Electric, cordless power tools
Soldering station with LCD display 60W 900M
Soldering station with digital LED display, temperature control and stabilization and sleep function. The set includes a multifunctional housing with an end support, a place for a tin roll and a brass tip cleaner. The station supports a soldering iron with a built-in ceramic heater for the very popular 900M series interchangeable tips. Relatively high power combined with required soldering features and a hard flask with silicone, high temperature resistant power cord Power: 60W Temperature range: 90 - 480 ° C Temperature accuracy: + - 2 ° C Temperature stabilization Device sleep mode: 10 min ON/OFF button on the side A digital display with a blue LED backlight informs us about: The actual nozzle temperature is set The soldering iron is placed on the stainless steel handle. Heater operating voltage: ~ 230V Nozzle type: 900M Ceramic heater Outer diameter of the heater: 3.85 mm Cable length: 100 cm Weight: about 50 g The YT-82460 soldering station is manufactured using ESD-safe technology, which guarantees that no excessive electrostatic charge will accumulate on the housing. As a result, we limit the risk of damaging sensitive SMD circuits, for example. It heats up to an operating temperature of 350 ° C in about 30 seconds. The temperature stabilization function allows the set nozzle temperature to be maintained under various heat demand conditions for proper solder connection. Depending on the size of the soldered element and the soldering field, the nozzle emits more or less heat, and the appliance continuously reads and compares the actual value of the nozzle with a built-in nozzle temperature sensor, then increases or decreases energy consumption as required. to maintain the set value. temperatures. The best effect of this function is achieved by choosing a nozzle whose inner diameter is as close as possible to the diameter of the heater. We recommend nozzles with an inside diameter ranging from 4.0 to 4.5 mm The device's hibernation feature allows the station to enter standby mode, which automatically reduces the operating temperature to 200 ° C. This avoids unnecessary heating of the nozzle, which significantly extends its service life. The function activation time is set to 10 minutes at the factory on the YT-82460
Soldering tip set (10pcs) 900M
Type 900M Outer diameter 6 mm Inner diameter 4.5 mm Coated soldering tips in the most popular shapes: 900M-T-I tip: sharp cone tip 900M-T-B tip: cone-type tip 900M-T-K tip: flat tip cut at an angle of 45 ° 900M-T-1.2D blade: flat tip resembling a screwdriver, 1.2 mm wide 900M-T-2.4D blade: a flat tip resembling a screwdriver, 2.4 mm wide 900M-T-3.2D blade: a flat tip resembling a screwdriver, 3.2 mm wide 900M-T-1C blade: round tip cut at an angle of 45 ° with a diameter of 1 mm 900M-T-2C blade: round tip cut at an angle of 45 ° with a diameter of 2 mm 900M-T-3C blade: round tip cut at an angle of 45 ° with a diameter of 3 mm
Soldering tip set (6pcs) 900M
Type 900M Outer diameter 6 mm Inner diameter 4.5 mm Coated soldering tips in the most popular shapes: 900M-T-I tip: sharp cone tip 900M-T-B tip: cone-type tip 900M-T-K tip: flat tip cut at an angle of 45° 900M-T-2.4D blade: a flat tip resembling a screwdriver, 2.4 mm wide 900M-T-2C blade: round tip cut at an angle of 45 ° with a diameter of 2 mm 900M-T-3C blade: round tip cut at an angle of 45 ° with a diameter of 3 mm
Soldering-iron 300W
Production standard GB / T 7157 High quality heating core The handle is resistant to high temperatures Fast heat dissipation Fast heat transfer - improves work efficiency
Soldering-iron 60W
Voltage 230 V / 50 Hz Power input 60 W Max temperature of soldering tip 500 °C
Soldering-iron with LCD display 80W 900M
Precise soldering iron with temperature-controlled buttons for the very popular 900M series interchangeable tips. The integrated LCD display shows the set and actual nozzle temperature and allows you to calibrate the temperature. Power: 80 W Warm-up time: ~ 20s to 350 ° C Maximum nozzle temperature: 480 ° C Temperature range: 50 - 480 ° C Temperature accuracy: + - 2 ° C Temperature stabilization Temperature calibration Ceramic heater Outer diameter of the heater: 3.85 mm ON / OFF button Cable length: 100 cm The soldering iron heats up to approx. 350 ° C in about 20 seconds The temperature stabilization function allows the set nozzle temperature to be maintained under various heat demand conditions for proper solder connection. Depending on the size of the soldered element and the soldering field, the nozzle emits more or less heat, and the appliance continuously reads and compares the actual value of the nozzle with a built-in nozzle temperature sensor, then increases or decreases energy consumption as required. to maintain the set value. temperatures. The best effect of this function is achieved by choosing a nozzle whose inner diameter is as close as possible to the diameter of the heater. We recommend nozzles with an inside diameter ranging from 4.0 to 4.5 mm The temperature calibration function allows you to recalibrate the built-in temperature sensor. Depending on the quality, size and degree of wear of the nozzle, the demanding user can calibrate the sensor with the help of a temperature measuring device. The correct reading not only has a positive effect on the temperature stabilization, but also helps the experienced user to avoid an error due to overheating of the PCB connection. To calibrate the temperature: briefly press the red button, then use the temperature control buttons to set the actual nozzle temperature and wait about 3 seconds for the setting to be confirmed. The temperature flashes on the display during the calibration process.
Staples 22mm for combined nailer CNS-S20LiH type 91 gauge 18 (100pcs)
Type 91 / 18 Gauge Length 22 mm Suitable for CNS-S20Li & CNS-S20LiH
Steel blade 150mm for reciprocating saw
For reciprocating saws RS07115 and CSSS20LI
Table saw 250mm 2000W
Rated voltage 220 - 240 V, 50/60 Hz Input power S1: 1800 W / S6 25%: 2000 W No load speed 5000 /min Cutting capacity 90° 85 mm / 45° 65 mm Main table size 640 x 486 x 28 mm Side table size 640 x 225 x 28 mm Rear table size 486 x 225 x 28 mm Height adjustment 0 - 85 mm Blade size Φ250 x Φ30x2.8 x 24T Saw blade thickness 2.8 mm Suction connection diameter 35 mm Cable length 5 m Insulation class II Dimensions 1126 x 936 x 900 mm Package dimensions 720 x 620 x 350 mm Weight 19 Kg
Thermal cutter for plastic / styrofoam 220W
The thermal cutter is used to cut parts made of polymers: polypropylene, PVC and styrofoam.The thermal cutter is equipped with a temperature setting potentiometer, ready-to-work light and a slider for adjusting the blade length. The device is simple to operate and handy Rated voltage 220 - 240 V, 50/60 Hz Rated power input 220 W Application: Polystyrene foam, PVC, PP Temperature control range: 1: ~70° C 2: ~150° C 3: ~260° C 4: ~390° C 5: ~450° C
Thermal cutter for plastic / styrofoam 220W
Knife for precision cutting of facade polystyrene, floor polystyrene and plastics. Hot cutting prevents polystyrene granules from being scattered on the building site and spread by the wind, as is the case when cutting with a panel saw. The unit has a short heat-up time and infinitely variable temperature control. It cuts polystyrene of various hardnesses (graphite, dalmatian, styrodur, floor, right up to polystyrene of hardness EPS 200 - used under the floor of garages). Cuts polypropylene ropes and braided synthetic fibre webbing without fraying. Power: 150 W Maximum cutting length: 200 millimeters Maximum operating temperature: 500 ˚C Weight: 400 g Set included: Knife, 150 mm blade, 200 mm blade, wire brush for cleaning
Thread adapter M14, 6mm
Adapter with M14 thread for attaching accessories - pads, attachments, grinding discs and polishing heads to a drill or straight grinders. Diameter: 6mm Length: 45mm
Transformer soldering gun
1pcs. Electric soldering gun 2pcs. Soldering tip 1pcs. Solder 1pcs. Solder paste Voltage 230 V/50 Hz Power input 100 W is enough to heat the tip from room temperature to approximately 350 °C Work type S2 20% 12s / 48s With lighting Weight 0.65kg Protection grade IPX2 CE conformity Packing - plastic box
Tripod for infrared lamps
Mounting kit for connecting infrared heaters Powder coated steel Surface finishing powder coated For YT-99530, YT-99531, YT-99532, YT-99536 Height 1100 - 1800 mm Lighting angle can be adjusted Tube diameter ø 32, 35 mm Adjustable head Yes A stable base
Tube belt sander 40x760mm 800W, 230V
The device is distinguished by high quality of workmanship, manufactured using the latest technology based on a proven design used for sanding various tubes or pipes Voltage 220 - 240 V Frequency 50 Hz Power 800 W Idle speed 900 rpm Second speed 2800 rpm Belt dimensions 760 x 40 mm (Grain 60) Package dimensions 630 x 495 x 350 mm Weight 19.4 kg
Tube belt sander spare part no. 53+54 Plastic roller installed set
Spare part no. 53 + 54 – a set with a pre-installed plastic roller for the BOKY MACHINE tube belt sander. Used to replace a worn or damaged roller assembly and restore the sander's correct operation.Brand: BOKY MACHINEPart numbers: 53, 54Includes: installed plastic rollerType: spare part
USB car charger with fast charge port 12V/24V, USB/3.1A + USB/QC3.0
The car charger contains modern technology that works with all USB cables, and the voltage is adjusted automatically thanks to the built-in SMART function. It has a multi-stage protection system that ensures stable and safe operation while eliminating the risk of damage to the device being charged. The device can be connected in both 12V and 24V vehicles! PRODUCT SPECIFICATION: Input voltage: 12V / 24V Output voltage: 5V/3.1A, 12V/1.8A Maximum charging current: 3.1A Connectors: 2x USB-A SMART function Color: Black The QUICK CHARGE function is an accelerated charging process thanks to the increased voltage of the current flowing to the device. It offers the possibility of charging compatible mobile devices up to 4 times faster.
USB charger with fast charge port 220V, 2xUSB/2.1A +1USB/QC3.0
The USB-plug adapter will come in handy wherever there is no way to connect a USB cable to a computer. It is small in size, which allows us to take it with us everywhere. The charger allows you to charge 3 devices simultaneously! 2 x 2.1A USB ports 1 x QC 3.0 USB QUICK CHARGE port It is made of the highest quality products, making it safe for your devices. It has overvoltage protection and also controls protection during use. The QUICK CHARGE function is an accelerated charging process thanks to the increased voltage of the current flowing to the device. It offers the possibility of charging compatible mobile devices up to 4 times faster. SMART FUNCTION - AUTOMATICALLY ADJUSTS THE CHARGING VOLTAGE QC 3.0 - FOUR TIMES FASTER CHARGING!!!
Wall and ceiling grinder with suction 215mm 900W 230V
The WORCRAFT DS09-215 wall sander is a versatile and practical tool for creating perfectly smooth walls and ceilings. Thanks to the 900W motor with metal gearbox, sanding walls, ceilings, removing wallpaper, paint and excess plaster is easy. The dust extraction system is equipped with a turbine, thanks to which the dust is collected in a special bag, this allows you to use the tool without connecting a vacuum cleaner. The powerful and efficient engine allows you to cope even with the processing of hard surfaces. Adjusting the rotation speed makes it possible to properly adjust the tool for various tasks. Bright 2-strip LED lighting with separate switching illuminates the work area well and helps to detect irregularities on the surface. The dust removal system into a special bag prevents dust from accumulating in the room and work surface, WITHOUT using a vacuum cleaner. Vacuum control valve , which allows you to adjust the force of pressing the grinding disc against the surface. Soft start ensures smooth and vibration-free start-up, and also helps to avoid premature wear of parts and components. High-quality Velcro allows you to easily install or replace sanding paper of any grit and ensures its secure fixation. The long length of the power cord and dust extraction hose significantly expands the working area. Comfortable work in any plane thanks to well-thought-out mechanisms for turning, balancing and fixing the position of the grinding machine head. A convenient telescopic pole that is easy to adjust to your height and the necessary tasks. The anti-slip handle provides comfortable control and secure fixation of the tool in the hands, preventing it from slipping. Excellent balancing and low weight significantly reduce the strain on the user's arms and back. Long-term work without fatigue , thanks to the power button lock function. The durable body made of high-quality ABS plastic prevents damage to internal elements during impact. An efficient cooling system removes heat from the engine, preventing overheating and extending its service life. Improved heat-resistant grease significantly reduces friction and heating temperature. The gear reducer gears are made of high-strength steel. Multi-layer coating of the armature and stator windings with heat-resistant varnish reliably protects the motor from construction dust and interturn short circuits. Quick replacement of carbon brushes , thanks to service covers on the housing, greatly simplifies tool maintenance. - Power 900 W - Rotation speed 800-1800 rpm - Grinding disc diameter 215 mm - Soft start function - Built-in dust extraction system - Telescopic rod - Bright LED lighting Equipment: WORCRAFT DS09-215 wall sander; sealing ring 2 pcs; flexible dust extraction hose; dust bag; bag for storage and transportation; hex key; sandpaper 2 pcs; packing box.
Wave staples 0.8mm (100pcs)
Hot staples for plastic welder guns DH50 and DHB100
Welder for plastic welding 1000W
A universal tool for soldering plastic elements and tarpaulins The welder has the function of smooth regulation of the temperature of the blown air Very strong and durable heater, ceramic core It is most often used for welding elements such as: headlamps, bumpers, mirrors, heater housings, batteries, air conditioning devices, spoilers, gasoline, oil and water tanks as well as truck body parts The device is a suitable solution for soldering and desoldering (removing) electronic components, such as: SOIC, CHIP, QFP, PLCC, BGA Power supply 230V / 50Hz Output power 1000W Temperature range 40° - 550° C Airflow type blower Max air flow 230 L/min Dimensions ⌀100 x 330 mm, handle ⌀56 mm In the set included: plastic welder, 2 replaceable nozzles, spare brushes, mounting accessories Weight 1.1 kg