Product catalog
Front hub nut 1" dr. socket 80mm SCANIA
1" dr. socket 80 mm, 8 point Can be used with air tool 1" drive
Front hub nut socket 80mm 8pt. SCANIA
Socket 80 mm, 8 point Drive tool size 41 mm HEX Can be used with air tool drive
Front wheel drive bearing kit
For servicing wheel bearings and hubs directly on vehicle without removing the coil spring or knuckles Extra long pressure nut for increased loading Ball bearing pressure plates 55.5, 59, 62, 65, 66, 71.5, 73, 78, 84 mm Puller bell 76 mm, 86 mm, 91 mm Hub Screws M12 x 1.5 mm Hub Screws M14 x 1.5 mm Spindle Packing Plastic box
Fuel (petrol) injector cleaner and tester
The fuel injector tester is a mechatronics product that combines ultrasonic cleaning technology and microcomputer oil pressure closed-loop control cleaning and detection technology. This product simulates various operating conditions of the engine and cleans and inspects the fuel injectors of various automobiles and motorcycles. This equipment is the necessary and preferred equipment for the automobile and motorcycle repair and maintenance industry. Ultrasonic cleaning uses the penetrating and cavitation shock waves generated when ultrasonic waves propagate in the medium, and powerfully clean objects with complex shapes, cavities, and pores to completely remove stubborn carbon deposits on the fuel injector, and can test the leak, uniformity, and inhalation of the injectors. Discharging fluid faster. The injector cleaning machine has an injector diagnostic function. It can be used for cleaning and testing four injectors at the same time. This function is to detect the atomization, dripping, blockage, and fuel injection angle status of the fuel injectors and the size and balance of the fuel injection of each fuel injector at different speeds. The fuel injector cleaner tool has 11 main functions: Ultrasonic Cleaning; Medium Speed Test; High Speed Test; ldle Speed Test; Accelerating Test; Variable Speed Test; Leakage Test; ldle Spray Volume; Medium Spray Volume; High Spray Volume; Unit Info. Note: Please refer to the instructions for specific methods and steps. Working enviroment parameters: Power supply: 220V±10% Frequency: 50Hz Relative humidity: <85% Environment temperature: 0℃～＋40℃ External magnetic field strength: <400 A/m No open flames are allowed around Technical parameters Tank capacity:1300 ml Range of rotation:0 - 7500 r/min PWM pulse width:0～20.0ms step 0.1 ms Time:0～20 min Cleaning frequency:40 kHz Cylinder volume:100 ml Injection times:0～9900 times, step 100 ms System pressure:0～0.6 Mpa Ultrasonic cleaning power: 70W Package dimensions: 340 x 295 x 360 mm
Fuel and AC disconnect tool set (3pcs)
Suitable for most Ford, GM, Mazda and other models Also applicable to Chrysler and Ford A/C circuit adapters Also used for other purposes
Fuel extractor pump 12V 30L/min
Voltage 12 V Power 100 W Capacity 30 l/min Outlet BSPF 3/4" (26.44 mm) RPM 3200 Working temperature -10°C - +40°C Current 10A IP54 Noise level ~70 dB Weight 3.3 kg Dimensions 280 x 180 x 180 mm Do not use this pump for more than 20 minutes at a time. The pump is suitable for the following liquids: gasoline, diesel, kerosene and mineral spirits If you plan to use it to pump other liquids, first consult with the seller
Fuel pressure test kit 10pcs.
1 pcs. Pressure gauge, measuring range 0 - 100 PSI, 0 - 7 bar 2 pcs. Rubber hose with fittings, L = 300 mm 1 pcs. Rubber hose with fittings, L = 220 mm 1 pcs. 1/4" Adapter 1 pcs. 3/8" Adapter 2 pcs. Hose clip 2 pcs. Rubber hose
Fuel synchronisation kit (mini)
The most comprehensive balancer sets available on the market Features a bank of four mini-gauges with lockable valves enabling to hold vacuum values For 2-4 carburetor synchronisation 4 pcs. Synchronizer gauges 2“ with fixed plate (Max 76 cmHg) 4 pcs. Rubber hose 8 x 5 x 950 mm 4 pcs. Tube extended M5 x 0.8 x 169 mm 4 pcs. Tube medium M5 x 0.8 x 100 mm 4 pcs. Tube M5 x 0.75 x 53 mm 1 pcs. Tube Ø 6 x 55 mm 4 pcs. Tube M6 x 0.75 x 53 mm 4 pcs. Tube M6 x 1.00 x 60 mm
Fuel synchronisation kit for car and motorcycle
For 2-4 carburetor synchronisation 4 pcs. Synchronizer gauges 3-1/2" with fixed plate 4 pcs. Rubber hose 8 x 5 x 750 mm 4 pcs. Tube of extension 3.9 x 52 mm 4 pcs. Tube of extension 3.9 x 122 mm 4 pcs. Tube 10 x 53 mm (M6 x 0.75) 4 pcs. Tube 10 x 60 mm (M6 x 1.0)
Fuel system, nozzle cleaning/testing set. 35pcs
Multifunctional fuel injection cleaner tool this injector cleaner tool can clean the entire fuel system, including the throttle valve, fuel nozzle and combustion chamber At the same time, it also has a high and low pressure cleaning function to help you better complete the fuel system cleaning job One engine has an oil return pipe, and the other engine does not have an oil return pipe (quick-connect anti-corrosion, anti-friction joints and anti-friction pipes for all cleaning fluids Adjustment of throttle mode of fuel injector cleaning kit the connection method is the same, just adjust the air source pressure to 1 - 5 psi. How to identify the inlet and return hoses: 1. generally speaking, the larger the inlet pipe, the smaller the return pipe; 2. there is always a filter interface on the side of the inlet hose and a buffer interface on the return side; 3. there is an arrow on the hose indicate the fuel flow direction Widely applicable engine cleaning tools this injector cleaning tool set is widely used in almost all types of cars and light trucks, and has a complete set of accessories, including various adapters (such as: one-way valve, dedicated to gas sealing and durable pressure regulator, anti-friction hose, etc.) Notes for fuel system cleaning adapter kit this product does not contain cleaning fluid
Fuel/ Oil/ Diesel filter for pump
High performance fuel filter. Performance up to 100 liters per minute. Permeability 5 μm or 10 μm depending on the element. Connections: in/out 1". Suitable for all types of diesel fuel and oil filtering. Maximum Flow: 15 GPM Maximum pressure: 50 PSI, 3.4BAR Thread: 1" x 2.0mm - Inner hole diameter 30.75mm Filter mesh: 30 microns The inner diameter of the flow to the filter is 28 mm External connection thread of the filter base ~ 37 mm / 1.50
Fuel/AC disconnect tool set 8pcs
Tool set for disconnecting quick-connect couplings on fuel and air conditioning lines. The different-sized release tools let you separate the connections safely without damaging the pipes or retainers.Brand: YATOQuantity in set: 8 pcsApplication: fuel and A/C systems
Full automatic air inflator
Voltage 220 - 240 V Power 22 W Air inlet pressure 4 - 10 bar Air output pressure 1 - 7 bar Max flow rate 400L/min (10 bar) Precision ±0.5 % Inflation hose Ø 13 mm, L= 10 m LED screen 58 x 26 mm Dimensions 220 x 210 x 410 mm Manual
Full automatic air inflator for truck
Full automatic air inflation and discharge function Protection grade IP54 Waterproof design Voltage 220 - 240 V Power 32 W Air inlet pressure 4 - 10 bar, 10 - 16 bar Air output pressure 1 - 7 bar, 7 - 13 bar Max flow rate 400 L/min (10 bar) Precision ±0.5 % Inflation hose Ø 13 mm, L = 10 m LED screen 86 x 39 mm Dimensions 246 x 90 x 615 mm
Funnel curved
Funnel with a diameter of 21 cm with a strainer and a stiff tip For fuel, oil and other operating fluids Particularly useful when servicing trucks and agricultural machines, e.g. tractors, harvesters
Funnel curved
Curved funnel for filling engine oil, coolant, fuel and other service fluids. The curved shape makes it easier to pour into hard-to-reach or side-mounted filler openings and reduces the chance of spills.Shape: curvedUse: filling oil and fluids
Funnel straight
A straight funnel designed for pouring oil, fuel, coolant and other technical fluids without spilling. It is useful for oil changes and topping up fluids in cars, machinery and the workshop.Shape: straightUse: pouring oil and technical fluids
Funnel with adapters
Funnel with adapters for filling engine oil, coolant, fuel and other service fluids. The adapters help fit the funnel to filler openings of different sizes, so fluid can be poured in without spilling.Includes: funnel with adaptersUse: filling oil and fluids
G80 two leg chain sling - 2t, 2m x 8mm
One TH-33 master link+ four TH-74 connecting link+ two leg chain+ two TH-40 swivel hook with latch
Gacket scraper 250mm
Removes pieces of old gasket, sealant and hardened oil from engine parts, cylinder heads, valves and carburettor covers before installing a new gasket.
Garage cabinet combo
Garage Cabinet Combo – Tool Cabinet Set (3300 x 1925 x 472 mm) This garage cabinet combo is a versatile and spacious storage solution designed to keep your tools and equipment organized. With a sturdy construction and a well-thought-out design, this set is ideal for garages, workshops, and professional workspaces. Set Includes: 2 x Two-Door Cabinets – Each with three adjustable shelves, providing flexible storage for tools, supplies, and other essentials. 1 x 4-Drawer Trolley – A mobile storage unit with four spacious drawers, ideal for organizing smaller tools and accessories while keeping them easily accessible. 2 x Two-Door Cabinets with 1 Drawer – Offering both shelving and drawer storage, these cabinets provide convenient organization for various tools and materials. 1 x Plywood Workbench (1800 mm long) – A durable and spacious work surface, perfect for assembly, repairs, and other hands-on tasks. 3 x Wall Cabinets with Doors – Mounted overhead for space-saving storage, these cabinets help keep frequently used items within easy reach while maintaining a tidy workspace. With a total width of 3300 mm, this heavy-duty tool cabinet set provides a comprehensive storage solution, combining functionality and durability to enhance your workspace efficiency.
Garage hooks set 12pcs.
Set includes: 2 pcs. hooks 425 x 305 mm, Ø18 mm, max. load 40 kg 2 pcs. hooks 240 x 300 mm, Ø18 mm, max. load 13 kg 2 pcs. hooks 150 x 200 mm, Ø18 mm, max. load 14 kg 2 pcs. hooks 70 x 115 mm, Ø12 mm, max. load 13 kg 4 pcs. hooks 115 x 140 mm, Ø16 mm, max. load 13 kg All hooks are finished with PP end caps to reduce the risk of injury and provide a neat appearance Mounting plugs and screws are included for quick wall installation Practical wall-mounted hook set designed for organizing tools, ladders, bicycles and other equipment in garages, workshops, basements and utility rooms The set includes hooks of different sizes and load capacities, providing flexible storage for various tools and equipment Some hooks are fitted with protective foam padding to help prevent scratches and damage to stored items