Pneumatic equipment - compressors
L-type connector M. External thread 1/2" x 1/2"
An L-type (elbow) connector with external thread for compressed air systems. It is used to create an angled turn in an air line, for example when connecting quick couplers, hose tails or other fittings.Brand: OMG GHIOTTOShape: L-typeThread: external (M), 1/2" x 1/2"
L-type connector M. External thread 1/4" x 1/4"
L-type elbow connector with 1/4" male threads on both ends for compressed air systems. It allows an angled connection, for example when fitting quick couplers, hoses or air tools in tight spaces.Brand: OMG GHIOTTOType: L-typeThreads: 1/4" male (M) x 1/4" male (M)
L-type connector M. External thread 1/8" x 1/8"
L-type (elbow) connector with two 1/8" male threads. Designed for pneumatic lines and compressed air systems where a 90° turn is needed, for example at machines, tools or distribution points.Brand: OMG GHIOTTOShape: L-typeThreads: 1/8" male x 1/8" male
L-type connector M. External thread 3/8" x 3/8"
L-type (angle) connector with male threads on both ends, used to connect air lines, quick couplers and tools at an angle. It helps route hoses more conveniently and reduces kinking at the connection point.Brand: OMG GHIOTTOThread: male 3/8" x male 3/8" (M x M)Application: pneumatic systems
L-type quick push-in connector - 10 x 10 mm
L-type quick push-in connector with external thread - M. Ext. thr. 3/8" x 10mm
An L-type quick push-in connector with external thread, designed for connecting pneumatic tubing to equipment, valves and manifolds. The tube is simply pushed into the connector and is held in place without additional tools.Brand: OMG GHIOTTOShape: L-typeAvailable sizes: external thread 1/8" x 6mm, 1/8" x 8mm, 3/8" x 10mm, 3/8" x 12mm
Long reach air belt sander 10x600mm
The smallest handy belt sander but with extra length 600mm belt Easy belt replacement Suitable for jobs in narrow spaces and recessed corners Helps you to do fine sanding jobs like wood-working, furniture-polishing, plastic, aluminum & metal-polishing and even small spot sanding jobs like trims, curves and other difficult to reach spots for common sanding machines 3 different grit sanding belts (60,80,120 grit) included for different stage of sanding Rear exhaust No-load speed 16000 rpm Sanding pad 10 x 600 mm Average air consumption 170 l / min Working pressure 6.3 bar Length x Height 415 x 75 mm Weight 0.86 kg
Magnetic starter.Spare part - 11A, 5.5kW
Magnetic starter – a compressor spare part used to switch the compressor's electric motor on and off. Choose the version matching the motor power and current to replace a faulty or worn starter.Brand: MZBPart type: compressor spare partAvailable versions: 7 A, 3 kW; 9 A, 4 kW; 11 A, 5.5 kW; 15 A, 7.5 kW
MANNOL Compressor Oil ISO 46
Specials highly-purified paraffin ashless mineral compressor oil with an extended replacement age. It ensures a stable and continuous operation of the equipment throughout the entire operation period. Product properties: - It contains antifriction, antiwear, anti-scuffing, anti-oxidising, anticorrosion and antifoaming additives; - An excellent thermal stability; - Great antiwear and anti-scuffing properties; - An exceptional resistance to oxidisation and ageing; - A minimal formation of deposits and sediments of all types: it guarantees the cleanliness of all mechanical parts, prevents the risk of fire or explosion; - It has excellent anticorrosion, antiaerating and antifoaming properties and a low evaporation capacity; - It is recommended for use at ambient temperatures of -30 °С and up; - It has excellent cooling properties; - It is compatible with all sealing materials; - The replacement age is up to 2,000 running hours. Use: This oil is mostly meant for air screw compressors with an oil injection system, operating on easy and moderate modes. It is suitable for air piston-type (easy, moderate operating modes) and air rotary (easy, moderate operating modes) compressors with the outlet air temperature up to 220 °C where the oil with ISO VG 46 viscosity is required. It can be used in hydraulic systems as a low-ash oil and for the lubrication of a pneumatic tool. In order to properly use it, thoroughly read the user’s manual of the equipment. Capacity 1l Working temperature -30°C +210°C Viscosity 41.4-50.6mm²/s at 40°C Density ~0.882 g/ml (15°C) Specifications: ISO 46; ISO-L DAA/DAB/DAG/DAH; DIN 51506 VBL/VCL/VDL For air compressors, rotary compressors with oil injection, dry-running rotary compressors and centrifugal compressors
Manometer 0 - 10bar
Meets metrological requirements Connection 1/4" Manometer Ø 63 mm Sizes and units of manometer readings 0 - 10 bar
Manometer 0 - 12bar
A pressure gauge with a 0–12 bar measuring range for monitoring pressure in pneumatic systems. Suitable for fitting to air pressure regulators, filters and compressor air lines to keep track of the working pressure.Brand: OMG GHIOTTOMeasuring range: 0–12 bar
Manometer 0 - 12bar with hose 300mm
Gauge for pressure test With air discharge button
Metal flexible extension 210mm
Metal flexible extension, 210 mm long, for blow guns and sprayers. The flexible tube lets you direct airflow into hard-to-reach areas, for example when cleaning machinery, engine bays or recesses in parts.Material: metalLength: 210 mmDesign: flexible
Metal sandblaster nozzle and clamping ring
M32x1.5 For sandblaster SB01A, SB01, SB04
Mini air angle sander 2", 50mm
Velcro backing pad Pad size 50mm Free speed 15000 RPM Air inlet (PT)1/4", Air hose (ID) 3/8” Exhaust - rear, adjustable 360° Adjustable 4 speed regulator Average air consumption 113.27 l/min Working pressure 6.3bar
Mini air blow gun with safety tip
With thumb-operated trigger button For many applications in automotive and other areas hanging ring air inlet: 6.3 mm (1/4") Technical data Weight 90 g Max. working pressure 6.3 bar (90 psi)
Mini air orbital polisher 75mm kit
Velcro backing pad Pad size 75mm Free speed 15000 RPM Air inlet (PT)1/4", Air hose (ID) 3/8” Exhaust - rear Average air consumption 113.27 l/min Orbit diameter 3 mm Working pressure 6.3bar Spindle M6 x 1.0 thread The kit includes: two polishing sponges (white and yellow), wool polishing pad, spindle lock pin
Motor for compressor. Spare part - 3KW for compressor W-0.36/8
Electric motor – spare part for MZB compressors. Used to replace a damaged or worn compressor motor; before choosing, check the compressor model, motor power and supply voltage.Brand: MZBAvailable versions: 2.2 kW (for compressors V-0.25/8, VA-70, VA-65); 3 kW (for compressor W-0.36/8); 7.5 kW (for compressor 4V-1.05/12); 7.5 kW (for compressors W-0.9/8, W-0.9/12.5); 220 V; 380 V
Non-return valve for compressor. Spare part - For compressor BM & FL
Non-return (check) valve for compressors, letting compressed air flow only into the tank and preventing it from returning to the compressor head. This spare part replaces a worn or damaged valve.Brand: MZBType: spare partAvailable for compressors: BM and FL, V-0.25, V-0.6, W-0.36, W-0.9, 4V-1.05, MZB-550H, MZB-1200H-24, MZB-1200H-50/90
Oil & water separator 1/4"
Size 1/4" Working pressure 2 - 5bar Max pressure 8 bar
