Designed to check the installation of a trailer, car or camper socket, and to find and eliminate faults Battery 9V (not included)

Professional ozonator. Ozonation is a technology of purification and disinfection using ozone. The ozone generator is designed to disinfect and ozonate air and rooms or cars. It has strong aseptic and toxic properties and is therefore used for water disinfection. It naturally accumulates in the stratosphere to form the ozone layer, which plays an important role in absorbing some of the ultraviolet radiation from the Sun reaching the Earth. Removes unpleasant odors, destroys viruses, bacteria and molds. With the ozonator you can: Disinfect clothes in wardrobes; Disinfect air conditioning in passenger cars, vans and trucks; Remove odors and break down harmful chemical compounds, tobacco odors, animal odors; Refresh the air and objects , e.g. after a fire. This process is widely used in fabric renovation; Kill bacteria in the fridge or on contact surfaces; Killing insects in stored grain; Remove yeast and mold spores from the air. Advantages: Perfect air quality for a long time Health-promoting properties Air sterilization Leaves a fresh scent High power for industrial and home use Possibility of car ozonation Simple and convenient operation Solid ozonator housing Power: 150 W Voltage: 230V / 50Hz Timer: 1 - 60 min Filter: Built in 4 pieces Ozone efficiency: 28 g/h

The front with unique path finding proble hock, which can accurately measure the internal problem, voltage and signal from the surface Designed to detect the poor contact and aging lines Multimer function (voltage, resistance, diode, buzzer and etc.) Car battery voltage detection Automatically polarity indicate Easy to operate at limited space With LED lighting Switching rate 3 times/sec Measurement method automatically or manual operation Voltage 2.4-3.6V Temperature °C and °F Buzzing frequency about 2.7kHz Power off automatically

2-in-1 circuit probe and breaker/wire finder DC and AC voltage test Resistance measurement Diode test Current leak / Polarity detection Continuity / Ground circuit / Relay / Fuse testing Component activation Sensor and signal circuit testing Trailer light and connector testing Open-circuit and broken-wire tracing Short-circuit diagnosis and tracing TFT color display: 168 x 128 DC voltage display range: 0–65 V Resistance range: 0 – 100 kΩ Red/green polarity / Audible continuity indication Built-in LED work light Adjustable breaker-finder sensitivity Automatic short-circuit / overload protection 12.2 m / 40 ft / total cable reach Vehicle battery / cigarette lighter power supply for circuit probe Breaker finder powered by 9 V battery The VDIAGTOOL V200 PRO is a multifunction automotive electrical diagnostic kit designed for fast testing, troubleshooting and tracing of vehicle electrical systems It combines a power circuit probe tester and a wire/open-circuit finder in one kit, helping reduce diagnostic time when working on automotive wiring, electrical components and circuits In Mode I, the circuit probe provides four diagnostic modes: DC voltage, AC voltage, resistance and diode testing It can check circuit polarity and continuity, identify poor ground connections, measure electrical values and apply positive or negative battery power directly to components for functional testing The tool can directly activate and test electrical components such as lights, motors, relays, windshield wipers, radiator fans and fuel injectors, helping determine whether the component itself or its wiring is faulty It also supports sensor and signal circuit testing In Mode II, the breaker finder helps trace wiring and locate open circuits, broken wires, poor connections and current leaks without having to dismantle the wiring harness Adjustable sensitivity and a flexible probe help locate faults in confined areas The integrated short-circuit and overload protection automatically interrupts power output if an overload is detected, protecting both the tester and vehicle electrical system After the overload condition is removed, the circuit breaker automatically resets The long test cable provides convenient access around the entire vehicle The circuit probe can be powered directly from the vehicle battery or through the cigarette lighter adapter

Designed for vehicles low voltage circuits Light turns on when voltage is detected Flexible coil cord Long-life LED tube Spring loaded terminal clamp

Made of pure copper, retractable spring wire, with probe protection head Alligator chuck, test range 6~12V~24V low voltage circuit detection Used for the maintenance of large vehicles, automobiles, motorcycles, bulldozers, road rollers and other transportation machinery

EVAP LEAK DETECTOR: The smoke machine features an integrated pressure gauge that helps you to determine whether there is a leak in your EVAP, exhaust, oil line, or cooling system; the provided mineral oil creates smoke that’s pumped through your vehicle’s piping to help you detect the leak’s precise location This portable ~3.7 kg leak detector comes with a built-in flow meter that provides real-time flow rates of smoke being passed; a universal airbag adapter with a pressurized vapor pass-through for easy testing. This automotive maintenance kit includes 3 adapters to fit most intake hoses and connect the 1.5 meter smoke hose tightly to the auto part you want to test for leakage, whether on your car, motorcycle, ATV, speedboat, light truck, or other vehicle Easily connecting to your 12V DC battery (not incl.), leakage detector pumps visible smoke at 15L/min; the oil inlet cap features careful nonslip threading to prevent any leakage; and the machine automatically cuts off power if the maximum working temperature is reached to provide safety of both the operator and device TRANSPARENT DRAIN CAP - The transparent oil drain cap lets you easily monitor the oil level and quality for timely refills DURABLE OIL CAP - The oil inlet cap screws on tightly in place to avoid any leakage and unscrews easily thanks to its nonslip threading BUILT-IN COOLING VENTS - The integrated side vents prevent excessive heat from building up as you work, keeping your machine humming along PRECISION PRESSURE GAUGE - Displays accurate readings to help you detect leaks quickly and easily HELPFUL FLOWMETER - Provide instant smoke flow rates of the part being tested HANDY FLOW ADJUSTMENT - Rotate the control knob to adjust the smoke intensity for quick leack detection HEAVY-DUTY CLAMPS - The reinforced alligator clips boast superior clamping force to firmly connect to your vehicle's battery UNIVERSAL INTAKE ADAPTER - The airbag adapter features a pressurized vapor pass-through, allowing you to quickly and easily test your entire intake or exhaust system Dimensions: 280 x 220 x 185 mm Rated Power: 48W Input Power: DC 12V Max. Flow Rate: 15 L/min. Max. Operational Pressure: 1 Bar Power Cord Length: 1.5 m Net Weight: 3.7 kg

A battery hydrometer checks the charge of a battery by measuring the density of the electrolyte in the cells To measure density from 1100 kg/m³ to 1300 kg/m³

Test results show state of voltage, state of health,charging, actual CCA value, conductance value, internal resistance Time mode of test about 3 seconds For testing 12V batteries For testing 12V and 24V charging systems Battery cranking test, load test Battery charging test, ripple test Test results storage and review Truck only could test the 24V system, not the 24V battery Print test results and battery report on PC CCA range 40 - 1000 A (3-220Ah) Working temperature -20 °C +50 °C Multilanguage interface: English, French, German, Spanish, Italian, Polish USB interface

Battery voltage 12 V Supported batteries lead-acid AGM / GEL / SPIRAL / SLI and 12 V lithium batteries CCA test range 30 - 3000 A Voltage measurement range 7 - 30 V DC Starting system test 12 / 24 V Charging system test 12 / 24 V High-voltage protection QC fast test Test result storage by QR code Test data review up to 99 records Display 2.8" TFT color LCD with backlight Housing material ABS plastic Operating temperature -18 °C to +50 °C Important: 24 V refers to starting and charging system testing. The BAT-360 battery test itself is intended for 12 V batteries  

Tester for all types of batteries with a nominal voltage of 1.5V and 9V. 1.5V: AA, AAA, R03, SH16, MN2400, HP7, MN1500, UM3, C, HP11, MN1400, SO11, LR14, UM2 D, HP2, MN1399, SP2, R20, UM1; 9V: PP3, MN1604, 6F22, 006P It allows you to easily check whether the battery is suitable for use. The tester does not require power supply. The measurement is made by touching the battery poles with the metal tips of the tester. The measurement is performed under load, which makes it more reliable than measurement with a traditional multimeter. Thanks to its small size, it will fit in any cabinet or toolbox. green field with the word GOOD - the battery is suitable for use yellow field with the word LOW - the battery will run out soon red field with the words REPLACE, RECHARGE - the battery is at the end of its capacity and needs to be replaced with a new one

Communication method: Bluetooth 4.0 Main control chip: MM32L073 Software platform: Support Android /Windows/IOS Working voltage: 12V working current 32mA Working temperature: 40℃~80℃ Working humidity: less than 60% Features: 1. Small size, highest chip integration, own independent appearance patent, utility model patent and software copyright 2. The software can perform the following operations: Read error diagnosis codes-general and manufacturer-specific, and display their meaning (the database has more than 3000 common code definitions) Clear the error code and turn off the MIL ("Check Engine" indicator) Display current sensor data, including: engine speed per minute (RPM), calculated load value, coolant temperature, fuel system status, vehicle speed short-term fuel condition, long-term fuel condition, intake manifold pressure, fuel injection lead time, inlet Air temperature, air flow rate, absolute throttle position, oxygen detection voltage associated with short-term fuel status, fuel system status, fuel pressure, fuel consumption monitoring, and many other data Protocols Supported By OBDII: 1. SAE J1850 PWM (41.6Kbaud) 2. SAE J1850 VPW (10.4Kbaud) 3. ISO9141-2(5 baud init, 10.4Kbaud) 4. ISO14230-4 KWP (5 baud init, 10.4 Kbaud) 5. ISO14230-4 KWP (fast init, 10.4 Kbaud) 6. ISO15765-4 CAN (11bit ID, 500 Kbaud) 7. ISO15765-4 CAN (29bit ID, 500 Kbaud) 8. ISO15765-4 CAN (11bit ID, 250 Kbaud) 9. ISO15765-4 CAN (29bit ID, 250 Kbaud) Software Platform: 1. Compatible software Window version: ScanMaster-ELM, ScanTool.net, PCMSCAN, etc.; Android version: Torque, DashCommand, OBD Car Doctor, Auto Doctor, Mini OBDII, EOBD, etc.; Symbian version: OBDScope iOS: Torque 2. Compatible platforms Software support platform: Windows XP, Windows 7/8/10, Android, Symbian and other systems Product size: 57x46.2x24.2mm Packing size: 100x63x25.5mm Weight: 38g

This product is a automobile brake fluid/coolant boiling point detector. Detecting the boiling point of brake fluid to judge the quality of brake fluid is closely related to driving safety. This instrument is to detect the boiling point of brake fluid, quickly and accurately, measure the boiling point of automobile brake fluid (brake oil)DOT3/DOT4/DOT5 /DOT5.1, to help to maintain a car, widely used in automobile repair shop,4S shop and other automotive industry. Product Features: Coolant Boiling Point: 100°C - 180°C ±3% Brake Fluid Boiling Point: 180°C - 320°C Testing Time: 60 seconds Operating Temperature Range: 0°C~50°C LED Display: Flexible tube; battery clips Detection Range: 90°C~350°C Power Supply: DC12V 10A (suitable for car batteries) Lowest Boiling Point (Vaporization Point): 100°C - 180°C ±3% and 180°C - 320°C Operating Voltage: 12V car battery (external power supply). Function: Special tool for testing the boiling point of automotive brake fluid/coolant. Quickly and accurately measures the boiling point of brake fluid (DOT3/DOT4/DOT5/DOT5.1). Polarity protection for the battery; no need for consumable test strips, saving costs. Suitable for testing different types of brake fluids, providing the lowest boiling point (vaporization point) and recommended minimum value. Use protective goggles to avoid brake fluid splashing into the eyes during operation. Do not test if there is insufficient liquid in the beaker (dry burning of the test rod can cause damage). After testing, both the test rod and liquid are at high temperatures; avoid touching to prevent burns. Used brake fluid's structure is compromised and boiling point lowered; do not reuse in the oil tank as it affects driving safety. Dispose of used brake fluid after testing and replace with 25ml of clean water for boiling point testing to clean residual brake fluid. Data may vary if the same brake fluid sample is tested consecutively due to structural changes after boiling, which is normal. Liquid temperature above 70°C start heating; flexible probe for convenience. Automatic voltage protection and dry burn protection if button is unintentionally released during testing. Switchable between Celsius and Fahrenheit; battery clips ensure good contact with the power supply.

Communication method: Bluetooth 5.1 Software platform: Support Android/IOS Working voltage: 12V working current 32mA Working temperature: 40℃~80℃ Working humidity: less than 60% Features: 1. Small size, highest chip integration, own independent appearance patent, utility model patent and software copyright 2. The software can perform the following operations: Read error diagnosis codes-general and manufacturer-specific, and display their meaning (the database has more than 3000 common code definitions) Clear the error code and turn off the MIL ("Check Engine" indicator) Display current sensor data, including: engine speed per minute (RPM), calculated load value, coolant temperature, fuel system status, vehicle speed short-term fuel condition, long-term fuel condition, intake manifold pressure, fuel injection lead time, inlet Air temperature, air flow rate, absolute throttle position, oxygen detection voltage associated with short-term fuel status, fuel system status, fuel pressure, fuel consumption monitoring, and many other data Protocols Supported By OBDII: 1. SAE J1850 PWM (41.6Kbaud) 2. SAE J1850 VPW (10.4Kbaud) 3. ISO9141-2(5 baud init, 10.4Kbaud) 4. ISO14230-4 KWP (5 baud init, 10.4 Kbaud) 5. ISO14230-4 KWP (fast init, 10.4 Kbaud) 6. ISO15765-4 CAN (11bit ID, 500 Kbaud) 7. ISO15765-4 CAN (29bit ID, 500 Kbaud) 8. ISO15765-4 CAN (11bit ID, 250 Kbaud) 9. ISO15765-4 CAN (29bit ID, 250 Kbaud) Software Platform: Android version: YMOBD, Car Scanner, Torque, Car Condition Master iOS: Torque Product size: 57x46.2x24.2mm Packing size: 100x63x25.5mm Weight: 38g YMOBD is the most powerful of the general OBD software, its functions cover all the OBD public protocol specifications. It is suitable for both Android and Apple phones. There are no charging functions and no ads. It is also one of the most user-friendly software. The user just need to install the software, open the software, plug in our device, and you can get the data of the car ECU. Not Any settings required (Bluetooth pairing, adapter selection, language selection, manual search and clicking the connect button, etc.) are not required, greatly improving the user's convenience. So far, the app is available in 24 languages: English，SimplifiedChinese，Spanish，Korean，Russian，Japanese，Italian，Hindi，Traditional Chinese, Portuguese, German, French, Dutch, Finnish, Polish, Bengali, Hungarian, Czech, Thai, Turkish, Malay, Romanian, Swedish and Danish.

A car voltage tester designed for checking the presence of voltage in the electrical circuits of cars and other vehicles. It is useful for tracing faults in lighting, fuses and wiring.Voltage range: 6–24 VUse: vehicle electrical systems

Voltage tester for checking vehicle electrical wiring. It lets you quickly determine whether voltage is present in a circuit, for example when checking fuses, bulbs, connectors and wires.Voltage range: 6–24 VApplication: vehicle electrical diagnostics

Flush stubborn clogs from cooling systems with the Cooling System Power Flush Gun Using compressed air and water, flush debris and from your system; With push-on or quick disconnect garden hose adapter (Old water hose that you can cut off the end will work, after cutting off the end you can connect to flushing tool by pushing it onto the outlet connector)) Squeeze trigger handle of coolant power flush gun to increase water flow and pressure; One-handed application in either left or right hand Coolant air bleeder nozzles include sizes 19mm, 29mm, 32mm, 36.5mm and 40mm Coolant flush gun outfitted with two connections for air and water adapters; Connect flush cooling system gun to shop air compressor and garden hose; Creates vortex of powerful cleaning Cooling system failure can lead to damage to your engine; This 33cm coolant flusher gun ensures coolant is flowing properly

Coolant vacuum refill kit is used for coolant vacuum filling and vacuum pressure testing. It needs to be used with a air compressor(not included). Coolant vacuum refill kit is equipped with 4 adapters of different sizes (OD 35mm, 40mm, 45mm, 55mm) and a universal rubber tapered plug adapter(OD range: 14-46mm), widely suitable for water tank of all kinds of vehicles, like cars, SUVs, vans and trucks. The adapter sleeve can be installed on the manifold body to seal the cooling system to help fill the coolant. Note: Please check if your radiator opening size matches the adapters. Tee fitting, manifold body, and control valve of the cooling system vacuum purge & refill kit are made of high-quality aluminum and brass, which is corrosion resistant, high hardness and good sealing, avoiding air leakage. The pressure gauge(Range:-1~0 Bar/-76~0 cmHg) is covered with rubber, shockproof and anti-drop. Its stable pointer provide you with accurate pressure measurement. Water tank leaks can be quickly detected. Cooling system vacuum purge & refill kit is equipped with a brass tee fitting with American air plug, which can be connected to vacuum pump for vacuumizing. The coolant filling hose is 60-inch long, which can be inserted into the manifold to refill the coolant. The rubber coolant filling hose is transparent and easy to observe. Its suction nozzele with filter net can isolate impurities. Coolant vacuum refill kit comes with a blow-molded plastic toolbox with inlay storage, which can be transported conveniently and quickly, and is safer to store and easier to organize. Note: Do not the kit while the coolant is hot, please wear goggles and gloves during operation. Be careful when opening the cooling system. The cooling system may spray hot coolant under pressure.

Suitable for diagnose blown gaskets, cracked blocks and cylinder heads Checks CO2 in cooling system and indicates it's presence by test fluid color change: Blue color->CO2 does not exists Green color->CO2 exists Yellow color->Large volume CO2 exists

Glow plug adaptors: L = 47 mm, M12 x 1.25 L = 64 mm, M10 x 1.25 L = 83 mm, M10 x 1 L = 91 mm, M10 x 1 L = 102 mm, M10 x 1 L = 113 mm, M10 x 1 L = 118 mm, M22 x 1.5 L = 119 mm, M10 x 1 L = 135 mm, M10 x 1.25 Dial gauge L= 340 mm, range from 0-1000 psi (0 - 70 bar) Screw adaptor L = 160 mm Injector adaptors: L = 63 mm, M24 x 2 L = 73 mm, M22 x 1.5 L = 75 mm, M20 x 1.5 L = 88 mm, M24 x 1.5 H fitting Bleed valve

Gauge range 0-70 kg/cm²; 0-1000 psi Injector adapters: M18 x 1.5 M24 x 1.5 M24 x 2.0 Adapters for glow plug: M10 x 1.0, L= 68 mm M10 x 1.25, L= 54 mm M10 x 1.25, L= 68 mm M12 x 1.25, L= 45 mm Applications: BMW, Mercedes-Benz, Carbodies, Mitsubishi, Citroen, Nissan, Peugeot, Daihatsu, Fiat, Renault, Ford, Rover, Seat, Toyota, Mazda, VW, Volvo, Vauxhall

1 pcs. Plastic cups holder with hook 6 pcs. Plastic cup 100 ml with fuel installation hose 6 pcs. Graduate with installation sleeve 6 pcs. Adapter BOSCH 6 pcs. Adapter SIEMENS 6 pcs. Adapter DENSO 6 pcs. Adapter DELPHI

The universal clamp meter is a digital measuring instrument designed for measuring various electrical quantities. For some measurement quantities, the meter can choose the range itself depending on the measurement result. The meter has been equipped with measuring clamps allow the measurement of alternating current in a single wire by the induction method. Thanks to this, it enables the measurement of much higher current than in the case of conventional electric meters. The clamp opens up to 25 mm and allows the measurement of a cable with a maximum diameter of 19mm. Clamp meter has an LCD display that allows you to display the max 1999 result. In addition, the DATA HOLD function allows you to save the currently measured value on the display Alternating voltage: U a.c. 0 – 450 V DC voltage measurement U d.c.: 0 - 600 V Alternating current: I a.c. 0 - 400 A Resistance: R 0 - 200 kΩ OHM Diode test: IF 1 mA Sampling frequency: 3 / SEC Circuit continuity test Diode test The sound signal allows easy verification of circuit continuity The meter is powered by two 1.5V (AAA) batteries (not included) The set includes test leads

App: UseePlus iOS/Android Lens: Single lens Pixel 2 million Camera Diameter: 8 mm Focusing range: 2-10 cm Viewing angle: 70° Photo / Video resolution: 1920 x 1440. Camera Temperature: -10 to +80 ℃ Operating temperature: 0 ℃ ~ 45 ℃. Waterproof level: IP67. Additional lighting: 8 LED lights Size: Cord Length:2 m / 6.5 ft 360° two-way rotation & HD clear - Enjoy a full 360° lens rotation with roller damping position for precise control The 8mm single lens and 2MP HD resolution deliver clear, detailed images and eliminate visual blind spots Advanced temperature monitoring - Equipped with a nanoscale temperature control sensor, it provides over-temperature for protection and real-time monitoring, guarantees safe operation in demanding environments IP67 Waterproof and Durable Design - The lens is fully waterproof (IP67) with thermal insulation and circuit for protection, making it best suited for harsh underwater pipes and other demanding conditions