Welding accessories. Spare parts
Electrode holder for MMA-200FI / MMA-250FI / MIG-250MI. Spare part
Electrode holder supplied as a spare part for YOULI welding machines. It holds the electrode securely and delivers the welding current to it during manual arc welding with coated electrodes (MMA).Brand: YOULICompatibility: MMA-200FI, MMA-250FI, MIG-250MIType: spare part
Electrode holder handle 800A
Electrode holder rated at 800 A, designed for clamping and holding electrodes during stick (MMA) welding. Also suitable for replacing a worn or damaged electrode holder on a welding cable.Brand: CHANGLU TOOLSCurrent: 800 A
Electrode holder with cable for MMA-200FI / MMA-250FI / MIG-250M
2 m (16 mm2) 200 Amp
Folding welding table
Dimensions 66 x 59 x 83 cm Folding welding table, perfect for mobile renovation, construction and service works The design enables the attachment of additional tables in order to obtain a larger work surface The table top has retractable edge guides for use as limiters or for fixing workpieces Material steel frame, steel plate top Substructure finish black powder coating The surface of the steel worktop is galvanized and anti-rust Has an adjustable angle of inclination Plates with five stops and two clamping screws Load capacity 150 kg
Ground wire and ground clamp Dinse 10-25mm²
Suitable for the following models: MIG-135A, MMA-200FI, MMA-250FI, CUT-40, CUT-60, CUT-80, CUT-120I, MIG-250MI, WSME-250E, ARC-200, ARC-200M Cable - 25mm² The maximum opening of the terminals is up to 500 mm
Ground wire and ground clamp for MMA-200FI / MMA-250FI / MIG-250MI
Ground cable with earth clamp for YOULI MMA-200FI, MMA-250FI and MIG-250MI welding machines. The clamp is attached to the workpiece or welding table to complete the welding current circuit. Suitable for replacing a worn or damaged cable.Brand: YOULICompatible with: MMA-200FI, MMA-250FI, MIG-250MIIncludes: cable and ground clamp
Ground wire and ground clamp for MMA-250 Dinse 35-50mm². Spare part
Fits this model: MMA-250 Cable - 25mm² The maximum opening of the terminals is up to 500 mm
Magnetic ground clamp 500A 7kg
Material: steel sheet | ferrite magnet Application: non-invasive and quick assembly of the mass point for the welded material Diameter: 85 mm Welding current: 500A Lifting capacity: 7 kg Handle length: 160 mm Welding ground clamp. Magnet force 7 kg, transfers current up to 500A The tool enables almost non-invasive and quick installation of the ground point for the welded material. Apply the clamp from the magnet side to the welded material and grab the ground clamp from the welding machine by the protruding clamp screw.
Magnetic support stand for MIG welding torch
Made of 2.5 mm thick steel with a solid and powerful ferrite magnet at the base Powder coated surface Total height 137 mm Maximum width 95 mm Magnetic block diameter 86 mm Weight 0.74 kg
Magnetic support stand for TIG welding torch
Made of 2.5 mm thick steel with a solid and powerful ferrite magnet at the base Powder coated surface Total height 154 mm Maximum width 80 mm Magnetic block diameter 86 mm Weight 0.74 kg
Magnetic welding holder - 3" 83x119x14mm
Applicable angle: 45°,90°,135° Pull Force 50 Lbs Material A3 steel Surface treatment powder coated
Magnetic welding holder 111x136x24mm
Load capacity 34 kg Angles 30°, 45°, 60°, 75°, 90°, 135° Dimensions 111 x 136 x 24 mm
Magnetic welding holder set (2pcs) 98x113mm, L type
Made of steel sheet and strong magnets Powder coated surface Designed for temporary joining of metal elements during welding, drilling and painting Holding force: 10 kg use at an angle of 60 °, 90 ° and 120 ° Dimensions: 98 x 113 mm
Magnetic welding holder set (4pcs)(45°-90°-135°)
Made of steel sheet and strong ferrite magnets Powder coated surface Designed for temporary joining of metal elements during welding, drilling and painting Holding force: 4.5 kg use at an angle of 45 °, 90 ° and 135 ° Dimensions: 43 x 72 x 12 mm
Magnetic welding holder set (6pcs)(45°-90°-135°)
Made of steel sheet and strong ferrite magnets Powder coated surface Designed for temporary joining of metal elements during welding, drilling and painting Holding force 4.5 kg Use at an angle of 45 °, 90 ° and 135 ° Dimensions 43 x 72 x 12 mm 2 pieces of large angles: Holding force: 11.5 kg Dimensions 82 x 118 x 14 mm
Nozzle for cutting torch 100 - No. 2
Cutting nozzle is a replaceable part of a gas cutting torch that forms the cutting flame and oxygen jet. Replacing a worn nozzle in good time helps maintain a stable flame and a clean cut.Brand: CHANGLU TOOLSCompatibility: cutting torch 100Available sizes: No. 1, No. 2, No. 3
Nozzle for cutting torch 30 - No. 2
Nozzle for the cutting torch 30, intended to replace a worn or damaged nozzle. The nozzle number is chosen according to the thickness of the metal being cut and the job at hand.Brand: CHANGLU TOOLSCompatible with: cutting torch 30Available sizes: No. 1, No. 2, No. 3
Nozzle PNME 5/64 No.3 (30-50mm) for cutting torch 374 P
Cutting depth 30 - 50 mm
Nozzle set for plasma cutter CUT-60L
Nozzle set for the CUT-60L plasma cutter. Nozzles are replaceable plasma torch parts that wear during use; replacing them in good time helps maintain an accurate, clean cut.Brand: PULICompatibility: CUT-60L plasma cutterType: nozzle set
Nozzle set for plasma cutter CUT-80A
Nozzle set for the CUT-80A plasma cutter, intended to replace worn nozzles. Changing nozzles regularly helps maintain a stable arc and a clean, high-quality cut.Brand: PULICompatible with: CUT-80APart type: consumables / spare parts
Nozzle set for plasma cutter CUT40
Nozzle set for the JUBA CUT40 plasma cutter. Nozzles wear during cutting, so they are replaced regularly to keep a precise, clean cut and a stable plasma arc.Brand: JUBACompatibility: CUT40 plasma cutterType: replacement nozzles
Nozzle set for plasma cutter YLCUT-40
A nozzle set for the YOULI YLCUT-40 plasma cutter. Nozzles are consumable parts of the plasma torch that shape the plasma arc, so they need regular replacement to maintain a clean and accurate cut.Brand: YOULICompatibility: YLCUT-40 plasma cutterType: nozzles (consumables)
Nozzle set for plasma cutter YLCUT-60
Nozzle set for the YLCUT-60 plasma cutter. Nozzles are replaceable plasma torch parts that wear during use; replacing them in good time helps maintain an accurate, clean cut.Brand: YOULICompatibility: YLCUT-60 plasma cutterType: nozzle set