Product catalog
Cut-off wheel 355x3.2x25.4 41. Stainless steel
Type - 41, flat Wheel Ø 355 mm Wheel thickness 3.2 mm Hole Ø 25.4 mm Grade/Grain size - Medium hard / 30 Bond type - Resin. Reinforced Abrasive material - Brown Al oxide Max 4400 RPM Safety requirements EN12413
Cut-off wheel 400x25.4x3.5mm for J3G-400T
Cut-off wheel 400x25.4x3.5mm for J3G-400T
Cut-off wheel 76mm
Wheel Ø 76 x 1.59 x 9.5 mm (3 x 1/16 x 3/8") Material brown fused aluminum oxide For air cut off tool AT6027TB
Cut-off wheel. Higher quality stainless steel 125x1.0x22.2 41
Type - 41, flat Wheel Ø 125 mm Wheel thickness 1.0 mm Hole Ø 22.2 mm Grade/Grain size - Hard/ 60 Bond type - Resin. Reinforced Abrasive material - Brown Al oxide Max 13300 RPM Safety requirements EN12413
Cut-off wheel. Stainless steel 230x2.0x22.2 41
Type - 41, flat Wheel Ø 230 mm Wheel thickness 2.0 mm Hole Ø 22.2 mm Grade/Grain size - Hard/ 60 Bond type - Resin. Reinforced Abrasive material - Brown Al oxide Max 6600 RPM Safety requirements EN12413
Cutter for plastic pipes and sealing sleves 20-50mm KNIPEX BiX
Article No:. 90 22 10 BK EAN: 4003773087311 Clever pipe cutter: Cuts pipes without shavings and fits comfortably in the hand Can cut high-temperature plastic drain pipes and electrical conduits in next to no time Can be used to cut sealing sleeves during final assembly – close to the wall, standard-compliant Cuts unreinforced plastic pipes from Ø 20 to 50 mm with a wall thickness of up to 2.4 mm Cuts soft plastic pipes and those with foam cores from Ø 20 to 50 mm with a wall thicknesses of up to 3.5 mm Cuts sealing sleeves approx. 2-3 mm from the wall Cuts pipes quickly, cleanly and without shavings Rotatable knife block for cutting plastic pipes (blade in the middle) and sealing sleeves (blade outside) With locking mechanism for safe transport Two spare blades integrated in the tool Dimensions 72 x 85 x 44 mm Weight 108 g
Cutter for plastic pipes KNIPEX
Article No:. 90 20 185 EAN: 4003773067122 Body of the tool made from shock-resistant, glass reinforced plastic Trapezoidal blade penetrates the centre of the material and cuts two cut edges Blades are made of special tool steel, oil-hardened Handles glass fibre reinforced plastic handles Opening spring and locking lever Pipe cutter for cutting thin walled plastic pipes (armoured pipes) and hoses made of soft plastics and rubber (also fabric reinforced) up to an outer diameter of 25 mm Not suitable for cutting cables Cutting edge length Ø 25 mm Dimensions 185 x 70 x 25 mm Weight 172 g
Cutter wheels for tubing cutter 2pcs
For cutting copper, aluminum, brass and thin wall tubing Tempered steel offers strength and durability for long-lasting performance Black oxide finish to resist corrosion Blade for ST97303ST
Cutter wheels for tubing cutter 2pcs 3x18mm
For cutting copper, aluminum, brass and thin wall tubing Tempered steel offers strength and durability for long-lasting performance Black oxide finish to resist corrosion Blade for ST97301ST ST97302ST ST97305ST
Cutting nozzle No.1 (8-15mm) for cutting torch 150 P
Cutting nozzle No. 1 (8–15 mm) for the DONMET 150 P cutting torch. Used for oxy-fuel cutting of metal and for replacing a worn or damaged nozzle so the torch delivers a good cut again.Brand: DONMETNozzle number: No. 1 (8–15 mm)Compatible torch: 150 P
Cutting nozzle No.3 (30-50mm) for cutting torch 341 P
Cutting nozzle No. 3 for the DONMET 341 P gas cutting torch. The nozzle is intended for cutting metal 30–50 mm thick; the nozzle number is chosen according to the thickness of the material being cut.Brand: DONMETNozzle number: No. 3Cutting thickness: 30–50 mmCompatibility: 341 P cutting torch
Cutting nozzle No.4 (50-100mm) for cutting torch 150 P
Cutting nozzle No. 4 for the 150 P gas cutting torch. The nozzle size is chosen according to the thickness of the metal being cut; a worn or damaged nozzle should be replaced to keep the cut clean and stable.Brand: DONMETCompatibility: cutting torch 150 PNozzle number: 4Cutting range: 50–100 mm
Cutting nozzle No.6 (200-300mm) for cutting torch 341 P
Cutting nozzle No. 6 is a replaceable part for the DONMET 341 P cutting torch. It is intended for gas cutting of thick metal; replacing a worn nozzle helps maintain a stable flame and a clean cut.Brand: DONMETNozzle No.: 6Cutting thickness: 200–300 mmCompatibility: 341 P cutting torch
Cutting pliers (pointed) - L=150mm
For cutting plastic / vinyl coated cable The plier body is forged from high-quality Cr-V steel The jaws of the pliers are equipped with springs, making them easy and quick to use The pliers are pointed, making them easy to operate in narrow spaces
Cutting torch 100
1 tip No. 1 Cutting depth up to 2 - 100 mm Consumption: oxygen 2.2 – 2.7 m³/h / acetylene 0.35 – 0.40 m³/h M16 x 1.5 / M16 x 1.5LH Hoses ø 9 mm and ø 9 mm Comply with JB/T 6970 standard manufacturing requirements The main body is made of copper, the whole is polished, and the pure copper knob is used for precise coordination and tightening Stainless steel conduit is not oxidized and can keep the surface clean Good windproof performance and stable outdoor working performance Dimensions 530 x 115 x 55 mm Weight 1.05 kg
Cutting torch 30
1 tip No. 1 Cutting depth up to 2 - 30 mm Consumption: oxygen 0.8 m³/h / acetylene 0.21 m³/h M16 x 1.5 / M16 x 1.5LH Hoses ø 9 mm and ø 9 mm Comply with JB/T 6970 standard manufacturing requirements The main body is made of copper, the whole is polished, and the pure copper knob is used for precise coordination and tightening Stainless steel conduit is not oxidized and can keep the surface clean Good windproof performance and stable outdoor working performance Dimensions 444 x 109 x 59 mm Weight 0.5 kg
Cutting torch 300
1 tip No. 2 Cutting depth up to 7 - 300 mm Consumption: oxygen 9 – 10.8 m³/h / acetylene 0.68 – 0.78 m³/h Working pressure: oxygen 0.65 MPa / acetylene 0.001 – 0.1 MPa M16 x 1.5 / M16 x 1.5LH Hoses ø 9 mm and ø 9 mm Comply with JB/T 6970 standard manufacturing requirements The main body is made of copper, the whole is polished, and the pure copper knob is used for precise coordination and tightening Stainless steel conduit is not oxidized and can keep the surface clean Good windproof performance and stable outdoor working performance Dimensions 650 x 140 x 55 mm Weight 0.88 kg
Cutting torch 341 P
Cutting depth up to 300 mm Used gas: propane-butane, methane L = 1100 mm M16 x 1.5 / M16 x 1.5 LH Hoses ø6 mm and ø9 mm Standard GOST 2 tips No. 1, 4
Cutting torch 374 P
Cutting depth 3 - 300 mm Used gas: acetylene, propane-butane, methane 1 tip No. 3 L = 540 mm M16 x 1.5 / M16 x 1.5LH Hoses ø 6 mm and ø 9 mm Standard GOST
CV Boot clamp pliers
Steel jaws with PVC coated handles for added comfort Each handle features a 1/2" drive for use with a torque wrench and breaker bar where vehicle maker demands specific band tensions Suitable for all ear-type CV boot clamps / clips
CV boot clamp pliers
Application range: Axle boots for Audi, Bmw, Chrysler, Ford, GM, Honda, Mazda, Mercedes Benz, Nissan, Opel, Porsche, VW and others Suitable working with earless clamps, thermoplastic axle boots, for example Oetiker 168, up to 100 mm Length 260 mm
CV boot with clamps and grease
CV joint boot supplied with clamps and grease. Designed to replace a damaged or torn boot, protecting the joint from dirt and moisture and keeping the grease inside. The included clamps and grease allow the replacement to be done without buying extra materials.Brand: ÖLBOX GmbHContents: boot, clamps, grease