Hand tools
Cutter for plastic pipes KNIPEX
Article No:. 90 20 185 EAN: 4003773067122 Body of the tool made from shock-resistant, glass reinforced plastic Trapezoidal blade penetrates the centre of the material and cuts two cut edges Blades are made of special tool steel, oil-hardened Handles glass fibre reinforced plastic handles Opening spring and locking lever Pipe cutter for cutting thin walled plastic pipes (armoured pipes) and hoses made of soft plastics and rubber (also fabric reinforced) up to an outer diameter of 25 mm Not suitable for cutting cables Cutting edge length Ø 25 mm Dimensions 185 x 70 x 25 mm Weight 172 g
Cutter wheels for tubing cutter 2pcs
For cutting copper, aluminum, brass and thin wall tubing Tempered steel offers strength and durability for long-lasting performance Black oxide finish to resist corrosion Blade for ST97303ST
Cutter wheels for tubing cutter 2pcs 3x18mm
For cutting copper, aluminum, brass and thin wall tubing Tempered steel offers strength and durability for long-lasting performance Black oxide finish to resist corrosion Blade for ST97301ST ST97302ST ST97305ST
Cutting pliers (pointed) - L=150mm
For cutting plastic / vinyl coated cable The plier body is forged from high-quality Cr-V steel The jaws of the pliers are equipped with springs, making them easy and quick to use The pliers are pointed, making them easy to operate in narrow spaces
CV boot clamp pliers
Application range: Axle boots for Audi, Bmw, Chrysler, Ford, GM, Honda, Mazda, Mercedes Benz, Nissan, Opel, Porsche, VW and others Suitable working with earless clamps, thermoplastic axle boots, for example Oetiker 168, up to 100 mm Length 260 mm
Dead blow hammer with fiberglass handle - 5.5kg, L=900mm
Heavy Sharpless Hammer - with a special design causing dampening and minimizing the recoil produced during impact . Head filled with steel shot and covered with a thick layer of flexible plastic, permanently connected with a strong shaft Handle covered with an anti-slip sheath for a secure and safe grip Shank made of damage-resistant fiberglass-based material Unique design means that even the strongest impact does not generate a rebound and does not damage materials, such as curbs, stone building elements Hammers of this type, depending on the weight, are used in industry, transportation, construction, installation and paving work. Even the strongest impact does not generate a rebound and does not damage the material, for example, curbs or stone building elements. Heavy rubber recoilless hammers are used when changing tires on trucks and large construction machinery are standard equipment for tire service shops. A specific increasingly popular use of heavy recoilless hammers is in sports training so-called CROSS FIT. Item code: YT-46270 / YT-46273 Head dimensions: 70x70x140 mm / 105x105x180 mm Length: 490 mm / 900 mm Weight: 2400 g / 5500 g Material of hammer face: ABS, steel shot Grip material: fiberglass, TPR
Deburring and chamfer tool 5-38mm
Plastic shell and spring steel blade, this handle reamer is used to deburr the inside and outside of the pipe Widely used in PVC, PPR, copper tube, brass, aluminum tube with diameter of 5-38mm Size 5 - 38 mm (3/16" - 1-1/2") Dimensions 45 x 40 x 40 mm
Deburring tool
The deburrer is designed for machining copper, steel, aluminum, brass, cast iron and plastic pipes Blade made of HSS M2 steel Rotary blade with a standard mounting bracket Pocket catch holder
Deburring tool
The deburrer is designed for machining copper, steel, aluminum, brass, cast iron and plastic pipes Deburring tool with replaceable blade made of HSS steel Rotary blade with a standard mounting bracket Pocket catch holder
Deburring tool with 5 blades
The deburrer is designed for machining copper, steel, aluminum, brass, cast iron and plastic pipes Deburring tool with replaceable blade made of HSS M2 steel Rotary blade with a standard mounting bracket
Decollation nut separator 5pcs
#0: 2 - 3 mm #1: 3 - 5 mm #2: 4 - 8 mm #3: 5 - 10 mm #4: 6 - 12 mm
Decollation nut separator 8pcs
These extractors will remove most kinds of damaged, stripped, rusted, broken, or stuck screws from any wood or metal surface with relative ease Reverse thread bits easily remove screws, bolts, studs, and threaded pipe fittings 1# - M3 – M6, L = 52 mm 2# - M6 – M8, L = 57 mm 3# - M8 – M11, L = 66 mm 4# - M11 – M14 L = 75 mm 5# - M14 – M18, L = 82 mm 6# - M18 – M25, L = 91 mm 7# - M25 – M35, L = 96 mm 8# - M35 – M50, L = 103 mm
Deep offset double box end wrench - 27 x 30mm
Double box end wrench design with 2 sizes per wrench 40° offset double box end design provides better access to recessed fasteners Off-corner loading design on box ends provide better grip and reduces fastener rounding Sleek head design enables access to tight spots where a ratchet will not fit High-visibility stamped markings provide quick size identification Bright, full polish chrome finish easily wipes clean and resists corrosion Chrome vanadium alloy steel (Cr-V) for exceptional strength and durability Meets or exceeds ASME B107.100
Deep offset double box end wrench (S.A.E.) - 15/16"x1"
Double box end wrench design with 2 sizes per wrench 40° offset double box end design provides better access to recessed fasteners Off-corner loading design on box ends provide better grip and reduces fastener rounding Sleek head design enables access to tight spots where a ratchet will not fit High-visibility stamped markings provide quick size identification Bright, full polish chrome finish easily wipes clean and resists corrosion Chrome vanadium alloy steel (Cr-V) for exceptional strength and durability Meets or exceeds ASME B107.100
Deep offset double box end wrench set 6pcs (8-21mm)
40 CRV surface treatment mirror finish 8 x 10 mm, L= 237 mm 11 x 13 mm, L= 332 mm 12 x 14 mm, L= 332 mm 15 x 17 mm, L= 411 mm 16 x 18 mm, L= 414 mm 19 x 21 mm, L= 422 mm
Deep ofset double box end wrench set 11pcs. (6-32)
6x7, 8x9, 10x11, 12x13, 14x15, 16x17, 18x19, 20x22, 21x23, 24x27, 30x32 mm 70° offset on box end to reach recessed fasteners Surface mirror polished
Diagonal cutting nippers 160mm
Article No: 72 21 160 EAN: 4003773046820 Cutting face flush For nearly flush cutting of moulded plastic components from sprues Cuts soft materials such as lead in a flush cut With opening spring Dimensions 160 x 76 x 14 mm Weight 165 g Diagonal cutters for plastic and other soft materials Why special diagonal cutters are needed for plastic Diagonal cutters for wire have bevels on the cutting edges, producing a wedge-shaped cut towards the centre of the cut product. The wire ends then have wedge-shaped cut surfaces. A flush, smooth cut is desired when separating moulded parts and sprues, however, which creates the least finishing work when deburring. The cutting edges of the Knipex 72 21 160 diagonal cutters have no bevel towards the component, but are surface ground. For this reason, the sprue is cut off directly on the moulded part. The cutting edge runs parallel to the component. Cutting edges at a 90° angle for deburring in poorly accessible areas Due to their cutting faces at an angle of 90°, the Knipex 72 21 160 diagonal cutters are suitable for work perpendicular to the component. This approach is necessary when access from the side is not possible, as with angled plastic mould parts or machine components. Plastic parts are separated cleanly and flush from sprue after demoulding by the surface ground cutting faces. Plastic injection moulds are separated; sprue residues are removed even from areas that are hard to reach. With opening spring to relieve strain on the user – compact and stable In many cases, work steps in plastic injection moulding and production processes repeat. Users who frequently separate sprues from moulded parts therefore appreciate the opening spring on the 72 21 160, which saves one hand movement during each cutting operation The Knipex diagonal cutters for plastic have been designed for many years of work in plastic injection moulding and other industrial areas. We forge them from vanadium electric steel. Warming them and then quenching them in oil gives them their high strength.
Diagonal cutting pliers - L=175mm
HRC 56-62 Cutting wire: Copper Ø2.6 mm; Iron Ø2.4 mm; Steel Ø2.0 mm Cr-Ni Steel
Diagonal cutting pliers 125mm KNIPEX
Article No.: 70 01 125 EAN: 4003773013402 Narrow head style for use in confined areas The indispensable diagonal cutter for all-round use High-quality material and precise workmanship for long service life Precision cutting edges for soft and hard wire Clean cutting of thin copper wires, also at the cutting edge tips Cutting edges additionally induction-hardened, cutting edge hardness approx. 62 HRC Cutting capacities medium hard wire (diameter) Cutting capacities medium hard wire Ø 2.3 mm Cutting values for hard wire Ø 1.5 mm Pliers black atramentized Head polished Handles plastic coated Standard DIN ISO 5749 Dimensions 125 x 50 x 13 mm Weight 80 g
Diagonal cutting pliers 140mm
Article No.: 70 01 140 EAN: 4003773013419 Optimised power transmission for 20 % higher cutting performance than the previous model The indispensable diagonal cutter for all-round use High-quality material and precise workmanship for long service life Precision cutting edges for soft and hard wire Clean cutting of thin copper wires, also at the cutting edge tips Cutting edges additionally induction-hardened, cutting edge hardness approx. 62 HRC Narrow head style for use in confined areas Cutting capacities soft wire (diameter) Cutting capacities soft wire Ø 4.0 mm Cutting capacities medium hard wire (diameter) Cutting capacities medium hard wire Ø 2.5 mm Cutting values for hard wire Ø 1.8 mm Pliers black atramentized Head polished Handles plastic coated Standard DIN ISO 5749 Dimensions 140 x 50 x 13 mm Weight 126 g
Diagonal cutting pliers 150mm
6", L = 150 mm Ergonomically designed two-colour durable non-slip handle High quality alloy steel