Product catalog
Deburring tool with 5 blades
The deburrer is designed for machining copper, steel, aluminum, brass, cast iron and plastic pipes Deburring tool with replaceable blade made of HSS M2 steel Rotary blade with a standard mounting bracket
Decollation nut separator 5pcs
#0: 2 - 3 mm #1: 3 - 5 mm #2: 4 - 8 mm #3: 5 - 10 mm #4: 6 - 12 mm
Decollation nut separator 8pcs
These extractors will remove most kinds of damaged, stripped, rusted, broken, or stuck screws from any wood or metal surface with relative ease Reverse thread bits easily remove screws, bolts, studs, and threaded pipe fittings 1# - M3 – M6, L = 52 mm 2# - M6 – M8, L = 57 mm 3# - M8 – M11, L = 66 mm 4# - M11 – M14 L = 75 mm 5# - M14 – M18, L = 82 mm 6# - M18 – M25, L = 91 mm 7# - M25 – M35, L = 96 mm 8# - M35 – M50, L = 103 mm
Deep hole marker set (4 colors)
Automatic technical pencil for deep holes. The body of the pencil is made of plastic. The working part of the pencil is metal. The metal tip is 40 mm long and has a reduced diameter. The pencil can be attached to a belt. Metal tip length: 40 mm Diameter of metal tip: 6 mm Styluses included: 3 pcs white, 3 pcs yellow, 3 pcs red
Deep offset double box end wrench - 27 x 30mm
Double box end wrench design with 2 sizes per wrench 40° offset double box end design provides better access to recessed fasteners Off-corner loading design on box ends provide better grip and reduces fastener rounding Sleek head design enables access to tight spots where a ratchet will not fit High-visibility stamped markings provide quick size identification Bright, full polish chrome finish easily wipes clean and resists corrosion Chrome vanadium alloy steel (Cr-V) for exceptional strength and durability Meets or exceeds ASME B107.100
Deep offset double box end wrench (S.A.E.) - 15/16"x1"
Double box end wrench design with 2 sizes per wrench 40° offset double box end design provides better access to recessed fasteners Off-corner loading design on box ends provide better grip and reduces fastener rounding Sleek head design enables access to tight spots where a ratchet will not fit High-visibility stamped markings provide quick size identification Bright, full polish chrome finish easily wipes clean and resists corrosion Chrome vanadium alloy steel (Cr-V) for exceptional strength and durability Meets or exceeds ASME B107.100
Deep offset double box end wrench set 6pcs (8-21mm)
40 CRV surface treatment mirror finish 8 x 10 mm, L= 237 mm 11 x 13 mm, L= 332 mm 12 x 14 mm, L= 332 mm 15 x 17 mm, L= 411 mm 16 x 18 mm, L= 414 mm 19 x 21 mm, L= 422 mm
Deep ofset double box end wrench set 11pcs. (6-32)
6x7, 8x9, 10x11, 12x13, 14x15, 16x17, 18x19, 20x22, 21x23, 24x27, 30x32 mm 70° offset on box end to reach recessed fasteners Surface mirror polished
Deep well water pump 550W 230V/50Hz. Stainless steel
Designed for pumping clean water from deep wells. The robust housing is made of durable and corrosion-resistant stainless steel (inox). Copper winding Rotor pump Maximum immersion depth: 80 m Maximum water temperature: 35 °C. Maximum dirt diameter: 1.5 mm. Cable length: 20 m. Water connection: 5/4 inch. Protection class: IP58. Power 550 W Voltage 230 V, 50/60 Hz Maximum capacity 6000 l/h Maximum lifting height 50 m Maximum immersion depth 80 m Weight: 12.4 kg Stainless steel housing IP58 Dimensions 78 x 78 x 1154 mm
Deliver hose 1" (rubber), L=6m
Material Rubber (EN1360) Hose inner Ø 25.4 mm (1") Working pressure 14 bar L= 6 m Without fittings
Deliver hose 3/4" (rubber), L=4m
Material Rubber (EN1360) Hose inner Ø 19 mm (3/4") L= 4 m Working pressure 14 bar Without fittings
Dent puller / vacuum suction lifter 1x123mm (aluminium)
Carrying capacity 30 kg Material Aluminum alloy Glass holder with plastic lid
Dent puller / vacuum suction lifter 2x123mm (aluminium)
Carrying capacity 80 kg Material Aluminum alloy Glass holders with plastic lids
Dent removal kit
Offers the ability to easily and effectively remove dents The dent repair effect is immediate The product does not leave any traces The device is made of high-quality materials, with attention to detail and precision of workmanship, ensuring long and effective work of the tool The use will not damage the paintwork thanks to the soft but durable rubber stands and adapters The kit includes a spatula to remove hot glue residues, designed so as not to damage the paintwork 1 pcs gold PDR puller for dent removal 33 pcs adapters, mushrooms 6 pcs PDR hot melt glue sticks (3 pcs yellow 11 x 170 mm, 3 pcs black – 11 x 200 mm) 1 pcs 100 ml glue bottle with a convenient atomizer 1 pcs spatula to remove the glue
Dent removal kit
Provides the ability to easily and effectively remove dents The tool is made of high quality materials with attention to detail and precision of work, ensuring long and efficient operation of the tool The use of soft but durable rubber stands and adapters will not damage the paint The kit includes a putty to remove hot glue residue Bridge with brackets Hot glue gun 6 different sizes of interchangeable adapters A spatula Degreasing bottle 5 sticks of hot glue
Diagonal cutting nippers 160mm
Article No: 72 21 160 EAN: 4003773046820 Cutting face flush For nearly flush cutting of moulded plastic components from sprues Cuts soft materials such as lead in a flush cut With opening spring Dimensions 160 x 76 x 14 mm Weight 165 g Diagonal cutters for plastic and other soft materials Why special diagonal cutters are needed for plastic Diagonal cutters for wire have bevels on the cutting edges, producing a wedge-shaped cut towards the centre of the cut product. The wire ends then have wedge-shaped cut surfaces. A flush, smooth cut is desired when separating moulded parts and sprues, however, which creates the least finishing work when deburring. The cutting edges of the Knipex 72 21 160 diagonal cutters have no bevel towards the component, but are surface ground. For this reason, the sprue is cut off directly on the moulded part. The cutting edge runs parallel to the component. Cutting edges at a 90° angle for deburring in poorly accessible areas Due to their cutting faces at an angle of 90°, the Knipex 72 21 160 diagonal cutters are suitable for work perpendicular to the component. This approach is necessary when access from the side is not possible, as with angled plastic mould parts or machine components. Plastic parts are separated cleanly and flush from sprue after demoulding by the surface ground cutting faces. Plastic injection moulds are separated; sprue residues are removed even from areas that are hard to reach. With opening spring to relieve strain on the user – compact and stable In many cases, work steps in plastic injection moulding and production processes repeat. Users who frequently separate sprues from moulded parts therefore appreciate the opening spring on the 72 21 160, which saves one hand movement during each cutting operation The Knipex diagonal cutters for plastic have been designed for many years of work in plastic injection moulding and other industrial areas. We forge them from vanadium electric steel. Warming them and then quenching them in oil gives them their high strength.
Diagonal cutting pliers - L=175mm
HRC 56-62 Cutting wire: Copper Ø2.6 mm; Iron Ø2.4 mm; Steel Ø2.0 mm Cr-Ni Steel
Diagonal cutting pliers 125mm KNIPEX
Article No.: 70 01 125 EAN: 4003773013402 Narrow head style for use in confined areas The indispensable diagonal cutter for all-round use High-quality material and precise workmanship for long service life Precision cutting edges for soft and hard wire Clean cutting of thin copper wires, also at the cutting edge tips Cutting edges additionally induction-hardened, cutting edge hardness approx. 62 HRC Cutting capacities medium hard wire (diameter) Cutting capacities medium hard wire Ø 2.3 mm Cutting values for hard wire Ø 1.5 mm Pliers black atramentized Head polished Handles plastic coated Standard DIN ISO 5749 Dimensions 125 x 50 x 13 mm Weight 80 g
Diagonal cutting pliers 140mm
Article No.: 70 01 140 EAN: 4003773013419 Optimised power transmission for 20 % higher cutting performance than the previous model The indispensable diagonal cutter for all-round use High-quality material and precise workmanship for long service life Precision cutting edges for soft and hard wire Clean cutting of thin copper wires, also at the cutting edge tips Cutting edges additionally induction-hardened, cutting edge hardness approx. 62 HRC Narrow head style for use in confined areas Cutting capacities soft wire (diameter) Cutting capacities soft wire Ø 4.0 mm Cutting capacities medium hard wire (diameter) Cutting capacities medium hard wire Ø 2.5 mm Cutting values for hard wire Ø 1.8 mm Pliers black atramentized Head polished Handles plastic coated Standard DIN ISO 5749 Dimensions 140 x 50 x 13 mm Weight 126 g
Diagonal cutting pliers 150mm
6", L = 150 mm Ergonomically designed two-colour durable non-slip handle High quality alloy steel
Diagonal cutting pliers 175mm
With sharp and durable ultra-finished blades Optimized blade angle for a precise cutting result Spring assist action minimizes hand fatigue Optimized hand & finger contact points in handle to maximize fit, control, and user ergonomics Used for cutting 4-conductor copper cable and soft wire up to 0.5mm in diameter, and more
Diagonal cutting pliers for plastics 140mm KNIPEX
Article No:. 72 01 140 EAN: 4003773043713 L= 140 mm Cutting face flush For nearly flush cutting of moulded plastic components from sprues With opening spring Compact diagonal cutters for plastic and soft materials such as lead For the smooth, flush cutting of sprue as arises during injection moulding Surface ground cutting edges (no bevel) Handles coated with non-slip plastic Vanadium electric steel, forged, oil hardened Head with precision finish Dimensions 140 x 47 x 13 mm Weight 120 g