Fluid oil exchange. Lubrication
Oil drain pan & recycling container 6l
Purpose made for recovery of oil and anti-freeze Capacity 6 l Dimension 440 x 290 x 130 mm
Oil drain pan for motorcycle (plastic) 2.5l
Plastic oil drain pan for motorcycles, used to collect used oil during an oil change. Its compact size lets it fit under a motorcycle engine where space is limited and helps keep the work area clean.Brand: ELLIENT TOOLSMaterial: plasticCapacity: 2.5 l
Oil drum drain pan 20l
Designed to collect unused oil into a 200L (55 Gallon) drum The drain pan sit on top of drum perfectly Built-in filter grids of draining mouth fits into the bung hole to collect unused oil into the oil drum Capacity: 20 L Diameter: 600 mm Heigh: 150 mm Weight: 1.7 kg
Oil extractor pump 12V
Voltage 12 V Ratted current: approx. 5A Diesel or Heating Oi flow rate: 1.5 L/min Motor oil (40-60oC) flow rate : 0.2L/min Maximum Suction lift height: 70 cm Sound pressure level: 70dB(A) Vibration: < 2.5m/s2
Oil jug with long flexible neck - 5l
Gradated SAE and Metric Capacity scale Does not absorb odors or flavors Operating temperature -40° ~ +99° C
Oil jug with long flexible neck - 3l
Gradated SAE and Metric Capacity scale Does not absorb odors or flavors Operating temperature -40° ~ +99° C
Oil nozzle 1/2"
The gun tip is designed to prevent oil or grease from leaking, small size, easy operation. Filling nozzle Ø14 mm, L= 47 mm Connection BSPF 1/2" Max throughput 35 l/min Max working pressure 100 bar Accuracy ±0.3%
Oil pan 10l for transmission jack TEL05004S
Oil pan supplied as an accessory for the TONGRUN TEL05004S transmission jack. It collects oil when removing a gearbox or other units, keeping oil off the workshop floor.Brand: TONGRUNCapacity: 10 lCompatibility: TEL05004S transmission jack
Oil pump 220V
For use with oil and various lubricants Viscosity ≤30 (SAE 5W, 250) Rated power 750 W Flow rate 5-14 l/min Outlet BSPF 3/4" (26.44 mm) Suction hose length 6 m Max pressure 12 bar / 175 psi Speed 1000 r/min Accuracy ±10% Duty cycle up to 30 minutes Working time is up to 3 minutes when oil isn't pumped
Oil pump with wheels 16l
Oil pump with a 16 l tank and wheels, designed for filling oil into vehicle and machinery units in garages and workshops. The wheels make it easy to move the pump around the work area and bring oil right to the vehicle.Tank capacity: 16 lMobility: on wheelsApplication: oil dispensing
Oil pump with wheels 30l
Capacity 30 l Hose Ø 8 x 12 mm Gun L = 130 mm Dimensions 370 x 355 x 920 mm Weight 13.5 kg
Oil/fluid drain pan 24l (plastic)
For recovery of oil and antifreeze, these pans keep the workshop floor free from oily residue and aid return of oil to recycling containers with minimum risk of spills or splashes Suitable for parts cleaning operations with emulsifiable solvents Helps prevent overflow or spillage Capacity: 24 l Dimension: 820 x 540 x 20 mm
Pneumatic grease pump 12kg
Barrel size 12kg Hose 6m x Ø6 mm Pressure ratio 50:1 Transmission pressure 30-40 MPa Air pressure 0.6 -0.8 MPa Flow rate 0.85 l/min Gun 40 MPa Weight 16.5 kg Package size 320 x 350 x 850 mm
Pneumatic grease pump 50:1
50:1 grease pump Hose 6 m x Ø 6 mm Air pressure 0.6 - 0.8 MPa Transmission pressure 30 - 40 MPa Drum cover 325 mm Follower plate 280 mm Air cylinder Ø 70 mm Flow rate 0 - 0.85 l/min Weight 16.0 kg Package sizes 470 x 480 x 210 mm & 830 x 210 x 150 mm
Pneumatic grease pump dispencer, capacity 30kg
HG-68030A Pneumatic Grease Dispenser, with 30L drum, features good reliability, low air consumption, accurate working pressure, can be widely used in gas stations, the working line, papermaking, electricity, electronic, port, construction machine, and automobiles. Barrel size 30 kg Hose 4m x Ø14 mm Pressure ratio 50:1 Transmission pressure 25 MPa Air pressure 0.5 -0.8 MPa Flow rate ~0.80 g/min Weight 14 kg Package size 370 x 370 x 740 mm
Pneumatic mobile oil pump unit 3:1
Suitable for drum 180 – 200 kg 3:1 oil pump (30 l/min) Operating air pressure 3 - 8 bar Max continuous duty flow rate 14 - 18 l/min (with 4 m hose and oil meter pistol) Max fluid pressure 24 bar Diameter of suction tube Ø 34 mm Length of suction tube 940 mm Digital oil meter control valve with flexible hose, auto tip Precision ± 0.2 % Working pressure 3 – 70 bar Input/out 1/2" Inner diameter Ø10 mm Power supply DC 3V 1/2" x 4 m Connection hose Package sizes 1320 x 110 x 120 mm & 800 x 660 x 140 mm & 330 x 145 x 115 mm
Pneumatic oil pump 1:1 without meter
1:1 oil pump Operating air pressure 3 - 8 bar Max fluid pressure 8 bar Max continuous duty flow rate 15 - 60 l/min Diameter of suction tube Ø 49 mm Length of suction tube 940 mm Oil outlet connections 1/2" Weight 7 kg Package size 1320 x 110 x 132 mm
Pneumatic waste oil extractor 70l
Tank capacity 70l Air inlet pressure 6-8bar Working pressure 0.7-1.0bar Min height 1100mm Max height 1680mm Weight 17kg Package size 470 x 440 x 940 mm
Pneumatic waste oil extractor 80l
Total volume 80 l Oil tray volume 20 l Air inlet pressure 6 - 8 bar Ejection pressure 0.6 - 0.8 bar Air consumption 150 l/min Extraction hose L = 1.5 m Oil temperature range 40 - 60° C Weight 25.0 kg Suction probes: 1 pcs. PVC Ø 5 mm L = 700 mm (suction speed 1.4 l/min) 1 pcs. PVC Ø 6 mm L = 700 mm (suction speed 2.8 l/min) 2 pcs. PVC Ø 7 mm L = 1000 mm (suction speed 3.2 l/min) 1 pcs. PVC Ø 8 mm L = 700 mm (suction speed 5.0 l/min) Package size 470 x 440 x 940 mm
Pneumatic waste oil extractor 90l
Total volume 90l Cylinder volume 9l Oil tray volume 16l Air inlet pressure 6-8bar Ejection pressure 0.6-0.8bar Min height 1100mm Max height 1680mm Air consumption 150l/min Extraction hose L=1.5m Oil temperature range 40-60°C Weight 21.3kg Package sizes 470 x 440 x 940 mm & 270 x 270 x 575 mm Suction probes: 1 pcs. PVC Ø 5 mm L = 700 mm (suction speed 1.4 l/min) 1 pcs. PVC Ø 6 mm L = 700 mm (suction speed 2.8 l/min) 2 pcs. PVC Ø 7 mm L = 1000 mm (suction speed 3.2 l/min) 1 pcs. PVC Ø 8 mm L = 700 mm (suction speed 5.0 l/min)
Pneumatic waste oil extractor, 105l
Total volume 105l Cylinder volume 9l Oil tray volume 16l Air inlet pressure 6-8bar Ejection pressure 0.7-1.0bar Min height 1460mm Max height 1705mm Air consumption 200l/min Extraction hose L=2.5m Oil temperature range 40-60°C Weight 26.1kg Package size 560 x 440 x 1000 mm Suction probes: 1 pcs. PVC Ø 5 mm L = 700 mm (suction speed 1.4 l/min) 1 pcs. PVC Ø 6 mm L = 700 mm (suction speed 2.8 l/min) 2 pcs. PVC Ø 7 mm L = 1000 mm (suction speed 3.2 l/min) 1 pcs. PVC Ø 8 mm L = 700 mm (suction speed 5.0 l/min)
Portable Adblue transfer tank 220L ADTK240 with 12V pump (with hose, autumatic nozzle with filter, EU plug)
The mobile AdBlue tank is ideal for use on the farm or in the countryside and is also very popular for marina service. The tank is made of high-density polyethylene (HDPE), which gives the device resistance to corrosion and dents. Its design let's you easily transport and keep a large amount of fuel to places where vehicles cannot approach or have little access to. This fuel tank on wheels is designed for industrial, commercial and recreational use. It's a safe, fast and convenient way to top up power tools, lawn tractors, boat engines, generators, snowmobiles, ATVs and more. The pump ACAD40 works from a 12V battery or with a 230V power adapter For use with diesel and kerosene Rated power 150W Capacity 20 - 40 l/min Suction distance 5 m Lift height (vertical) 4 m Max pressure 3.5 bar Duty cycle up to 25 min Working time is up to 3 minutes when fuel isn't pumped No-load speed 4500 r.p.m. Speed 2900 r.p.m. Capacity: 220 liters (58 gallons) Material: HDPE (high density polyethylene) Dimensions: 920 x 620 x 690 mm Hose length: 4 m Weight: 34 kg (empty)
Portable AdBlue transfer tank 440L ADTK480 with 12V pump (with hose, autumatic nozzle with filter, EU plug)
The mobile AdBlue tank is ideal for use on the farm or in the countryside and is also very popular for marina service. The tank is made of high-density polyethylene (HDPE), which gives the device resistance to corrosion and dents. Its design let's you easily transport and keep a large amount of fuel to places where vehicles cannot approach or have little access to. This fuel tank on wheels is designed for industrial, commercial and recreational use. It's a safe, fast and convenient way to top up power tools, lawn tractors, boat engines, generators, snowmobiles, ATVs and more. The pump ACAD40 works from a 12V battery or with a 230V power adapter For use with diesel and kerosene Rated power 150W Capacity 20 - 40 l/min Suction distance 5 m Lift height (vertical) 10 m Max pressure 3.5 bar Duty cycle up to 25 min Working time is up to 3 minutes when fuel isn't pumped No-load speed 4500 r.p.m. Speed 2900 r.p.m. Capacity: 220 liters (58 gallons) Material: HDPE (high density polyethylene) Dimensions: 1200 x 800 x 800 mm Hose length: 4 m Weight: 62 kg (empty)
Portable diesel transfer tank 440L DTK480 with 12V pump (with hose, aut.nozzle with filter, EU plug)
The mobile fuel tank is ideal for use on the farm or in the countryside and is also very popular for marina service. The tank is made of high-density polyethylene (HDPE), which gives the device resistance to corrosion and dents. Its design let's you easily transport and keep a large amount of fuel to places where vehicles cannot approach or have little access to. This fuel tank on wheels is designed for industrial, commercial and recreational use. It's a safe, fast and convenient way to top up power tools, lawn tractors, boat engines, generators, snowmobiles, ATVs and more. The pump DCTP40 works from a 12V battery or with a 230V power adapter For use with diesel and kerosene Rated power 150W Capacity 20 - 40 l/min Suction distance 5 m Lift height (vertical) 10 m Max pressure 3 bar Duty cycle up to 25 min Working time is up to 3 minutes when fuel isn't pumped No-load speed 4500 r.p.m. Speed 3500 r.p.m. Capacity: 440 liters (116 gallons) Material: HDPE (High Density Polyethylene) Dimensions: 1200 x 800 x 800 mm Hose length: 4 m Weight: 62 kg (empty)