Automotive service equipment
Plastic Push-Type Clip Assortment (415pcs) Ford
The set consists of the 18 types car clips for Ford 10 pcs locator (151.1168), 40 pcs clips (151.1057), 15 pcs light fixed clips (151.1198), 30 pcs thermal baffle clips (151.1420), 50 pcs quick clips (151.1223), 15 pcs door locator (151.1213), 10 pcs wheel fender locator (151.1674), 40 pcs clips (151.1277), 10 pcs locator (151.3111), 15 pcs locator (151.0137), 20 pcs locator (151.1603), 20 pcs car bumper fixed clips (151.3138), 50 pcs sealing clips (151.0247), 15 pcs clips (151.1282), 20 pcs clips (151.1733), 40 pcs hood insulation layer locator (151.0251), 10 pcs fixed clips (151.1286), 5 pcs fixed clips (151.1281)
Plastic Push-Type Clip Assortment (418pcs) Honda
The set consists of the 18 types car clips for Honda 50 pcs sealing locator (151.0228), 15 pcs clips (151.3157), 15 pcs car body locator (151.1131), 25 pcs clips (151.0357), 30 pcs car engine bonnet locator (151.1256), 15 pcs locator (151.0476), 30 pcs locator (151.0137), 30 pcs clips (151.1103), 8 pcs car bumper locator (151.1121), 20 pcs door clips (151.0041), 5 pcs radiator clips (151.1111), 40 pcs sealing locator (151.2892), 15 pcs locator (151.1134), 30 pcs clips (151.0211), 20 pcs locator (151.1276), 20 pcs engine hood insulation layer locator (151.0258), 20 pcs car roof clips (151.1575), 30 pcs car body clips (151.1215)
Plastic Push-Type Clip Assortment (475pcs) Mazda
The set consists of the 18 types car clips for Mazda 25 pcs locator (151.0137), 15 pcs car body clips (151.0795), 15 pcs car bumper and wheel arch cover (151.1262), 25 pcs clips (151.0398), 20 pcs locator (151.0174), 50 pcs clips (151.0292), 20 pcs locator (151.1046), 55 pcs sealing clips (151.0278), 50 pcs sealing locator (151.0234), 30 pcs thermal baffle clips (151.1420), 15 pcs fixed clips (151.1395), 5 pcs bumper cover locator (151.3177), 20 pcs right clips (151.0339), 20 pcs left clips (151.0333), 5 pcs bumper cover locator (151.1126), 20 pcs clips (151.0259), 30 pcs hood insulation layer locator (151.0201), 55 pcs hood insulation layer locator (151.0251)
Plastic Push-Type Clip Assortment (620pcs)
16 kinds of common size Suitable for for the trim panel clips, door trim clips, door panel clips, bumper clips, fender clips, engine cover and splash shield retainers replacement. Great for GM, Ford, Chrysler, Toyota, Honda, Nissan, Mazda, Chevy, etc.for the cars that the size and shape fit your requirements. Car retainer push clips kit are made of high quality nylon. Rugged, shock resistant, resistant to cracking or cracking. Additionaly plastic fastener remover for easy removal of door panel clips without causing damage
Plastic scrapers set 4pcs
Width of scrapers 19, 22, 25, 37.5 mm Length = 265 mm Impact resistant nylon
Plastic tool box 445x320x170mm XCUBE100
Strong case made of high-quality plastic Designed for storage and transportation of tools and accessories. The WORCRAFT XCUBE100 tool box is characterized by improved ergonomics and stability. The size of the case is 445 x 320 x 170 mm. Combined system XCUBE This is a convenient and reliable solution for storing your tool. Boxes can be stacked on top of each other with the possibility of fixing them together using special side clips Compatible with other boxes in the XCUBE series, as well as with the XCUBE200 carrying platform. Using the boxes in conjunction with the XCUBE200 Platform makes transportation more convenient thanks to the rubberized wheels
Platform with wheels for plastic tool boxes 467x355x40mm
WORCRAFT XCUBE200 is part of the combined XCUBE system. Helps to easily move tools around the construction site and other areas without any extra effort. Functional addition to the XCUBE system - 5 compartments for small parts - Platform dimensions 467 x 355 x 40 mm Combined system XCUBE This is a convenient and reliable solution for storing your tool. Boxes can be stacked on top of each other with the possibility of fixing them together using special side clips. Compatible with other boxes in the XCUBE series. Using the boxes in conjunction with the XCUBE200 Platform makes transportation more convenient thanks to the rubberized wheels.
Pliers for axle boot clamps
Suitable for stainless steel hose clamps Can be used with tool 3/8" drive
Pliers for clamps 0-40mm
Used for tightening clamps, spring steel cable ties Particularly useful in tight spaces Knurled wheel for pre-tensioning Jaw opening range 0 - 40 mm Tool holder size 14 mm HEX and 3/8" (9.5 mm) ratchet
Pneumatic - hydraulic jack 40t/20t
Capacity 40 t / 20 t Min height 190 mm Lift 40 t - 106 mm, 20 t - 88 mm Extension height 75 + 45 mm Air preasure 0.6-0.8 Mpa Rated preasure 32 Mpa Weight 62 kg Package sizes 840 x 300 x 270 mm & 1390 x 280 x 110 mm
Pneumatic brake bleeder with filler system and adapters
This brake bleeder kit is used for changing brake and clutch oil, as well as suck out old oil and air from replaced brake system on motorcycle car truck and pickup Connect the extractor to the air compressor and brake caliper, turn on high power air compressor to 90-120PSI, negative pressure is generated in the braking system to suck out the waste fluid and air, and guide the new oil to fill the whole brake system Automatic brake oil refill device: there is a long screw fittings on 0.75L refill bottle cap, which can work with the master cylinder adapter to snap on the mouth of the vehicle's brake fluid reservoir, without hand support Fully open the valve on the long screw, the fluid will flow out, and stop once the brake fluid level in the reservoir has been sufficient to cover the threaded port, no need to keep an eye on it On the 1L waste oil extractor bottle, there is a the hanger which can hook on the engine hood and keep the bottle above the vehicle bleeder valve, as well as the trigger locker is also helpful for hand-free when suck Also, you do not need to tread the brake pedal again and again when use this brake and clutch bleed tool The brake system bleeding tool kit includes 4 master cylinder adapters for most vehicle models, 21 to 30 mm, 24 to 32 mm, 28 to 37 mm, 32 to 41 mm 2 types 1/4"-18NPT air quick plugs, American style and European style 1.8 m long transparent hose is good for monitoring the working situation easily, with universal black tapered nipple for connecting caliper bleeder valve threads Inlet pressure 6 - 8 bar Tank capacity 0.75 l Air consumption 180 l / min Vacuum 60 % External connector 1/4"
Pneumatic dent puller with suction cups
The pneumatic dent puller has a compressor universal interface and the suction cup can achieve strong and stable suction It is suitable for repairing dents on various flat surfaces, such as car bodies, refrigerators, washing machines, and other sheet metal equipment Instantly removes most dents without damaging paint The air pneumatic dent puller can protect the original color of the car and restore the car to its original state Requires air compressor - no drilling, welding or sanding required The pad must work with a dent with a round, and smooth surface, so that the vacuum can be formed and the pad will be sucked easily A vacuum creates an underpressure and the suction disks stick to the bodywork allowing dents to be easily pulled out Pneumatic regulation via ball valve Special design on slide hammer reducing shake when operating Includes: Slide hammer 1.36 kg / 3 LBS and handle 500 mm length 3 pcs suction pads size: 75, 100 and 125 mm A hook Shut off valve 1/4" air plug Working pressure 5 - 12 bar (70 - 170 PSI)
Pneumatic diesel injector puller set 27pcs
Pneumatic hammer with external thread M18x1.5 An air supply of 6-8 bar is required By using pneumatic power, the injector can be extracted without the use of an inertia hammer or mechanical extractor. The kit comes with a pneumatic tool that uses vibration and 20-30Nm torque to remove overtightened and stuck injectors. Pneumatic injector extractor kit. Includes extractor and multiple adapters, compatible with a variety of injectors. With 3 pull hooks (opening 12mm/13.5mm/16mm) for pulling out relatively deep-positioned injectors, making them easier to pull out. The tool kit is carefully designed, durable and high precision, which can easily remove tight fuel injectors, reduce labor time and improve the efficiency of vehicle maintenance tasks. Each tool has been tested for multiple real vehicle repairs. The dimensional accuracy is higher and it is very suitable for your vehicle. Included: 1 pc. Diesel injector pneumatic hammer 1 pc. Air hose with EU plug 19 pcs. Knockout adapters M8-M31 3 pcs. Pull hooks 12, 13.5, 16 mm 3 pcs. Extensions for knockout adapters For fast and safe removal of diesel injectors (Bosch, Delphi, Denso and Siemens).
Portable air tire inflator 12l aluminium
Capacity 12 l (3 gal) Max pressure 10 bar (150 psi) Recommended operating pressure 6 - 8 bar (87 – 116 psi) Outlet air quick coupler Works on tyre up to 24“ Weight 4.8 kg Package dimensions 820 x 168 x 340 mm
Portable tool bag 18"
Like SATA tools, SATA portable tool bags embrace everyday challenges A reliable tool storage idea, these portable and lightweight tool bags are perfect for technicians, general contractors, electricians, woodworkers and maintenance personnel With a rugged, soft-sided construction, the multipurpose tool kit storage bags are the ideal weatherproof tool organizer Backpack style is ideal for everyday, hands-free use Integrated handle on the outside of the bag is easy to grab Interior and exterior pockets provide a variety of storage and organization options Made of durable woven material to withstand even the toughest job site
Position pick-up board for PL-1152
Position pick-up board supplied as a spare part for the PULI PL-1152 wheel service machine. Used to replace a worn or damaged board so the machine can again correctly detect the wheel position during operation.Brand: PULICompatible model: PL-1152Type: spare part
Power board for PL-1120/PL-1150/PL-1152/PL-1820/PL-1897 (spare part)
Power board – a spare part for PULI wheel service machines PL-1120, PL-1150, PL-1152, PL-1820 and PL-1897. Intended to replace a faulty board and restore the machine's electronics.Brand: PULICompatible with: PL-1120, PL-1150, PL-1152, PL-1820, PL-1897Part type: spare part
Power board for PL-1500. Spare part
A power board for the PL-1500 wheel service machine – spare part. The board supplies power to the machine's electronics and should be replaced if it is damaged. Please check your machine model before purchase; repairs are best carried out by a qualified technician.Type: power boardCompatibility: PL-1500