These hose removal pliers are made of manganese steel, strong and sturdy, with high- quality springs, moderate strength and handles with a knurled design for a non-slip, more comfortable grip These vacuum lines tube hose removal are quick and easy to access in tight areas, making disassembly faster and more convenient. They offer a quicker and more effective method of removal than other traditional options such as prying or twisting. This not only saves you time, but it also reduces the risk of damaging the hose or the parts it is attached to. These separator pliers pipe repairing are their ability to remove fuel, vacuum, or heater hoses from 5/32” to 1/2” (5 to 15 mm) diameter with ease. This makes them compatible with a wide range of hoses and pipes,such as natural gas pipes, electric auxiliary pipes, heat radiation oil pipes, plumbing tanks, radiators, pumps, air cleaners, and various other hard-to-remove pipes,making them a versatile addition to your tool kit. These auto fuel extremely helpful for pushing and separating stubborn hoses, you can pull back the stubborn tubing while sliding this in and squeezing the grip. By squeezing the grip, it pushes the tips apart, helping to move the tubing. They may not be suitable for very large hoses.

Size Ø2.5, 3, 3.5, 4, 4.5, 5 mm The tool is made of high quality steel Perforation is fast and accurate The handle is made of high-quality PVC rubber, which is comfortable to use and more favorable for long-term use Unique lever design - easy to use Best used for perforating leather, belts, shoes, plastics

1pc - 220 mm punch pliers. For punching holes with a diameter of: 2.5 mm, 3 mm, 3.5 mm, 4 mm, 4.5 mm and 5 mm. Pliers are designed for making holes in felt, leather, textiles, plastic foils, cardboard and others. 1pc - Rivet eye pliers - 150 mm long riveter. The riveter is designed for inserting rivets into holes up to 5 mm. 1pc - Locking pliers - 150mm long 100pcs - Eyelets 25 pcs - Press rivet/studs

Size Ø2.5, 3, 3.5, 4, 4.5, 5 mm

Long pliers with pointed jaws bent at 45°, overall length 275 mm. Designed for gripping, holding and placing small parts in hard-to-reach areas such as engine bays or behind panels.Jaw angle: 45°Length: 275 mmJaw shape: pointed, bent

DIN 5236 L=340mm

Long pliers with jaws bent at 90°, 275 mm in length. They let you grip, hold and position parts in hard-to-reach places, such as the engine bay or tight housings, where straight pliers cannot reach.Length: 275 mmJaw angle: 90°

Long needle nose pliers with straight jaws for gripping, holding and placing small parts in hard-to-reach places. The extra length lets you reach deep into an engine bay or inside machinery where ordinary pliers cannot get to.Length: 275 mmJaws: straight, pointed

DIN 5238 L= 340 mm

Features locking function for non-slip operation Clamp screw allows pliers to be fixed into cup of piston for added pulling power Video of analog product:

Piston ring pliers for fitting and removing piston rings during engine repair. They open the ring evenly, reducing the risk of breaking it or damaging the piston grooves.Brand: YATOApplication: engine repairType: special pliers

Special steel, Nickel-plated For removing and mounting piston rings

Capacity Ø 53 - 175 mm Height 100 mm (4")

Capacity Ø 53 - 175 mm Height 150 mm (6")

Capacity Ø 53 - 125 mm Height 75 mm (3")

Capacity Ø 60 - 175 mm Height 150 mm (6")

Suitable for stainless steel hose clamps Can be used with tool 3/8" drive

Used for tightening clamps, spring steel cable ties Particularly useful in tight spaces Knurled wheel for pre-tensioning Jaw opening range 0 - 40 mm Tool holder size 14 mm HEX and 3/8" (9.5 mm) ratchet

Ø 4.8, 6.6, 8.7, 9.5, 11.3 mm L = 600 mm

Designed for disconnecting push-to-fit quick connectors (such as SAE J2044) 2-button type which are widely found in fluid/vapor transfer system, including fuel line/EVAP system (petrol/diesel), SCR line (Adblue) system, cooling/heating system, and braking line system, etc. Multi-angle jaw design allows various approach to hard to reach/difficult access area

Long reach tool designed to get to awkwardly positioned tag type hose clips Flexible cable and compact head help operation in confined spaces Features ratchet action and vinyl dipped handles for comfort and close control Technical Specifications: Video of analog product:

For replacement of fuel, oil and water hose clamps. Hose clamp with flexible 600mm wire For the removal and locking of clamps into open position. Suitable for metal, plastic metal and self-tightening tensioning hose clamps with diameters of 18 to 54mm.

For removal and installation of valve stem seals Suitable for 16 and 24 valve OHC engines Steel pliers with insulated handles Length: 280 mm