Electric, cordless power tools
Li-ion Cordless Chain Saw 40V CGC-S40LiBA Brake ring and sprocket Spare part
Brake ring and sprocket supplied as a spare part for the WORCRAFT CGC-S40LiBA 40 V Li-ion cordless chain saw. The parts are intended to replace worn or damaged components and restore correct operation of the saw.Brand: WORCRAFTCompatibility: CGC-S40LiBA chain saw, 40 VIncluded: brake ring and sprocketType: spare part
Li-ion Cordless Circular saw CCS-S20Li blade 16x165mm 36T
Circular saw blade – spare part for the WORCRAFT CCS-S20Li Li-ion cordless circular saw. Designed to replace a worn or damaged blade so the saw cuts cleanly and efficiently again.Brand: WORCRAFTCompatibility: CCS-S20LiSize: 16 x 165 mmNumber of teeth: 36
Li-ion Cordless Circular saw CMCS-S20LiB blade 9.5 x 115 mm 24T (spare part)
Cutting disc 9.5 x 115 mm 24T
Li-ion Cordless Circular saw CMCS-S20LiB blade 9.5 x 115 mm 36T (spare part)
Cutting disc 9.5 x 115 mm 36T
Li-ion Cordless Circular Saw with laser 20V
WORCRAFT CMCS-S20LiB cordless circular saw is a light and compact model with an ergonomic design for comfortable and accurate work even with one hand and in the most difficult-to-reach places The laser pointer of the cutting line, the side stop and the ability to accurately adjust the angle and depth of the cut ensure high accuracy of work when cutting wood, plastic, aluminum and other materials High productivity thanks to a powerful brushless motor in combination with a saw blade with a diameter of 115 mm The high speed of rotation of the disk (5000 rpm) ensures a fast and clean cut Stabilization of the speed of rotation of the saw blade allows you to maintain the speed of rotation of the saw blade even in case of increased load Basic parameters: - Rotation speed 5000 rpm - Disc diameter 115 mm - Depth of cut at 90°/45°: 42.8/28 mm - Laser pointer - Adjustment of inclination and depth of cut - Lightweight and a strong protective casing Set contains: 1x cordless circular saw CMCS-S20LiB; 1x saw blade for wood (Ø115 mm × Ø9.5 mm × 24 teeth); 1x parallel guide; 1x hex key. 1x 4.0Ah battery 1x battery charger
Li-ion Cordless COB(5W) light-USB adapter 20V
The WORCRAFT CUA-S20Li battery adapter is a multifunctional device designed for charging mobile phones, tablets and other devices from a battery from the ONE FOR ALL line. The device has an LED light for illumination, installed in 7 positions. In addition, the adapter can be used to charge WORCRAFT series batteries. Main parameters - Initial connectors • USB Type-C 5 V / 2.0 A • USB-A 5 V / 1.0 A - LED flashlight with a rotation angle of up to 180° - Luminous flux 400 Lm - Charging batteries of the WORCRAFT
Li-ion Cordless Driver / Drill 20V (XCUBE box)
The WORCRAFT XCUBE004 tool set includes: Cordless brushless screwdriver CHD-S20LiBH; Also included in the set is 1 CLB-20V-4.0HC 4 Ah battery from the ONE FOR ALL line and a CLC-20V-2.4H charger The strong case made of high-quality plastic is distinguished by improved ergonomics and stability. The size of the case is 445 x 320 x 170 mm Can be combined with XCUBE system CHD‑S20LiBH A versatile tool for professional use. Designed for highly efficient screwing and drilling. The brushless motor provides the most productive work and high torque, which allows you to use the tool for complex tasks. Basic parameters - Impact function - Rotation speed 0-500/0-2000 rpm - Torque 100 Nm - Chuck size 1.5-13 mm - Number of tightening stages 18+1+1 Set contains: 1x XCUBE case for tools; 1x CHD-S20LiBH; 1x rechargeable battery 4.0H; 1x battery charger.
Li-ion Cordless glue gun 20V
The WORCRAFT CLG‑S20Li hot glue gun is a tool for gluing any materials using glue sticks. The ability to operate on a rechargeable battery increases the maneuverability of the gun and allows it to be used while away from an outlet Basic parameters - Heating temperature 200 °C - Heating time 60 s - Productivity 15 grams/min - Rod diameter 11 mm - LED backlight - Ready-to-use indicator Contains: 1x CLG‑S20Li cordless glue gun; 3x glue stick; 1x rechargeable battery 4.0H; 1x battery charger.
Li-ion Cordless grease gun 20V, 4.0Ah
The WORCRAFT CGG-S20Li Cordless Grease Gun is a unique, reliable tool with an ergonomic design for a wide range of manual lubrication tasks for bearings, industrial and manufacturing equipment, as well as agricultural and construction equipment. The powerful motor ensures efficient operation with a maximum discharge pressure of 69 MPa. Clean work due to pre-setting of the pumping speed with a regulator with 5 levels. Loading in two ways : filling with a spatula, installing a cartridge. Main parameters - Discharge pressure up to 69 MPa (10000 psi) - Discharge speed up to 280 g/min - Hose length 76 cm - Works with cartridges 400-420 In the set included: 1 pcs Li-ion 20V 4.0Ah battery, 1 pcs battery charger, grease hose and coupler Package dimensions 415 x 280 x 120 mm (without charger and battery)
Li-ion Cordless Hand Saw 20V with extension rod
Ideal for trimming, pruning trees and bushes around the home Brushless motor Being battery powered allows it to be used well away from a annoy cables, or avoid noisy gasoline engine SDS bar and chain tensioning for easy and quick assemble The telescopic handle with an adjustment range of 110-168 cm allows you to cut high branches and tree tops Minimal weight - the bar is made of strong and light materials, this reduces the load on the hands and allows you to easily control the tool during work Quick and reliable fixation of the tool and battery on the extension ensures the safety of the user Soft Grip Handle Mechanical chain brake Automatic chain tensioning Chain speed 7.5 m/s Chain link quantity 36 pcs Drive link thickness 1.09 mm (0.043”) Chain step 1/4“ (6.35 mm) Bar lenght 150 mm Max cutting branch Φ140 mm Cutting capacity 145 mm Oil revervoir capacity 40 ml Battery: Li-ion 20V 4.0Ah In the set included: 1 battery and charger, chain saw. bottle of oil, guiding bar protector and telescopic extension Weight 1.79 kg (with battery)
Li-ion Cordless Hand Saw CHS-S20LiB Brushless motor Spare part
Spare part for the WORCRAFT CHS-S20LiB Li-ion cordless hand saw with brushless motor. Designed to replace a worn or damaged part and restore the tool to working order. Please check that your tool model matches before ordering.Brand: WORCRAFTCompatibility: CHS-S20LiBType: spare part
Li-ion Cordless Hand Saw CHS-S20LiB Guide Bar 152mm. Spare part
Guide bar – spare part for the WORCRAFT CHS-S20LiB Li-ion cordless hand saw. The saw chain runs along the guide bar, so a worn or bent bar should be replaced to keep cutting accurate and safe.Brand: WORCRAFTCompatibility: CHS-S20LiBGuide bar length: 152 mm
Li-ion Cordless Hand Saw CHS-S20LiB No.3 Chain
Chain link quantity 36 pcs / thickness 1.09 mm (0.043”) Chain L= 152 mm Chain step 1/4“ (6.35 mm)
Li-ion Cordless Hand Saw CHS-S20LiB Oil cap Spare part
Oil cap supplied as a spare part for the WORCRAFT CHS-S20LiB Li-ion cordless hand saw. Used to replace a lost or damaged cap so the oil tank stays properly sealed and oil does not leak out.Brand: WORCRAFTCompatible model: CHS-S20LiBType: spare part
Li-ion Cordless Hand Saw CHS-S20LiB Regulating Plate. Spare part
Regulating plate for the WORCRAFT CHS-S20LiB Li-ion cordless hand saw – spare part. It is fitted in place of a worn or damaged plate to restore correct operation of the saw. Please check your tool model for compatibility before purchase.Brand: WORCRAFTCompatibility: CHS-S20LiBType: spare part
Li-ion Cordless Hand Saw CHS-S20LiB Sprocket Spare part
Sprocket – a spare part for the WORCRAFT CHS-S20LiB cordless hand saw. Intended to replace a worn or damaged sprocket, restoring proper drive operation and extending the tool's service life.Brand: WORCRAFTCompatible with: CHS-S20LiBPart type: spare part
Li-ion Cordless Impact Driver CIW-S20Li Motor Spare part
Motor – spare part for the WORCRAFT CIW-S20Li Li-ion cordless impact driver. Used to replace a damaged or worn motor and restore the tool to working order without buying a new one.Brand: WORCRAFTCompatibility: CIW-S20LiType: spare part
Li-ion Cordless Impact Driver CIW-S20Li Switch assy
Switch assembly for the WORCRAFT CIW-S20Li Li-ion cordless impact driver – spare part. The switch turns the tool on and controls it, and should be replaced if it is damaged or not working. Please check your tool model for compatibility before purchase.Brand: WORCRAFTCompatibility: CIW-S20LiType: switch assembly
Li-ion Cordless Jig Saw 20V
WORCRAFT CJS-S20LiB is an extremely powerful jigsaw for quickly cutting lumber up to 135 mm thick Adjustable rod stroke frequency and the presence of several pendulum stroke modes ensure precise, fast work and allow you to cut a wide variety of materials The modernized body shape makes it easier to control the sawing direction and reduces the strain on the user's hands Brushless motor Strokes per minute 800 - 3800 Cutting sheet thickness in the -45° - + 45° wood 135 m, metal 10 mm Exhaust - rear In the set included: 1 20v 4.0 ah battery and charger CE conformity
Li-ion Cordless leaf blower vacuum mulcher 40V (20V+20V)
Cordless vacuum/blower and shredder is ideal for blowing leaves, grass clippings, twigs and loose garden debris from patios, driveways, courtyards, decks and footpaths, easily and effectively Electronic speed control for constant speed Tool-free change between suction and blowing function Adjustable additional handle Debris bag with long zipper for easy discharging Extra big suction port (0.15 m2) for easy working on huge leaves Big die-casting aluminum fan for strong suction or blowing power Big dual toothed steel tough blade equipped for crushing into 8:1 mulching ratio, which will reduce large piles of garden waste into easily manageable mulch Motor speed 6000-12000 rpm Suction air flow 8 m³/min Blow air flow 17000 m³/min Shred rate 8:1 Collection bag 45 L Dimensions 1250 x 950 x 220 mm Run time (4.0Ah battery pack) Approx. 20min In the set included: cordless vacuum blower, dust bag, backpack belt, long bolt & nut, 2 batteries and twin charger Weight 3.2 kg
Li-ion Cordless Metal Nibbler 20V
The WORCRAFT CHMN-S20LiB cordless metal nibbler are a convenient and mobile tool designed for quick and precise cutting of metal sheets. The rod speed is up to 1900 rpm , and the maximum cutting thickness is: for ordinary steel (400 N/mm²) - up to 1.6 mm, for high-strength steel or stainless steel (600 N/mm²) - up to 1.2 mm, and for aluminum (200 N/mm²) - up to 2.5 mm. These scissors are widely used in construction, installation work, and in the production of ventilation systems and metal structures. - Metal thickness 0.8 - 2.5 mm - Slot width 5 mm - Rod stroke frequency 1900 min - Start button lock - Protective plate - Comfortable handle Set includes: Cordless metal nibbler CHMN-S20LiB, auxiliary handle, protective plate, open-end wrench, hex key, battery 4.0Ah, charger.
Li-ion Cordless Metal Shears 20V
The WORCRAFT CHMS-S20LiB cordless sheet metal shears are a powerful and convenient tool designed for accurate and quick cutting of various metal materials. Thanks to a powerful brushless motor and a shaft speed of up to 2600 rpm, these shears provide high performance and precision when working with a variety of materials. The compact design, light weight and comfortable ergonomic handle make them ideal for use in confined spaces. - Metal thickness 1 - 3.2 mm - Minimum cutting radius 50 mm - Rod stroke frequency 2600 min - Start button lock - Protective plate - Comfortable handle Set includes: Cordless metal shears CHMS-S20LiB, auxiliary handle, protective plate, open-end wrench, hex key, battery 4.0Ah, charger.
Li-ion Cordless mini die grinder 6mm 20V
The WORCRAFT CDG-S20LiB cordless straight grinder is designed for turning, grinding, rust removal, milling, polishing, mirror polishing and engraving of any materials. 6 speed settings expand the functionality of the tool, allowing you to choose the necessary mode for different types of work. Convenience and comfort of work The "Soft Start" system allows the engine to accelerate smoothly, eliminating jerks during start-up and shock loads on internal parts. The rubberized front handle allows you to securely hold the tool in your hands. The restart protection function increases user safety. Basic parameters Brushless motor Collet size 6.0 mm Disc diameter 25 mm 6 rotation speeds (10000‑26000 rpm) Electronic speed stabilization Set includes: Cordless straight grinder WORCRAFT CDG-S20LiB, operating instructions, wrench 2 pcs, battery 4.0Ah, charger.
Li-ion Cordless mini grinder with accesorries 20V
Multifunctional tool designed to perform a wide range of complex and precise operations on engraving, grinding, polishing, cutting and cleaning of various surfaces The flexible shaft significantly increases the convenience of use, and the presence of 40 different nozzles in the set The 3.2 mm universal collet allows the use of tooling from other manufacturers A big advantage is a powerful motor, due to which the torque indicator increases, which makes it easy to work with any material and any nozzles The rotation speed regulator with a range of 5000 - 33000 rpm expands the functionality of the engraver: in such cases it can be used when working with ceramics, plastic, wood, glass, metals and other materials On the upper surface of the case there is a platform for installing accessories Controls are conveniently located Can be wall mounted to save space Reliable and durable housing made of reinforced ABS plastic protects internal mechanisms from external damage in case of accidental impact or fall Improved cooling system that prevents the engine from overheating by dissipating heat In the set included: engraver, 1 pcs 20 V 4.0 Ah battery, 1 pcs charger, interchangeable working head/accessory (in organizer box) (40 pcs.); flexible shaft Weight 1.66 kg (with battery)