Soldering tools
Soldering tools
Hot staples for plastic welder guns DH50 and DHB100
A three-in-one multi-function gas hammer perfect for all professionals and DIY enthusiasts. 3 functions in one - soldering iron, heat gun, gas burner Soldering temperature up to 450°C Burner temperature up to 1300°C Replaceable soldering tips Convenient regulation of flame and gas pressure Popular inlet valve (standard lighter gas) Durable, precise nozzles are made of hardened steel. Capacity: 15 ml Power: 25-80W Gas: Butane / propane-butane Working time: 60 min Weight: 150 gr
The third-hand handle is an indispensable aid when soldering and desoldering small parts or electrical cables It will also work well when creating / repairing jewelry, watches, small electronics Thanks to the use of adjustment joints, we have many possibilities of adjusting the handle to the held element, and the solid cast iron base ensures the stability of the structure Magnification 2.5x Adjustment of the pliers setting Adjusting the angle of the magnifier Cast iron base
Hot staples for plastic welder guns DH50 and DHB100
Hot staples for plastic welder guns DH50 and DHB100
Output power 43 W Input current 0.2 A Output DC3V 25A Heating temperature 400° C Fast heating: the staples heat up in 1-3 seconds The kit can help you easily weld damaged and cracked plastic products and extend their service life Strong welding: The kit is suitable for strengthening and repairing plastic parts of cars and motorcycles, such as bumpers, dashboards, fenders, etc. It is also suitable for repairing various plastic products in daily life Safe and reliable: the welding machine has overload protection, fast heating and stable operation Stainless steel staples will not rust, and after repair, the parts will be strong and will not break easily Easy to use: button, one-click start, rubber handle is comfortable to hold and will not feel much fatigue after long time use An LED light is installed on the front of the plastic welding machine to facilitate repair work Accessories: The plastic repair kit includes 4 different welding staples (flat, wavy, inner corner and outer corner), side cutting pliers for staples, a knife with a replaceable blade and a carrying case This product has an overheat protection function, it will stop working after overheating and continue to work after cooling
Output power 50 W Input current 0.2 A Output DC3V 25A Heating temperature 400° C Fast heating: the staples heat up in 1-3 seconds The kit can help you easily weld damaged and cracked plastic products and extend their service life Strong welding: The kit is suitable for strengthening and repairing plastic parts of cars and motorcycles, such as bumpers, dashboards, fenders, etc. It is also suitable for repairing various plastic products in daily life Safe and reliable: the welding machine has overload protection, fast heating and stable operation Stainless steel staples will not rust, and after repair, the parts will be strong and will not break easily Easy to use: button, one-click start, rubber handle is comfortable to hold and will not feel much fatigue after long time use An LED light is installed on the front of the plastic welding machine to facilitate repair work Accessories: The plastic repair kit includes 4 different welding staples (flat, wavy, inner corner and outer corner), side cutting pliers for staples, a knife with a replaceable blade and a carrying case This product has an overheat protection function, it will stop working after overheating and continue to work after cooling
Output power 70 W Input current 0.32 A Output DC3V 65A Heating temperature 400° C Fast heating: the staples heat up in 1-3 seconds The kit can help you easily weld damaged and cracked plastic products and extend their service life Strong welding: The kit is suitable for strengthening and repairing plastic parts of cars and motorcycles, such as bumpers, dashboards, fenders, etc. It is also suitable for repairing various plastic products in daily life Safe and reliable: the welding machine has overload protection, fast heating and stable operation Stainless steel staples will not rust, and after repair, the parts will be strong and will not break easily Easy to use: button, one-click start, rubber handle is comfortable to hold and will not feel much fatigue after long time use An LED light is installed on the front of the plastic welding machine to facilitate repair work Accessories: The plastic repair kit includes 4 different welding staples (flat, wavy, inner corner and outer corner), side cutting pliers for staples, a knife with a replaceable blade and a carrying case This product has an overheat protection function, it will stop working after overheating and continue to work after cooling
Power: 80W max Temperature regulation: 220 - 480°C Supply voltage: AC 220-240V 50/60Hz Additional tips: 5 pcs Tip cleaning sponge Stand for soldering irons This product contains everything you need for soldering - tin, replaceable tips, tweezers and many other tools. Temperature reguliation - the device has a temperature control, high power will allow the flask to heat up quickly.
S-Sn97Cu3 (L-Sn97Cu3) DIN EN29453 Tin with 3% copper addition, used for soft soldering of copper or brass pipes and fittings in hot and cold water installations, as well as in central heating systems Melting point from 220 ° C to 310 ° C We recommend using pastes and fluxes for soft soldering Used for soft soldering of copper or brass pipes and fittings in hot and cold water installations, as well as in central heating systems
Soldering station with digital LED display, temperature control and stabilization and sleep function. The set includes a multifunctional housing with an end support, a place for a tin roll and a brass tip cleaner. The station supports a soldering iron with a built-in ceramic heater for the very popular 900M series interchangeable tips. Relatively high power combined with required soldering features and a hard flask with silicone, high temperature resistant power cord Power: 60W Temperature range: 90 - 480 ° C Temperature accuracy: + - 2 ° C Temperature stabilization Device sleep mode: 10 min ON/OFF button on the side A digital display with a blue LED backlight informs us about: The actual nozzle temperature is set The soldering iron is placed on the stainless steel handle. Heater operating voltage: ~ 230V Nozzle type: 900M Ceramic heater Outer diameter of the heater: 3.85 mm Cable length: 100 cm Weight: about 50 g The YT-82460 soldering station is manufactured using ESD-safe technology, which guarantees that no excessive electrostatic charge will accumulate on the housing. As a result, we limit the risk of damaging sensitive SMD circuits, for example. It heats up to an operating temperature of 350 ° C in about 30 seconds. The temperature stabilization function allows the set nozzle temperature to be maintained under various heat demand conditions for proper solder connection. Depending on the size of the soldered element and the soldering field, the nozzle emits more or less heat, and the appliance continuously reads and compares the actual value of the nozzle with a built-in nozzle temperature sensor, then increases or decreases energy consumption as required. to maintain the set value. temperatures. The best effect of this function is achieved by choosing a nozzle whose inner diameter is as close as possible to the diameter of the heater. We recommend nozzles with an inside diameter ranging from 4.0 to 4.5 mm The device's hibernation feature allows the station to enter standby mode, which automatically reduces the operating temperature to 200 ° C. This avoids unnecessary heating of the nozzle, which significantly extends its service life. The function activation time is set to 10 minutes at the factory on the YT-82460
Type 900M Outer diameter 6 mm Inner diameter 4.5 mm Coated soldering tips in the most popular shapes: 900M-T-I tip: sharp cone tip 900M-T-B tip: cone-type tip 900M-T-K tip: flat tip cut at an angle of 45 ° 900M-T-1.2D blade: flat tip resembling a screwdriver, 1.2 mm wide 900M-T-2.4D blade: a flat tip resembling a screwdriver, 2.4 mm wide 900M-T-3.2D blade: a flat tip resembling a screwdriver, 3.2 mm wide 900M-T-1C blade: round tip cut at an angle of 45 ° with a diameter of 1 mm 900M-T-2C blade: round tip cut at an angle of 45 ° with a diameter of 2 mm 900M-T-3C blade: round tip cut at an angle of 45 ° with a diameter of 3 mm
Type 900M Outer diameter 6 mm Inner diameter 4.5 mm Coated soldering tips in the most popular shapes: 900M-T-I tip: sharp cone tip 900M-T-B tip: cone-type tip 900M-T-K tip: flat tip cut at an angle of 45° 900M-T-2.4D blade: a flat tip resembling a screwdriver, 2.4 mm wide 900M-T-2C blade: round tip cut at an angle of 45 ° with a diameter of 2 mm 900M-T-3C blade: round tip cut at an angle of 45 ° with a diameter of 3 mm
Production standard GB / T 7157 High quality heating core The handle is resistant to high temperatures Fast heat dissipation Fast heat transfer - improves work efficiency
Voltage 230 V / 50 Hz Power input 60 W Max temperature of soldering tip 500 °C
Precise soldering iron with temperature-controlled buttons for the very popular 900M series interchangeable tips. The integrated LCD display shows the set and actual nozzle temperature and allows you to calibrate the temperature. Power: 80 W Warm-up time: ~ 20s to 350 ° C Maximum nozzle temperature: 480 ° C Temperature range: 50 - 480 ° C Temperature accuracy: + - 2 ° C Temperature stabilization Temperature calibration Ceramic heater Outer diameter of the heater: 3.85 mm ON / OFF button Cable length: 100 cm The soldering iron heats up to approx. 350 ° C in about 20 seconds The temperature stabilization function allows the set nozzle temperature to be maintained under various heat demand conditions for proper solder connection. Depending on the size of the soldered element and the soldering field, the nozzle emits more or less heat, and the appliance continuously reads and compares the actual value of the nozzle with a built-in nozzle temperature sensor, then increases or decreases energy consumption as required. to maintain the set value. temperatures. The best effect of this function is achieved by choosing a nozzle whose inner diameter is as close as possible to the diameter of the heater. We recommend nozzles with an inside diameter ranging from 4.0 to 4.5 mm The temperature calibration function allows you to recalibrate the built-in temperature sensor. Depending on the quality, size and degree of wear of the nozzle, the demanding user can calibrate the sensor with the help of a temperature measuring device. The correct reading not only has a positive effect on the temperature stabilization, but also helps the experienced user to avoid an error due to overheating of the PCB connection. To calibrate the temperature: briefly press the red button, then use the temperature control buttons to set the actual nozzle temperature and wait about 3 seconds for the setting to be confirmed. The temperature flashes on the display during the calibration process.
1pcs. Electric soldering gun 2pcs. Soldering tip 1pcs. Solder 1pcs. Solder paste Voltage 230 V/50 Hz Power input 100 W is enough to heat the tip from room temperature to approximately 350 °C Work type S2 20% 12s / 48s With lighting Weight 0.65kg Protection grade IPX2 CE conformity Packing - plastic box
Hot staples for plastic welder guns DH50 and DHB100
A universal tool for soldering plastic elements and tarpaulins The welder has the function of smooth regulation of the temperature of the blown air Very strong and durable heater, ceramic core It is most often used for welding elements such as: headlamps, bumpers, mirrors, heater housings, batteries, air conditioning devices, spoilers, gasoline, oil and water tanks as well as truck body parts The device is a suitable solution for soldering and desoldering (removing) electronic components, such as: SOIC, CHIP, QFP, PLCC, BGA Power supply 230V / 50Hz Output power 1000W Temperature range 40° - 550° C Airflow type blower Max air flow 230 L/min Dimensions ⌀100 x 330 mm, handle ⌀56 mm In the set included: plastic welder, 2 replaceable nozzles, spare brushes, mounting accessories Weight 1.1 kg
A plastic welder is a unique solution for everyone who cares about the effective connection of plastic elements Thanks to the smooth temperature control of the tip and the blown air as well as the smooth adjustment of the force, it allows you to adjust the parameters to your requirements Adjustment of the indicated elements is carried out with the use of knobs The device has been equipped with a system that allows automatic cooling after the end of work, such a solution significantly improves the life of the heater The LED display allows you to control the air temperature Application: plastic tank repairs, repairs of elements of ventilation systems, car body repairs Stock cooling system Solid and durable heater The universal size of the flask allows the use of all nozzles Smooth temperature control of hot air 100 - 450 C Max air flow 120l / min Air blower compressor - brushless fan Power supply 220V Device power 700W Dimensions 138 x 199 x 150 mm In the set included: 858D soldering station, round nozzles 4.4, 7 and 9 mm, BGA 12 x 12 mm nozzle
Binders for welding plastics with heat guns Dimensions: 2.5 x 5 mm Length 1 m Material: terpolymer (ABS) Processing temperature: 350 ° C Welding of containers, power tool housings, computer housings