Metal forming tools
Surface preparation kit (7pcs) 2" 50mm with shank 1/4"
Can be used with die grinders or drills on a variety of surfaces to remove rust, corrosion, gasket material, scratches, polishing and deburring Threaded pad backs screw tightly onto the mandrel and allows for quick and easy changes 1 pcs. - stripping wheel 1 pcs. - sanding disc 1 pcs. - flap disc 1 pcs. - 1/4" shank mandrel 1 pcs. - felt wheel 1 pcs. - stripping disc 1 pcs. - backing pad
Tap adapters set 1/4", 3/8" (10pcs)
Set of 10 sockets on a steel rail Material: CRV Sizes: 1/4" #1(2.7 mm), #2(3 mm), #3(4 mm), #3.5(4.5 mm), #4(4.5 mm), #4.5(5 mm) 3/8" #5(6 mm), #6(7 mm), #7 (7.5 mm), #8(8.5 mm) Inside the caps a magnet holding the tap For use with a ratchet or knob
Tap and die holder set 5pcs
Comfortable ratcheting T-handle with a 5˚ swing arc eliminates hand-over-hand turning for faster cutting Flip the simple reversing lever to change ratcheting direction for maximum performance Patented twist lock guide system reduces the “walk back” of the die guide to keep dies centered when cutting Handle’s design locks tap adaptors in place while still allowing for safe, effortless removal 5-piece set works with round or hex-shaped dies and comes packed in a blow molded plastic storage and carrying case
Tap wrench with ratchet - M5 - M12
Tap wrench with a ratchet for cutting internal threads with hand taps. The ratchet lets you cut threads in tight spaces without repositioning the wrench after each turn. Suitable for M5–M12 taps in the workshop, garage and repair work, including restoring damaged threads.Range: M5–M12Mechanism: ratchet
Tap wrench with ratchet. Long - M5 - M12
Long ratcheting tap wrench for holding taps and cutting internal threads by hand. The ratchet allows work in confined spaces without repositioning the wrench after every turn. The long design provides greater leverage.Type: ratcheting, longAvailable sizes: M5 – M12
Taper pipe tap P6M5 - K1/4"
Taper pipe tap for cutting internal tapered pipe threads, for example in bores for pipework, pneumatic and hydraulic fittings. Use it with a suitable tap wrench.Steel grade: P6M5Thread type: taper pipe threadAvailable sizes: K1/8", K1/4", K3/8", K1/2"
Taper shank twist drill HSS DIN345 - 22.0mm
Twist drill with taper shank. Point angle 118° Material HSS speed steel. Bright tin finish For alloy material, stainless steel up to tensile strength 800 N/mm² , and other medium duty applications
Taps and dies set 110pcs. M2-M18
Alloy tool steel 70 pcs. Taps # 1 and # 2 of each size: M2 x 0.4, M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 0.75, M6 x 1, M7 x 0..75, M7 x 1, M8 x 0.75, M8 x 1, M8 x 1.25, M9 x 0.75, M9 x 1, M9x 1.25, M10 x 0.75, M10 x 1, M10 x 1.25, M10 x 1.5 M11 x 0.75, M11 x 1, M11 x 1.25, M11 x 1.5, M12 x 0.75, M12 x 1, M12 x 1.25, M12 x 1.5, M12 x 1.75 M14 x 1, M14 x 1.25, M14 x 1.5, M14 x 2, M16 x 1, M16 x 1.5, M16 x 2, M18 x 1.5 35 pcs. Dies the same size as taps 2 pcs. Dies stock 2 pcs. Tap wrench 1 pcs. T-type wrench Package size 435 x 330 x 55 mm
Taps and dies set 20pcs. M3-M12
Alloy tool steel 9 pcs. Taps M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1.0, M7 x 1.0, M8 x 1.25, M9 x 1.25, M10 x 1.5, M12 x 1.75 9 pcs. Dies the same size as taps 1 pcs. Dies stock 1 pcs. Tap wrench Plastic box
Taps and dies set 24pcs. M5-M12
Alloy steel 11 pcs. Taps M5 x 0.8, M5 x 0.9, M6 x 0.75, M6 x 1.0, M8 x 1.0, M8 x 1.25, M10 x 1.25, M10 x 1.5, M12 x 1.5, M12 x 1.75, G1/8" 11 pcs. Dies the same size as taps 1 pcs. Dies stock 1 pcs. Tap wrench Metal case
Taps and dies set 32pcs. M3-M12
Alloy steel 7x3 pcs. Coarse, middle and fine taps DIN352 M3, M4, M5, M6, M8, M10, M12 7 pcs. Dies DIN223 M3, M4, M5, M6, M8, M10, M12 1 pcs. Dies stock 1 pcs. Tap wrench 1 pcs. Screw driver 1 pcs. Screw pitch gauge Metal case
Taps and dies set 40pcs. M3-M12
Alloy steel 17 pcs. Taps M3 x 0.5, M3 x 0.6, M4 x 0.7, M4 x 0.75, M5 x 0.8, M5 x 0.9, M6 x 0.75, M6 x 1.0, M7 x 0.75, M7 x 1.0, M8 x 1.0, M8 x 1.25, M10 x 1.25, M10 x 1.5, M12 x 1.5, M12 x 1.75, G1/8" 17 pcs. Dies the same size as taps 1 pcs. Die holder 1 pcs. Tap wrench 1 pcs. Ratchet tap wrench 1 pcs. Screw driver 1 pcs. Screw pitch gauge
Taps and dies set 60pcs M3-M12, SAE
10 pcs. Metric Taps: 3x0.5, 4x0.7, 5x0.8, 6x1.0, 7x1.0, 8x1.25, 9x1.25, 10x1.0, 10x1.5, 12x1.75 10 pcs. UNC Taps: 4-40, 6-32, 8-32, 10-24, 12-24, 1/4, 5/16, 3/8, 7/16, 1/2 6 pcs. UNF Taps: 10-32, 1/4, 5/16, 3/8, 7/16, 1/2 10 pcs. Metric Dies: 3x0.5, 4x0.7, 5x0.8, 6x1.0,7x1.0, 8x1.25, 9x1.25, 10x1.0, 10x1.5,12x1.75 10 pcs. UNC Dies: 4-40, 6-32, 8-32, 10-24, 12-24, 1/4, 5/16, 3/8, 7/16, 1/2 6 pcs. UNF Dies: 10-32, 1/4, 5/16, 3/8, 7/16, 1/2 1 pcs. NPT Tap: 1/8-27 1 pcs. NPT Die: 1/8-27 1 pcs. Tap wrench: M4 - M12(3/16 - 1/2") 1 pcs. T-Type Tap wrench:M3 - M16(1/16 - 1/4") 1 pcs. Die wrench: 25 mm 1" O/D 1 pcs. Screwdriver 1 pcs. Metric Screw Pitch Gauge 1 pcs. Inch Screw Pitch Gauge
Thread repair set - M5x0.8 (25pcs)
Drill, tap, holder 2 pcs and helicole type thread inserts are included in the set
Thread repair set 131pcs. (M5-M12)
Taps M5 x 0.8, M6 x 1.0, M8 x 1.25, M10 x 1.5, M12 x 1.75 Twist drills 5.2, 6.3, 8.3, 10.5, 12.3 mm HSS4341
Thread repair set 88pcs. (M6-M10)
Taps M6 x 1.0, M8 x 1.25, M10 x 1.25 Twist drills 6.3, 8.3, 10.5 mm HSS4341
Three point wood drill bits HCS 25pcs, 1-13mm
Three point wood drill bit set 25pcs, from 1.0 to 13.0 mm, drill sizes every 0.5 mm 25-piece Three point wood drill bit set (1.0–13.0 mm, every 0.5 mm). Made of high-quality material, these drill bits ensure precise and clean drilling in various types of wood. Ideal for both hobbyists and professionals. Convenient case helps maintain order and ensures convenient transportation. Drill sizes in the kit: 1.0 mm – 1.5 mm – 2.0 mm – 2.5 mm – 3.0 mm – 3.5 mm – 4.0 mm – 4.5 mm – 5.0 mm – 5.5 mm – 6.0 mm – 6.5 mm – 7.0 mm – 7.5 mm – 8.0 mm – 8.5 mm – 9.0 mm – 9.5 mm – 10.0 mm – 10.5 mm – 11.0 mm – 11.5 mm – 12.0 mm – 12.5 mm – 13.0 mm.
Tube crimped wire brush with shaft - Ø 20mm
Dimensions: 65 x 200 mm Shaft diameter: 8 mm Bristle material: stainless steel Handle material: steel
Twist drill HSS Cobalt DIN338 - 4.1mm
Twist drill with parallel shank. Point angle 135° Drills are made of high quality HSS steel, containing 5% of cobalt (Co) For alloy material, stainless steel which tensile strength 800-1100N/mm²
Twist drill HSS DIN338 - 4.0mm
Twist drill with parallel shank. Point angle 135° Material HSS speed steel. Bright TiN finish For alloy material, stainless steel up to tensile strength 800 N/mm² , and other medium duty applications Min order quantity 10pcs. (1.0mm - 9.5mm twist drill) Min order quantity 5pcs. (10.0mm - 20.0mm twist drill)
Twist drill long HSS DIN340 - 7.0mm
Twist drill with parallel shank. Point angle 135° Material HSS speed steel. Bright TiN finish For alloy material, stainless steel up to tensile strength 800 N/mm² , and other medium duty applications Min order quantity 10pcs. (1.0mm - 7.5mm twist drill) Min order quantity 5pcs. (8.0mm - 13.0mm twist drill)
Twist drill set DIN338 1/4'' 13pcs 1.5-6.5mm Cobalt
Sizes: 1.5, 2, 2.5, 3, 3.2, 3.5, 4, 4.5, 4.8, 5, 5.5, 6, 6.5 mm High-speed steel (HSS) drill bits made by double grinding, which significantly increases the precision and life of the drill Material HSS steel, containing 5% of cobalt (Co) Packing - Plastic box
Twist drill set DIN338 170pcs. (1-10mm)
Size 1.0-8.0 x 0.5mm x 10pcs + 8.5-10.0 x 0.5mm x 5pcs. Edge ground Material HSS steel Packing - Metal box