.9 – inner/outer Ø350/35 mm, 2B; 4V-1.05/12.5 – inner/outer Ø475/40 mm, 2B
Pulling pliers clamp vice grips
L= 235 mm Material: Head material CRV, handle material Q235 Surface treatment: Electroplating Weight: 1 kg This heavy duty locking sheet metal clamp is designed to clamp and pull multiple rivets (studs) as well as vertical or horizontal flanges, making it an essential tool for automotive sheet metal processing
Pump for hydraulic spring compressor TL1500-5A
Pump for the TONGLI TL1500-5A hydraulic spring compressor. This spare part replaces a worn or damaged pump, restoring the spring compressor to working order without replacing the whole unit. Please check that your model matches before ordering.Brand: TONGLICompatibility: TL1500-5AType: spare part