Angle grinders. Cutters
Steel blade 150mm for reciprocating saw
For reciprocating saws RS07115 and CSSS20LI
Table saw 250mm 2000W
Rated voltage 220 - 240 V, 50/60 Hz Input power S1: 1800 W / S6 25%: 2000 W No load speed 5000 /min Cutting capacity 90° 85 mm / 45° 65 mm Main table size 640 x 486 x 28 mm Side table size 640 x 225 x 28 mm Rear table size 486 x 225 x 28 mm Height adjustment 0 - 85 mm Blade size Φ250 x Φ30x2.8 x 24T Saw blade thickness 2.8 mm Suction connection diameter 35 mm Cable length 5 m Insulation class II Dimensions 1126 x 936 x 900 mm Package dimensions 720 x 620 x 350 mm Weight 19 Kg
Thermal cutter for plastic / styrofoam 220W
The thermal cutter is used to cut parts made of polymers: polypropylene, PVC and styrofoam.The thermal cutter is equipped with a temperature setting potentiometer, ready-to-work light and a slider for adjusting the blade length. The device is simple to operate and handy Rated voltage 220 - 240 V, 50/60 Hz Rated power input 220 W Application: Polystyrene foam, PVC, PP Temperature control range: 1: ~70° C 2: ~150° C 3: ~260° C 4: ~390° C 5: ~450° C
Thermal cutter for plastic / styrofoam 220W
Knife for precision cutting of facade polystyrene, floor polystyrene and plastics. Hot cutting prevents polystyrene granules from being scattered on the building site and spread by the wind, as is the case when cutting with a panel saw. The unit has a short heat-up time and infinitely variable temperature control. It cuts polystyrene of various hardnesses (graphite, dalmatian, styrodur, floor, right up to polystyrene of hardness EPS 200 - used under the floor of garages). Cuts polypropylene ropes and braided synthetic fibre webbing without fraying. Power: 150 W Maximum cutting length: 200 millimeters Maximum operating temperature: 500 ˚C Weight: 400 g Set included: Knife, 150 mm blade, 200 mm blade, wire brush for cleaning
Thread adapter M14, 6mm
Adapter with M14 thread for attaching accessories - pads, attachments, grinding discs and polishing heads to a drill or straight grinders. Diameter: 6mm Length: 45mm
Tube belt sander 40x760mm 800W, 230V
The device is distinguished by high quality of workmanship, manufactured using the latest technology based on a proven design used for sanding various tubes or pipes Voltage 220 - 240 V Frequency 50 Hz Power 800 W Idle speed 900 rpm Second speed 2800 rpm Belt dimensions 760 x 40 mm (Grain 60) Package dimensions 630 x 495 x 350 mm Weight 19.4 kg
Tube belt sander spare part no. 53+54 Plastic roller installed set
Spare part no. 53 + 54 – a set with a pre-installed plastic roller for the BOKY MACHINE tube belt sander. Used to replace a worn or damaged roller assembly and restore the sander's correct operation.Brand: BOKY MACHINEPart numbers: 53, 54Includes: installed plastic rollerType: spare part
Wall and ceiling grinder with suction 215mm 900W 230V
The WORCRAFT DS09-215 wall sander is a versatile and practical tool for creating perfectly smooth walls and ceilings. Thanks to the 900W motor with metal gearbox, sanding walls, ceilings, removing wallpaper, paint and excess plaster is easy. The dust extraction system is equipped with a turbine, thanks to which the dust is collected in a special bag, this allows you to use the tool without connecting a vacuum cleaner. The powerful and efficient engine allows you to cope even with the processing of hard surfaces. Adjusting the rotation speed makes it possible to properly adjust the tool for various tasks. Bright 2-strip LED lighting with separate switching illuminates the work area well and helps to detect irregularities on the surface. The dust removal system into a special bag prevents dust from accumulating in the room and work surface, WITHOUT using a vacuum cleaner. Vacuum control valve , which allows you to adjust the force of pressing the grinding disc against the surface. Soft start ensures smooth and vibration-free start-up, and also helps to avoid premature wear of parts and components. High-quality Velcro allows you to easily install or replace sanding paper of any grit and ensures its secure fixation. The long length of the power cord and dust extraction hose significantly expands the working area. Comfortable work in any plane thanks to well-thought-out mechanisms for turning, balancing and fixing the position of the grinding machine head. A convenient telescopic pole that is easy to adjust to your height and the necessary tasks. The anti-slip handle provides comfortable control and secure fixation of the tool in the hands, preventing it from slipping. Excellent balancing and low weight significantly reduce the strain on the user's arms and back. Long-term work without fatigue , thanks to the power button lock function. The durable body made of high-quality ABS plastic prevents damage to internal elements during impact. An efficient cooling system removes heat from the engine, preventing overheating and extending its service life. Improved heat-resistant grease significantly reduces friction and heating temperature. The gear reducer gears are made of high-strength steel. Multi-layer coating of the armature and stator windings with heat-resistant varnish reliably protects the motor from construction dust and interturn short circuits. Quick replacement of carbon brushes , thanks to service covers on the housing, greatly simplifies tool maintenance. - Power 900 W - Rotation speed 800-1800 rpm - Grinding disc diameter 215 mm - Soft start function - Built-in dust extraction system - Telescopic rod - Bright LED lighting Equipment: WORCRAFT DS09-215 wall sander; sealing ring 2 pcs; flexible dust extraction hose; dust bag; bag for storage and transportation; hex key; sandpaper 2 pcs; packing box.
Wood blade 150mm for reciprocating saw
For reciprocating saws RS07115 and CSSS20LI