Material CrV drop forged steel

Three-jaw gear puller for removing gears, bearings, pulleys and other parts tightly fitted on a shaft. The double holes allow the jaw position to be changed to suit parts of different sizes.Number of jaws: 3Available sizes: 14" (355.6 mm, jaw opening 350 mm), 16" (406.4 mm, jaw opening 400 mm), 20" (508 mm, jaw opening 500 mm), 24" (609.6 mm, jaw opening 600 mm)

3 jaws with quick action mechanism for setting and fixing jaws in the right position Material CrMo steel

Set includes one slide hammer assemble & 4 clamps Open clamps by turning handle clockwise to snug against the bearing for pulling out evenly without damage the parts 10 pcs. Clamps 8 - 11, 12 - 17, 18 - 23, 24 - 29, 30 - 34, 34 – 38, 39 - 43, 44 - 48, 49 - 53, 54 - 58 mm 3 pcs. Screw M10 x 1.5P, M10 x 1.5P & M8 x 1.25P, M10 x 1.5P & M6 x 1.0P 1 pcs. Slide Hammer 1 pcs. Two Jaw Puller Packing - Plastic box

1 pcs. Sliding hammer 0.85 kg, L= 377 mm 4 pcs. Collet: 10-14 mm 15-19 mm 18-25 mm 25-32 mm Video of analog product:

Remover with double arms- 1pc Arm extenders - 2 pcs Central thread screw - 1 pc Ball end thread puller adapters (9, 11, 12.5 mm) - 6 pcs

Remover with double levers - 1pc Lever extenders - 2 pcs Central thread screw - 1 pc Ball end thread puller adapters (5, 6, 8 mm) - 6 pcs Socket - 1 pc

Internal adapter #1: capacity: 15 to 30 mm Internal adapter #2 capacity: 30 to 80 mm External three leg puller capacity: 15 to 80m m Slide hammer: 1.36 kg, L= 425 mm, thread 5/8" UNF

Jaw spread 10 - 50 mm Max reach 300 mm

Mini 2-jaw puller for removing gears, bearings, pulleys and other press-fitted parts from shafts. Its compact size makes it suitable for small parts and tight spaces.Number of jaws: 2Available sizes: 3" (76.20 mm), opening 60 mm, H 40 mm; 4" (101.60 mm), opening 65 mm, H 65 mm

1 pcs. Beam 1 pcs. Separator 15 - 58 mm 2 pcs. Jaw 50 mm 1 pcs. Thrust screw 2 pcs. Extension rod 45 mm 2 pcs. Extension 30 mm

Capacity 1 t Spread 19 - 45 mm Stroke 73 mm

Made from high quality steel Used for repairing the water pump Jaw spread 150 mm

5 pcs. Threaded rods (M10, M12, M14, M16, M18) 22 pcs. Press sleeve: 34/44 mm 36/46 mm 38/48 mm 40/50 mm 42/52 mm 44/54 mm 46/56 mm 48/58 mm 50/60 mm 52/62 mm 54/64 mm 56/66 mm 58/68 mm 60/70 mm 62/72 mm 64/74 mm 66/76 mm 68/78 mm 70/80 mm 72/82 mm 75/85 mm 80/90 mm

Use this easy-to-use CV joint puller, without spending a lot of effort, and without causing any damage to expensive aluminum transmission cases or other components With 63mm 48mm Joint Fork: Our kit includes opening 63mm and 48mm cv joint fork removing adapter, the CV Joint Fork is threaded internally, and the Slide Hammer stick is threaded externally. the joint fork could fit on the slide hammer stick, 63mm and 48mm fit most vehicle models, have a wide use This kit has everthing you need to remove CV axle or half shaft.

2.5 kg Slide hammer with 570 mm shaft Twin leg puller: Internal capacity Ø 35 - 110 mm, reach 82 mm External capacity Ø 50 - 140 mm, reach 75 mm Triple leg puller: Internal capacity Ø 50 - 135 mm, reach 82 mm External capacity Ø 20 - 135 mm, reach 75 mm

2.5 kg Slide hammer with 570 mm shaft Twin leg puller: Internal capacity Ø 35 - 110 mm, reach 82 mm External capacity Ø 50 - 140 mm, reach 75 mm Triple leg puller: Internal capacity Ø 50 - 135 mm, reach 82 mm External capacity Ø 20 - 135 mm, reach 75 mm

Suitable for the following models: Mercedes-Benz: W220, W211, W203 BMW: E31, E32, E34, E38, E39, E53, E60, E65, E66

Size 2" Jaw spread 12 - 50 mm Video of analog product:

Spread 60-135mm Reach 140mm

Spread 60-170mm Reach 190mm

Most of European trucks manufacturer design special spring eye bush to prevent loose and lead to hard to replacement if without special tools. We create this master kit to solve your problem Application VOLVO (FM12), RENAULT(430/450/460), MAN-TGA (410/414/460), DAF VOLVO (FM12) - Ø 51 mm DB / Renault (430/450/460) - Ø 60 mm MAN-TGA (140/414/460) front axle spring ROR, SAF - Ø 68 mm 1x Hydraulic cylinder 12t 1x Collecting sleeve Ø90x166mm 1x Supporting ring (removal) Ø 74x20mm 1x Supporting ring (removal) Ø 64x20mm 1x Pressure piece (removal) Ø 66x35mm 1x Pressure piece (removal) Ø 59x34mm 1x Pressure piece (removal) Ø 49x34mm 1x Clamping block Ø 90x54mm 1x Half shell set Ø 68x54mm 1x Half shell set Ø 60x54mm 1x Half shell set Ø 51x54mm 1x Insertion block Ø78x35 1x Counter-bearing (assembly) Ø 78x37mm 1x Counter-bearing (assembly) Ø 98x36mm 1x Supporting ring (assembly) Ø 108x26mm 1x Supporting ring (assembly) Ø 103x26mm 1x Supporting ring (assembly) Ø 108x25mm 1x Spindle (assembly) M16x2.0 L=280mm 1x Spindle (removal) M16x2.0 L=195mm

A twin and triple leg reversible puller kit designed for removing bearings, gears, pulleys and other press-fitted parts. The legs can be reversed to grip the part either externally or internally.Configuration: 2-leg and 3-leg pullersLegs: reversible (external and internal grip)Use: car service and mechanical workshops

1 pc. 2-leg sliding bar 1 pc. 3-leg sliding bar 3 pcs. Arms 100 mm 3 pcs. Arms 200 mm 3 pcs. Arms 250 mm 1 pc. Fine thread spindle 160 mm 1 pc. Fine thread spindle 270 mm