Automotive service equipment
Battery tester
Test results show state of voltage, state of health,charging, actual CCA value, conductance value, internal resistance Time mode of test about 3 seconds For testing 12V batteries For testing 12V and 24V charging systems Battery cranking test, load test Battery charging test, ripple test Test results storage and review Truck only could test the 24V system, not the 24V battery Print test results and battery report on PC CCA range 40 - 1000 A (3-220Ah) Working temperature -20 °C +50 °C Multilanguage interface: English, French, German, Spanish, Italian, Polish USB interface
Battery tester
Battery voltage 12 V Supported batteries lead-acid AGM / GEL / SPIRAL / SLI and 12 V lithium batteries CCA test range 30 - 3000 A Voltage measurement range 7 - 30 V DC Starting system test 12 / 24 V Charging system test 12 / 24 V High-voltage protection QC fast test Test result storage by QR code Test data review up to 99 records Display 2.8" TFT color LCD with backlight Housing material ABS plastic Operating temperature -18 °C to +50 °C Important: 24 V refers to starting and charging system testing. The BAT-360 battery test itself is intended for 12 V batteries
Battery tester 1.5V and 9V
Tester for all types of batteries with a nominal voltage of 1.5V and 9V. 1.5V: AA, AAA, R03, SH16, MN2400, HP7, MN1500, UM3, C, HP11, MN1400, SO11, LR14, UM2 D, HP2, MN1399, SP2, R20, UM1; 9V: PP3, MN1604, 6F22, 006P It allows you to easily check whether the battery is suitable for use. The tester does not require power supply. The measurement is made by touching the battery poles with the metal tips of the tester. The measurement is performed under load, which makes it more reliable than measurement with a traditional multimeter. Thanks to its small size, it will fit in any cabinet or toolbox. green field with the word GOOD - the battery is suitable for use yellow field with the word LOW - the battery will run out soon red field with the words REPLACE, RECHARGE - the battery is at the end of its capacity and needs to be replaced with a new one
Bead booster 20l
Capacity 20 l Max pressure 10 bar Recommended operating pressure 6 - 8 bar Outlet air quick coupler Weight 11 kg Package dimensions 435 x 410 300 mm
Bead booster 40l
Capacity 40 l Max pressure 10 bar Recommended operating pressure 6 - 8 bar Outlet air quick coupler Package size 575 x 430 x 340 mm
Bead booster 7.5l
Capacity 7.5 l (2 gal) Max pressure 10 bar (145 psi) Recommended operating pressure 6 - 8 bar (87 – 116 psi) Outlet air quick coupler Works on tyre up to 24“ Weight 7 kg Package dimensions 570 x 200 x 190 mm
Bead breaker buffer for PL-1221/1227/1256. Spare part.
Bead breaker buffer for PULI PL-1221, PL-1227 and PL-1256 tyre changers. This spare part replaces a worn or damaged buffer to restore correct operation of the machine. Please check that your machine model matches before ordering.Brand: PULICompatibility: PL-1221 / PL-1227 / PL-1256Type: spare part
Bead breaker buffer with pot point for PL-1201/1211. Spare part.
Bead breaker buffer with pot point – a spare part for PULI PL-1201 and PL-1211 tyre changers. Intended to replace a worn or damaged buffer and restore proper bead breaker operation.Brand: PULICompatible with: PL-1201, PL-1211Part type: spare part
Bead breaker shovel protection cover for PL-1201/1211/1221/1227/1256. Spare part
Suitable for PL1201, PL1211, PL1221, PL1227 and PL1256
Bead pressing device
Bead pressing device used during tyre fitting to hold the tyre bead in the rim well and make mounting easier. Especially useful when working with stiff, low-profile tyres on a tyre changer.Application: tyre fittingType: bead pressing device
Bearing puller 2 jaw. European style - 60mm
This 2-jaw bearing puller (European style) is designed for pulling bearings, gears, pulleys and bushings off shafts. The jaws grip the part behind its edge, while the central screw presses against the shaft end and gradually draws the part off.Number of jaws: 2Design: European styleAvailable sizes: 20mm, 38mm, 60mm, 80mm, 90mm
Bearing roller tire repair tube patch tyre tool
Bearing roller Ø37mm Bearing roller thickness 4mm
Bearing roller tire repair tube patch tyre tool 36x40mm
Bearing roller for pressing down tire and tube repair patches after they have been applied. It helps the patch sit evenly on the surface and pushes air out of the bonded area for a reliable repair.Size: 36 x 40 mmApplication: tire and tube repair
Bearing separator 140mm (105-150mm)
Jaw capacity 140mm Spread 105-150mm Jaws - forged steel
Bearing separator 170mm (150-200mm)
Jaw capacity 170 mm Spread 150-200 mm Jaws - forged steel
Belt type oil filter wrench (Ø65-105mm)
Adjustable range: 65 – 105 mm Soft grip handle with twist adjuster
Bended brush for mounting paste 40mm
The angle brush is equipped with a long wooden handle and a removable brush head Thanks to the 45° angle of the rivet brush, even hard-to-reach surfaces can be worked on Dimensions: Length: 390 mm, Brush diameter: 40 mm, Bristle length: approx. 45mm, Brush Size:10
Blades set (10pcs) for glass scraper 39x200mm
Material SK 5 steel Blade width = 39 mm Blade height = 19 mm Working length = 200 mm Total length = 330 mm Designed for YT-1379
Blind bearing removal tool kit - small
Suitable for removal of a variety of blind bearings where traditional bearing and gear pullers will not reach Ball - end tips fit inside bearing races to provide traction for bearing extraction Ball end thread puller adapters (5.5, 6, 8 mm) - 6 pcs Bearing applications: 6004-6010; 6201-6206; 6300-6302
Blind inner bearing slide hammer puller 2jaw 12.5-53mm
Adjustable jaws width: 12.5 - 53 mm Used for removing many bearings and bushings Features a rust resistant finish A handle for use with hammer
Bluetooth car scanner OBD2
Communication method: Bluetooth 4.0 Main control chip: MM32L073 Software platform: Support Android /Windows/IOS Working voltage: 12V working current 32mA Working temperature: 40℃~80℃ Working humidity: less than 60% Features: 1. Small size, highest chip integration, own independent appearance patent, utility model patent and software copyright 2. The software can perform the following operations: Read error diagnosis codes-general and manufacturer-specific, and display their meaning (the database has more than 3000 common code definitions) Clear the error code and turn off the MIL ("Check Engine" indicator) Display current sensor data, including: engine speed per minute (RPM), calculated load value, coolant temperature, fuel system status, vehicle speed short-term fuel condition, long-term fuel condition, intake manifold pressure, fuel injection lead time, inlet Air temperature, air flow rate, absolute throttle position, oxygen detection voltage associated with short-term fuel status, fuel system status, fuel pressure, fuel consumption monitoring, and many other data Protocols Supported By OBDII: 1. SAE J1850 PWM (41.6Kbaud) 2. SAE J1850 VPW (10.4Kbaud) 3. ISO9141-2(5 baud init, 10.4Kbaud) 4. ISO14230-4 KWP (5 baud init, 10.4 Kbaud) 5. ISO14230-4 KWP (fast init, 10.4 Kbaud) 6. ISO15765-4 CAN (11bit ID, 500 Kbaud) 7. ISO15765-4 CAN (29bit ID, 500 Kbaud) 8. ISO15765-4 CAN (11bit ID, 250 Kbaud) 9. ISO15765-4 CAN (29bit ID, 250 Kbaud) Software Platform: 1. Compatible software Window version: ScanMaster-ELM, ScanTool.net, PCMSCAN, etc.; Android version: Torque, DashCommand, OBD Car Doctor, Auto Doctor, Mini OBDII, EOBD, etc.; Symbian version: OBDScope iOS: Torque 2. Compatible platforms Software support platform: Windows XP, Windows 7/8/10, Android, Symbian and other systems Product size: 57x46.2x24.2mm Packing size: 100x63x25.5mm Weight: 38g