Welding equipment
Contact tip 1.2mm for MIG-315IT
1.2 mm contact tip for the YOULI MIG-315IT MIG welder. The contact tip transfers welding current to the wire, so worn tips should be replaced regularly to keep a stable arc and smooth wire feed.Brand: YOULIWire diameter: 1.2 mmCompatibility: MIG-315IT
Cutting nozzle No.1 (8-15mm) for cutting torch 150 P
Cutting nozzle No. 1 (8–15 mm) for the DONMET 150 P cutting torch. Used for oxy-fuel cutting of metal and for replacing a worn or damaged nozzle so the torch delivers a good cut again.Brand: DONMETNozzle number: No. 1 (8–15 mm)Compatible torch: 150 P
Cutting nozzle No.3 (30-50mm) for cutting torch 341 P
Cutting nozzle No. 3 for the DONMET 341 P gas cutting torch. The nozzle is intended for cutting metal 30–50 mm thick; the nozzle number is chosen according to the thickness of the material being cut.Brand: DONMETNozzle number: No. 3Cutting thickness: 30–50 mmCompatibility: 341 P cutting torch
Cutting nozzle No.4 (50-100mm) for cutting torch 150 P
Cutting nozzle No. 4 for the 150 P gas cutting torch. The nozzle size is chosen according to the thickness of the metal being cut; a worn or damaged nozzle should be replaced to keep the cut clean and stable.Brand: DONMETCompatibility: cutting torch 150 PNozzle number: 4Cutting range: 50–100 mm
Cutting nozzle No.6 (200-300mm) for cutting torch 341 P
Cutting nozzle No. 6 is a replaceable part for the DONMET 341 P cutting torch. It is intended for gas cutting of thick metal; replacing a worn nozzle helps maintain a stable flame and a clean cut.Brand: DONMETNozzle No.: 6Cutting thickness: 200–300 mmCompatibility: 341 P cutting torch
Cutting torch 100
1 tip No. 1 Cutting depth up to 2 - 100 mm Consumption: oxygen 2.2 – 2.7 m³/h / acetylene 0.35 – 0.40 m³/h M16 x 1.5 / M16 x 1.5LH Hoses ø 9 mm and ø 9 mm Comply with JB/T 6970 standard manufacturing requirements The main body is made of copper, the whole is polished, and the pure copper knob is used for precise coordination and tightening Stainless steel conduit is not oxidized and can keep the surface clean Good windproof performance and stable outdoor working performance Dimensions 530 x 115 x 55 mm Weight 1.05 kg
Cutting torch 30
1 tip No. 1 Cutting depth up to 2 - 30 mm Consumption: oxygen 0.8 m³/h / acetylene 0.21 m³/h M16 x 1.5 / M16 x 1.5LH Hoses ø 9 mm and ø 9 mm Comply with JB/T 6970 standard manufacturing requirements The main body is made of copper, the whole is polished, and the pure copper knob is used for precise coordination and tightening Stainless steel conduit is not oxidized and can keep the surface clean Good windproof performance and stable outdoor working performance Dimensions 444 x 109 x 59 mm Weight 0.5 kg
Cutting torch 300
1 tip No. 2 Cutting depth up to 7 - 300 mm Consumption: oxygen 9 – 10.8 m³/h / acetylene 0.68 – 0.78 m³/h Working pressure: oxygen 0.65 MPa / acetylene 0.001 – 0.1 MPa M16 x 1.5 / M16 x 1.5LH Hoses ø 9 mm and ø 9 mm Comply with JB/T 6970 standard manufacturing requirements The main body is made of copper, the whole is polished, and the pure copper knob is used for precise coordination and tightening Stainless steel conduit is not oxidized and can keep the surface clean Good windproof performance and stable outdoor working performance Dimensions 650 x 140 x 55 mm Weight 0.88 kg
Cutting torch 341 P
Cutting depth up to 300 mm Used gas: propane-butane, methane L = 1100 mm M16 x 1.5 / M16 x 1.5 LH Hoses ø6 mm and ø9 mm Standard GOST 2 tips No. 1, 4
Cutting torch 374 P
Cutting depth 3 - 300 mm Used gas: acetylene, propane-butane, methane 1 tip No. 3 L = 540 mm M16 x 1.5 / M16 x 1.5LH Hoses ø 6 mm and ø 9 mm Standard GOST
Electrode holder for MMA-200FI / MMA-250FI / MIG-250MI. Spare part
Electrode holder supplied as a spare part for YOULI welding machines. It holds the electrode securely and delivers the welding current to it during manual arc welding with coated electrodes (MMA).Brand: YOULICompatibility: MMA-200FI, MMA-250FI, MIG-250MIType: spare part
Electrode holder handle 800A
Electrode holder rated at 800 A, designed for clamping and holding electrodes during stick (MMA) welding. Also suitable for replacing a worn or damaged electrode holder on a welding cable.Brand: CHANGLU TOOLSCurrent: 800 A
Electrode holder with cable for MMA-200FI / MMA-250FI / MIG-250M
2 m (16 mm2) 200 Amp
Ethine hose Φ8X28m
The rubber hose is treated with a special formula, which has strong flexibility and is resistant to high temperature and severe cold Working pressure: 2.0MPa, Burst pressure: 6.0MPa
Folding welding table
Dimensions 66 x 59 x 83 cm Folding welding table, perfect for mobile renovation, construction and service works The design enables the attachment of additional tables in order to obtain a larger work surface The table top has retractable edge guides for use as limiters or for fixing workpieces Material steel frame, steel plate top Substructure finish black powder coating The surface of the steel worktop is galvanized and anti-rust Has an adjustable angle of inclination Plates with five stops and two clamping screws Load capacity 150 kg
Gas blow torch KEMPER 1300°C 360° with gas 580S MINI 60g
The temperature is maintained at 2100°C Working temperature 800°C Burner with automatic ignition The burner can be rotated 360° Power 0.9 kW The diameter of the burner nozzle is 20 mm With adjustable flame Suitable gas with external thread connection 7/16 Gas consumption 64 gr./h Autonomy when working in max mode 135 min Suitable for soft soldering Ready to use with MINI NOVACET PLUS gas, 580SMIN
Gas blow torch KEMPER 1900°C 7/16
The temperature is maintained at 1900°C Working temperature 750°C Burner without automatic ignition Power 1.75 kW The diameter of the burner nozzle is 20 mm With adjustable flame Suitable gas with external thread connection 7/16 Gas consumption 114 gr./h Autonomy when working in max mode 210 min Suitable for soft soldering
Gas blow torch piezo 1300°C
Gas burner with piezo fuel butane The maximum operating temperature reaches 1300º C Aluminum body with non-slip surface, capacity 30 ml, which allows you to work for 60 - 90 minutes
Gas blow torch piezo 1300°C 360°
Used gas: propane-butane Power 1.3 kW Gas consumption 90 g/h Autonomy in max mode 170 min Working temperature up to 650° C Maintained temperature 1800° C Adjustable burner flame power Can be used in any position (360°) Torch tip diameter 19 mm
Gas blow torch Specialist+ 1800°C with propane/butane gas 450g
Completed in a set with Specialist+ propane-butane gas Solid construction Adjustable power Maximum power 1.7 kW Gas consumption 123 g/h Combustion max. temperature 1800 °C Piezo electric ignition with one push of a button Gas description: 25 / 75% propane-butane gas mixture ensuring high activity and heat Works well at negative temperatures down to -20 °C Complies with EN 417 standard 7/16 European standard thread
Gas blow torch Specialist+ piezo 1300°C with Butan gas 2x227g
Used gas: propane-butane Power 1.30 kW Gas consumption 93 g/h Autonomy in max mode 190 min Working temperature up to 650° C Maintained temperature 1800° C Adjustable burner flame power Torch tip diameter 20 mm Powered by propane-butane gas from an external cylinder with EN417 connector In set included burner and 2 gas cylinders
Gas blow torch Specialist+ piezo 360° with Butan gas 227g
Used gas: propane-butane Power 1.03 kW Gas consumption 73 g/h Autonomy in max mode 190 min Working temperature up to 650° C Maintained temperature 1800° C Adjustable burner flame power Torch tip diameter 20 mm Thanks to the special construction, it can work in any position (360°) Powered by propane-butane gas from an external cylinder with EN417 connector
Gas cylinder for CO2 gas EMPTY 8L
Gas cylinder with a capacity of 8 liters is designed for filling with carbon dioxide It is used for welding in a protective atmosphere using MIG and MAG methods The solid cover protects the valve during transport and storage The compact size of the bottle makes it easy to handle during work Volume 8 l Maximum pressure 250 bar Thread W21.8 x 1/14"
Gas cylinder for CO2 gas EMPTY 8L
The gas cylinder with a capacity of 8 liters is intended for filling with the CO2 mixture It is used for welding in a protective atmosphere using MIG and MAG method A solid cover protects the valve during transport and storage The compact size makes it easy to handle while working Volume: 8 l Maximum pressure: 250 bar Max working pressure: 150 bar Thread W21.8 x 1/14"