Product catalog
Hand riveter with rotary head
For stainless steel rivets Ø 3.2, 4.0, 4.8, 6.4 mm L= 328 mm Steel CrMo
Hand taps P6M5 DIN352 3pcs. - M8x1.25
A set of three hand taps for cutting metric internal threads with a hand tap wrench. The taps are used in sequence to cut the thread gradually and achieve a clean thread profile.Material: P6M5 (high-speed steel)Standard: DIN 352Set: 3 pcsAvailable sizes: M5x0.8, M6x1.0, M7x1.0, M8x1.25, M10x1.5, M12x1.75
Hand valve for PL-1211. Spare part.
Hand valve – a spare part for the PULI PL-1211 tyre changer. Intended to replace a damaged or worn valve and restore correct control of the machine's pneumatic functions.Brand: PULICompatible with: PL-1211Part type: spare part
Hand winch - 450kg; 4.1:1; 10m
Hand winch for pulling, tensioning and securing loads, for example loading a boat onto a trailer or moving heavy objects. It is operated with a hand crank and needs no electricity. Depending on the model, the winch has one or two gear ratios.Available versions (load; gear ratio; length): 450 kg; 4.1:1; 10 m / 900 kg; 4.1:1 and 9.8:1; 10 m / 1100 kg; 4.1:1 and 9.8:1; 10 m / 1361 kg; 5.1:1 and 12.2:1; 10 m
Hand winch 1100kg
Capacity 2500 lbs / 1100 kg Colour belt Belt size 2.0m m x 50 mm x 8 m Gear ratio 4.1:1 & 9.8:1 Overall dim. 540 x 310 x 220 mm Weight 5.1 kg
Handles kit for peg board panel 10pcs
Handles kit for peg board panels SATA Set contains: 10 pcs Hooks (5 short and 5 long) 2 pcs Brackets 1 pcs Bottle holders
Head for Cordless grass trimmer, CGT-S20LiD Spare part
Trimmer head supplied as a spare part for the WORCRAFT CGT-S20LiD cordless grass trimmer. Used to replace a worn or damaged head so the trimmer can again cut grass along edges, fences and in hard-to-reach places.Brand: WORCRAFTCompatible model: CGT-S20LiDType: spare part
Headlight adjusting tool 300mm
Tool specifically designed for adjusting the headlights Applications: for Audi A4 (8K), A6 (4G), A5 (8T) & Volkswagen Passat and Touareg Number of flutes: 12 Handle: 300 mm long
Headlight polish kit MANNOL
A kit for a complete headlight upgrade, nothing extra to buy Usage: clean the headlight with plain water, wrap a strip around the lamp to avoid damaging the body Moisten the lamp and sand, starting with 800 grit sandpaper, then 1200 and finally 2000 (use all several times with each time the lamp is moistened) Continue polishing with paste and orange sponge Finally, apply UV protection with a white sponge, polish for about 1 minute and allow to dry Leave for 2 hours for complete drying The polishing disc can be used with a cordless screwdriver
Headlight restoration kit 15pcs
2 pcs. 3ml UV Protection Liquid 2 pcs. Sanding Disc P800 2 pcs. Sanding Disc P1200 2 pcs. Sanding Disc P2000 1 pc. 85g Polish Paste 1 pc. Masking tape 1 pc. Orange Sponge Disc 1 pc. Cleaning colth 1 pc. Polishing pad M10 with thread 1 pc. Adaptor 1 pc. Instruction manual
Hearing protectors SNR 27dB
Protection level 27 dB Type B020 EN 352-1:2002 CE conformity
Heat-shrink tubing set 100pcs with tin
A quick and easy way to make a permanent and waterproof connection of electrical wires A set of transparent heat shrink tubing with a tin ring in the middle and two rings of thermal glue on the sides, which additionally seals the connection For conductors with a cross-section of: 0.25-6 mm2, 24-10 AWG Tube length: 27 - 40 mm Inner diameter tubes: 1.7, 2.7, 4.5, 6 mm Tube diameter white 25 PCS, red 35 PCS, blue 30 PCS, yellow 10 PCS Melting point of the solder: 105° C Sheath shrink temperature: 80° C
Heat-shrink tubing set 127pcs
30 pcs. 2.0 x 40 mm 25 pcs. 2.5 x 40 mm 20 pcs. 3.5 x 40 mm 20 pcs. 5.0 x 40 mm 16 pcs. 7.0 x 80 mm 8 pcs. 10.0 x 80 mm 8 pcs. 13.0 x 85 mm Max temperature 125° C Max voltage 600 V
Heat-shrink tubing set 200pcs with copper
A set of crimped sleeve connectors mounted on a heat shrinkable tube will find its application primarily in places where too high ambient temperature may adversely affect the connection of wires by traditional soldering (e.g. in the engine compartment) The copper connector, when properly crimped, guarantees the highest conduction parameters, and thanks to the two-layer heat-shrinkable tube mounted on the connector, we gain a hermetic connection and there is no need to use traditional sleeves or insulating tape For conductors with cross-section: 0.5-6 mm2, 20-10 AWG Connector material: copper Heat-shrinkable tube material: PE and a layer of hot-melt adhesive on the inside Color red 90 PCS, blue 90 PCS, yellow 20 PCS Sheath shrink temperature: 80° C
Heating torch 232
Used gas: propane-butane, methane Rate of heat flow (propane-butane / methane): 68 / 46 KW L = 560 mm Hose ø 9 mm
Heating torch 232U
Used gas: propane-butane, methane Rate of heat flow (propane-butane / methane): 68 / 46 KW L = 870 mm Hose ø 9 mm
Heavy duty air duster kit
Blow gun with 120 mm steel nozzle Coiled hose 5 m, PU T shape quick connector Ø 6 / Ø 8 mm T shape quick connector with bronze ball automatic shut off valve T shape quick connector can be installed on the truck cabin Max pressure 10 bar
Heavy duty air duster kit
Blow gun with 120 mm steel nozzle Coiled hose 5 m, PU T shape quick connector Ø 6 / Ø 8 mm T shape quick connector with bronze ball automatic shut off valve T shape quick connector can be installed on the truck cabin Max pressure 10 bar
Heavy duty air stripping tool (with rubber stripping wheel)
For removal of pinstriping, stickers, decals, adhesive tapes and glue from metal, glass, fiberglass and wood surfaces without damaging the sub-surface Stripping wheel is made from rubber Stripping wheel diameter 87mm, thickness 15mm Free speed 4000 RPM Air inlet (PT)1/4", Air hose (ID) 3/8” Exhaust - rear, adjustable 360° Adjustable 4 speed regulator Average air consumption 141.58 l/min Working pressure 6.3bar
Heavy duty end cutting pliers 150mm
Heavy duty cutting edges treated with additional induction hardening Polished head resists rust and corrosion Professional, ergonomic grips wipe clean easily Perfect for pulling out and cutting nails Meets or exceeds ASME B107.500 Size: 150 mm (6") Overall width: 47 mm
Heavy duty end cutting pliers 200mm
Heavy duty cutting edges treated with additional induction hardening Polished head resists rust and corrosion Professional, ergonomic grips wipe clean easily Perfect for pulling out and cutting nails Meets or exceeds ASME B107.500 Size: 200 mm (8") Overall width: 47 mm
Heavy duty flexible hose clamp for VAG 2.0TDI
For replacement of fuel, oil and water hose Hose clamp with flexible wire and locking function Convenient for working hidden areas and long distance For VAG 2.0TDI and other models Key Features: ✓ Heavy Duty Construction
Heavy duty pipe vice - Max pipe diam 10-90mm
Foldable vice For holding pipes while cutting or threading Cast iron body with jaws made of hardened steel
Heavy duty pump oiler 250cc
Heavy duty pump oiler for precise application of oil to mechanisms, bearings, chains and other moving parts. The pump action lets you dispense oil exactly where needed, including hard-to-reach points.Brand: CHANGLU TOOLSCapacity: 250 ccType: pump oiler