Product catalog
Double lever block 0.5t
Low weight, small mounting sizes and small lever force at rated load Premium grade alloy load chain Drop-forged and expertly heat treated hooks for great strength and long wearing Capacity 0.5 t Lift height 1.5 m Diameter of load chain 4 mm Weight 2.35 kg
Double lever block 1.0t
Low weight, small mounting sizes and small lever force at rated load Premium grade alloy load chain Drop-forged and expertly heat treated hooks for great strength and long wearing Capacity 1.0 t Lift height 1.5 m Diameter of load chain 6 mm Weight 7 kg
Double lever block 1.5t
Low weight, small mounting sizes and small lever force at rated load Premium grade alloy load chain Drop-forged and expertly heat treated hooks for great strength and long wearing Capacity 1.5 t Lift height 1.5 m Diameter of load chain 7.1 mm Weight 10 kg
Double lever block 2t
Low weight, small mounting sizes and small lever force at rated load Premium grade alloy load chain Drop-forged and expertly heat treated hooks for great strength and long wearing Capacity 2.0 t Lift height 1.5 m Diameter of load chain 8 mm Weight 11.8 kg Package size 525 x 170 x 115 mm
Double lever block 3.0t
Low weight, small mounting sizes and small lever force at rated load Premium grade alloy load chain Drop-forged and expertly heat treated hooks for great strength and long wearing Capacity 3.0 t Lift height 1.5 m Diameter of load chain 10 mm Weight 17.5 kg Package size 545 x 185 x 230 mm
Double open ended spanner - 11 x 13mm TALBRO
Double open-ended spanner with two different-sized ends for tightening and loosening bolts and nuts. Suitable for use in the garage, workshop and at home.Brand: CHANGLU TOOLS (sizes 11 x 13, 13 x 14, 13 x 17 and 14 x 17 mm – TALBRO)Available sizes: 8 x 9, 8 x 10, 10 x 12, 11 x 13, 12 x 13, 13 x 14, 13 x 17, 14 x 17, 17 x 19, 19 x 22, 22 x 24, 24 x 27, 27 x 30, 30 x 32, 32 x 36, 36 x 41, 41 x 46, 46 x 50, 50 x 55, 55 x 60, 65 x 70, 75 x 80 mm
Double union - 10mm
Double union for joining two pipes or hoses of the same diameter in pneumatic lines and compressed air systems. A convenient solution for extending a line or repairing a damaged section.Brand: OMG GHIOTTOType: double unionAvailable sizes: 6, 10, 12, 14 mm
DPF cleaner concentrated IBS
Water-based professional cleaning concentrate for exhaust aftertreatment systems and selected mechanical components Designed for use in common cleaning machines and diluted with water at a concentration of 3–10% depending on the degree of contamination The low-foaming formulation contains corrosion protection for material-friendly cleaning. Type: alkaline, aqueous high-performance cleaning concentrate Application concentration: 3–10% pH value: <11 Color: blue Density: 1.05–1.07 g/cm³ Foaming behavior: non-foaming / low-foaming Oduor: characteristic CLP labelling: none required Suitable for: Diesel particulate filters (DPF); FAP filters; SCR systems; Catalytic converters Also suitable for selected mechanical components such as: Oil filters; Pistons; Injection nozzles; Tools Removes: Soot; Ash deposits; Carbon deposits and coking; Oil carbon and graphite; Grease and oil contamination Benefits: Low-foaming formulation for reliable machine use; Integrated corrosion protection for material-friendly cleaning; Demulsifying and suitable for use with oil separators; Labelling-free according to the CLP Regulation Recommended concentration for 10 L of ready-to-use cleaning solution: 3% = 0.3 L concentrate + 9.7 L water 5% = 0.5 L concentrate + 9.5 L water 10% = 1.0 L concentrate + 9.0 L water Start with the lowest suitable concentration and increase the dosage only when required by the degree of contamination Cleaning instructions: 1. Remove the filter or component according to the vehicle or equipment manufacturer’s instructions 2. Dilute the concentrate with water according to the degree of contamination 3. Fill the cleaning machine with the prepared solution and position the component according to the machine manufacturer’s instructions 4. Run the cleaning cycle using the operating time, temperature and procedure specified by the machine manufacturer 5. For heavily contaminated components, increase the concentration within the recommended 3–10% range or repeat the cleaning cycle if necessary 6. After cleaning, complete the rinsing and drying procedure specified by the machine manufacturer 7. Ensure the component is completely ready for installation before refitting
DPF foam cleaner 500ml, MANNOL
DPF foam cleaner is used to remedy reductions in performance and malfunctions caused by soiled diesel particulate filters Cleaning restores the full flow capacity of the filter Loosens and removes carbon deposits in particulate filters Removal of the DPF not necessary for cleaning Saves money, as a new particulate filter may not need to be installed (this depends on the condition of the particulate filter) Not flammable, neutral ash- and metal-free formula Evaporates without leaving residue behind Application: Remove the temperature or pressure sensor. Insert the tube through the opening which has been made and empty in the direction of the particulate filter by using puffs in ten-second intervals. Regeneration must then be initiated manually by the tester or by taking a test drive. After regeneration, query the error memory and clear any errors which may be present. One can is sufficient for a particulate filter.
Dr. 1/4" Impact screwdriver bit set 54pcs (FLAT, PZ, PH, TORX)
Professional set of impact screwdriver bits to facilitate work in hard-to-reach places. Elements made of high quality stainless steel AISI S2 Sandblasted blades Tool holder: hexagonal 1/4" Packed in a PP case The set includes: 60 mm adapter, made of CrV steel 3 magnetic sockets 48 mm: 6, 8 and 10 mm 40 bits 25 mm: Flat: 6 mm (2 pcs.), 8 mm (2 pcs.). Pozidriv: PZ1 (2 pcs.), PZ2 (4 pcs.), PZ3 (2 pcs.). Torx: T10 (2 pcs.), T15 (2 pcs.), T20 (4 pcs.), T25 (5 pcs.), T27 (2 pcs.), T30 (2 pcs.), T40 Phillips: PH1 (2 pieces), PH2 (6 pieces), PH3 (2 pieces). 10 bits 50 mm: 8 mm flat Pozidriv: PZ1, PZ2 (2 pcs.) Torx: T20, T25 (2 pieces). Phillips: PH2 (2 pcs), PH3
Dr. 3/8' Impact oxygen sensor loosening wrench 22mm
For loosening of oxygen sensors Suitable for e. g. air hammers 10 mm shank diameter (3/8") Suitable for oxygen sensors with hexagonal profile, 22 mm
Dr. Quick-release ratchet (oval head, metal handle) set 3pcs, 60 teeth 120XP
Designed with 120 positions providing a 3° swing arc so you can turn fasteners in tighter confines Designed with two double stacked 60-tooth pawls for exceptional strength Enclosed ratchet head design resists dirt infiltration for continuous and efficient execution Up to 50% thinner than conventional ratchet systems Teardrop, low-profile head and flush-mounted on/off switch allow better access in tight spaces Flush mounted reversing lever allows user to change direction with one hand without removing the wrench
Drain auger Ø9mm 10m
Effectively removes blockages in the sewage system Spiral length 10 m
Drain auger Ø9mm 5m
Effectively removes blockages in the sewage system Spiral length 5 m
Drain plug gasket assortment
Includes a wide selection of commonly used sizes for replacing worn or damaged drain plug seals during oil changes and maintenance Supplied in a practical compartmented storage case for easy organization and quick size selection Materials: aluminum, copper, nylon, fiber, NBR rubber and steel/NBR 23 different sizes: Ø12 x 24.7 x 2 mm, Ø13.6 x 24.7 x 2 mm, Ø13 x 19 x 2.3 mm, Ø16 x 26 x 2.3 mm, Ø18 x 22 x 2.3 mm, Ø19 x 27 x 2.3 mm, Ø24 x 29 x 2.3 mm, Ø14.5 x 24 x 2 mm, Ø13 x 24 x 1.5 mm, Ø12 x 22 x 1.5 mm, Ø14 x 19.5 x 1.5 mm, Ø12 x 22 x 1.5 mm, Ø18 x 28 x 2 mm, Ø13 x 22 x 2 mm, Ø14 x 20 x 1.5 mm, Ø13 x 18 x 1.2 mm, Ø16 x 22 x 1.5 mm, Ø20 x 26 x 2.5 mm, Ø14 x 20 x 1.3 mm, Ø14 x 24 x 2 mm, Ø12 x 18 x 2 mm, Ø12 x 20 x 2 mm, Ø14 x 21 x 2.5 mm
Drain valve 3/8" for compressor W-0.9/8
Drain valve – spare part for the W-0.9/8 compressor. It is used to regularly drain accumulated condensate from the air tank, helping protect the tank from corrosion and the compressed air from moisture.Connection: 3/8"Compatibility: W-0.9/8 compressorType: spare part
Drill chuck 1/2'' Ø2-13mm with adapters 4pcs
Useful Drill Chuck: This chuck can fix various bits on your drill to better satisfy your various working needs, efficient and effortless. Reliable Operation: Keyless and self tightening design ensures great stability under high work speed, and the firm fixing will not loosen. Broad for Matching: The drill chuck has a wide clamping range is 2‑13mm, very suitable for a variety of bits, very practical and reliable. Quick Installation: Quick in change, the keyless drill chuck with a light weight and a compact size allows for convenient installation. Chuck Diameter: Approx. 43mm Connection Size: 1/2''-20UNF Clamping Range: Approx. 2 ~ 13mm
Drill chuck 1/2" 1-10mm
Drill chuck for clamping drill bits and other round-shank accessories in a drill or drill driver. It can be used as a replacement for a worn or damaged chuck.Mounting: 1/2"Clamping range: 1–10 mmApplication: drilling tools
Drill chuck 1/2" 2-13mm
Drill chuck with a 1/2" mount and a 2–13 mm clamping range. Designed for holding drill bits and other straight-shank tools in a drill or driver, and for replacing a worn chuck.Mount: 1/2"Clamping range: 2–13 mmApplication: drills and drivers
Drill chuck 3/8" 1-10mm
Drill chuck with a 3/8" mounting for clamping drill bits and other round-shank accessories in a drill or drill driver. It is also suitable as a replacement for a worn or damaged chuck.Mounting: 3/8"Clamping range: 1–10 mmApplication: drilling tools
Drill chuck key 1.5 - 10.0mm
Key for drill chuck. Tool holder size: 1.5-10 mm Length: 85 mm Material: carbon steel, blackened surface