Automotive service equipment
Cylinder assembly unit 3t for T830023
Cylinder assembly supplied as a spare part for the TONGRUN T830023 3 t jack. Used to replace a worn or damaged cylinder assembly, restoring the jack to working order so it can again be used for lifting vehicles.Brand: TONGRUNCompatible model: T830023Jack capacity: 3 tType: spare part
Cylinder assembly unit 3t for T830023T
Hydraulic cylinder assembly for the 3 t TONGRUN T830023T jack. This spare part replaces a damaged or worn cylinder and restores the jack's lifting function without replacing the whole jack.Brand: TONGRUNCapacity: 3 tCompatible with: T830023TPart type: spare part
Cylinder assembly unit 3t for T830025
Hydraulic cylinder assembly for the 3 t TONGRUN T830025 jack. This spare part replaces a damaged, worn or leaking cylinder to restore the jack to working order.Brand: TONGRUNCapacity: 3 tCompatible with: T830025Part type: spare part
Cylinder assembly unit 3t for T83003C
Cylinder assembly unit – spare part for the TONGRUN T83003C jack with 3 t capacity. Used to replace a damaged or worn cylinder and restore the jack to working order without replacing the whole jack.Brand: TONGRUNCompatibility: T83003C jackCapacity: 3 t
Cylinder assembly unit 3t for T83508
Hydraulic cylinder assembly for the TONGRUN T83508 jack – spare part. The cylinder is the main working part of the jack and should be replaced if it is damaged, leaking oil or no longer lifts the load.Brand: TONGRUNCapacity: 3 tCompatibility: T83508
Cylinder for garage jack T830018/T83001. Spare part
Cylinder supplied as a spare part for TONGRUN T830018 and T83001 garage jacks. Used to replace a worn or damaged cylinder, restoring the jack to working order so it can again be used for lifting vehicles.Brand: TONGRUNCompatible models: T830018, T83001Type: spare part
Cylinder for motorcycle lift jack 400kg. Spare part
Cylinder – spare part for a TONGRUN motorcycle lift jack with 400 kg capacity. Used to replace a damaged or worn cylinder so the lift can again raise and hold the motorcycle safely.Brand: TONGRUNApplication: motorcycle lift jackCapacity: 400 kg
Cylinder for professional garage jack T83502. Spare part
Cylinder for the T83502 professional garage (trolley) jack. This spare part replaces a worn or damaged cylinder, restoring the jack to working order without replacing the whole unit. Please check that your jack model matches before ordering.Brand: TONGRUNCompatibility: T83502 garage jackType: spare part
Cylinder for trolley jack 2t T820050
Cylinder supplied as a spare part for the TONGRUN T820050 2 t trolley jack. Used to replace a worn or damaged cylinder, restoring the jack to working order so it can again be used for lifting vehicles.Brand: TONGRUNCompatible model: T820050Jack capacity: 2 tType: spare part
Cylinder for trolley jack T825010C with rotating handle. Spare part
With rotating handle
Cylinder for trolley jack TA820011. Spare part
Cylinder supplied as a spare part for the TONGRUN TA820011 trolley jack. Used to replace a worn or damaged cylinder, restoring the jack to working order so it can again be used for lifting vehicles.Brand: TONGRUNCompatible model: TA820011Type: spare part
Cylinder head leakage tester
Suitable for diagnose blown gaskets, cracked blocks and cylinder heads Checks CO2 in cooling system and indicates it's presence by test fluid color change: Blue color->CO2 does not exists Green color->CO2 exists Yellow color->Large volume CO2 exists
Cylinder honing tool 32-89mm
Cylinder honing tool with a working range of 32–89 mm. Used for finishing the inner surface of engine cylinders and other cylindrical bores – removing minor irregularities and preparing the surface after repair.Working range: 32–89 mmApplication: honing cylinders and boresCategory: engine repair tools
Cylinder honing tool 51-177mm
Cylinder honing tool for treating the inner surface of engine cylinders, for example after replacing piston rings or during engine repair. The tool is mounted in a drill and helps restore the cylinder wall surface.Cylinder diameter: 51–177 mmApplication: engine repair
Cylinder liners extractor tool 3 jaw
Suitable for cylinder liner 60-160 mm Cylinder liner puller complete with support brace. Wet heavy-vehicle (e.g. Mercedes Benz, MAN) cylinder liners, automobile and stationary-engine liners, and other parts may be extracted using this puller Operation: The spindle of the counter-support brace is screwed into the clamping nut of the puller, and the puller inserted into the liner. The counter-support brace is placed on to the cylinder block. Due to the newly-developed spreading system, when the spindle is turned, all three jaws spread quickly and without difficulty, until they are firmly seated beneath the edge of the liner. Then the nut of the counter-support brace is tightened.
Damaged glow plug removal & cleaning set 22pcs
Designed to remove damaged/broken glow plugs from cylinder heads Set includes all required adaptors, centring and cleaning tools to safety remove the glow plug without damaging the engine 1 pc. Drill Ø 2.5 × 120 mm 1 pc. Drill Ø 3.3 × 140 mm 1 pc. Special tap M3 x 0.5 1 pc. Special tap M4 x 0.7 5 pcs. Glow plug extraction adaptors 7 pcs. Drill/tap guides M8×1.0; M10×1.0; M10x1.25; 1/4" - 28UNF 3 pcs. Threaded pulling rods 3 pcs. Threaded pulling rod ends
Dent puller / vacuum suction lifter 1x123mm (aluminium)
Carrying capacity 30 kg Material Aluminum alloy Glass holder with plastic lid
Dent puller / vacuum suction lifter 2x123mm (aluminium)
Carrying capacity 80 kg Material Aluminum alloy Glass holders with plastic lids
Dent removal kit
Offers the ability to easily and effectively remove dents The dent repair effect is immediate The product does not leave any traces The device is made of high-quality materials, with attention to detail and precision of workmanship, ensuring long and effective work of the tool The use will not damage the paintwork thanks to the soft but durable rubber stands and adapters The kit includes a spatula to remove hot glue residues, designed so as not to damage the paintwork 1 pcs gold PDR puller for dent removal 33 pcs adapters, mushrooms 6 pcs PDR hot melt glue sticks (3 pcs yellow 11 x 170 mm, 3 pcs black – 11 x 200 mm) 1 pcs 100 ml glue bottle with a convenient atomizer 1 pcs spatula to remove the glue
Dent removal kit
Provides the ability to easily and effectively remove dents The tool is made of high quality materials with attention to detail and precision of work, ensuring long and efficient operation of the tool The use of soft but durable rubber stands and adapters will not damage the paint The kit includes a putty to remove hot glue residue Bridge with brackets Hot glue gun 6 different sizes of interchangeable adapters A spatula Degreasing bottle 5 sticks of hot glue
Diesel engine compression tester kit
Glow plug adaptors: L = 47 mm, M12 x 1.25 L = 64 mm, M10 x 1.25 L = 83 mm, M10 x 1 L = 91 mm, M10 x 1 L = 102 mm, M10 x 1 L = 113 mm, M10 x 1 L = 118 mm, M22 x 1.5 L = 119 mm, M10 x 1 L = 135 mm, M10 x 1.25 Dial gauge L= 340 mm, range from 0-1000 psi (0 - 70 bar) Screw adaptor L = 160 mm Injector adaptors: L = 63 mm, M24 x 2 L = 73 mm, M22 x 1.5 L = 75 mm, M20 x 1.5 L = 88 mm, M24 x 1.5 H fitting Bleed valve