Product catalog
Breather for oil compressor 4V-1.05/12.5 11mm. Spare part.
Breather supplied as a spare part for the MZB 4V-1.05/12.5 oil-lubricated compressor. It lets the compressor crankcase breathe by equalising pressure. Used to replace a worn or damaged breather.Brand: MZBCompatible model: 4V-1.05/12.5Size: 11 mmType: spare part
Buffing wheel 65mm for AT-7036CN
Buffing wheel with a 65 mm diameter for the HYMAIR AT-7036CN air tool. Used for polishing and finishing surfaces and for replacing a worn wheel so the tool can continue to be used.Brand: HYMAIRCompatible model: AT-7036CNDiameter: 65 mm
Bush bearing press tool kit 51pcs
Professional tool for commercial or occasional use. Master custom bush, bearing and seal driver. Manufactured from chrome vanadium steel and treated for strength and durability. All 50 pieces are interchangeable with each other so you get 2450 different size variations. Black powder coated finish to prevent rust and corrosion. Simply select the required sizes and assemble your driver tool. Specification: Material:chrome vanadium steel Suitable for :cars ,motorbikes or anything that has bearings or seals. Handle size: approx. 220 x 20 x 20 mm Box size: approx. 330 x 255 x 100 mm Package size: approx. 350 x 275 x 115 mm Package Include: 49pcs - discs 18-65mm & 74mm 1pc - disc connector 1pc - handle 1pc - hex key
Bushing bearing seal driver set 33pcs
The 33-piece set is designed for fitting bearings and seals. It consists of inch and metric adapters. Material: aluminum Contains: 3 pins with diameters: 0.4", 0.6", 0.8" Inch adapters in sizes: 3/8" x 7/16" 7/16" x 1/2" 1/2" x 9/16" 9/16" x 5/8" 39/64" x 11/16" 5/8" x 3/4" 11/16" x 13/16" 47/64" x 7/8" 13/16" x 15/16" 55/64" x 1" 15/16" x 1-1/16" 1" x 1-1/8" 1-1/8" x 1-1/4" 1-1/4" x 1-3/8" 1-1/16" x 1-3/16" 1-3/16" x 1-5/16" Metric adapters with diameters: 10 x 12 mm 12 x 14 mm 14 x 16 mm 15 x 17 mm 16 x 18 mm 18 x 20 mm 20 x 22 mm 22 x 24 mm 25 x 27 mm 28 x 30 mm 30 x 34 mm 32 x 36 mm 35 x 40 mm 38 x 42 mm
Butan gas Specialist+ "Stop Gas" 190g
Butane gas 190 g Suitable for work at low temperatures up to -5° C. The unique design of the cylinder ensures that gas does not escape after the cylinder is punctured STOP ADR system for safety Max operating temperature 1200° C The gas cylinder complies with the EN417 2012 requirement for gas cylinders
Butan gas Specialist+ 227g
Butane gas cartridge with valve Maximum operating temperature: 1,200° C Use in compact butane stoves and with burners Gas cartridge conforms to EN417 2012 requirements for gas cartridges Made in EU
Butane gas for filling lighters Specialist+ 227 g
Specialist+ butane gas fill for lighters and gas soldering irons Gas cartridge conforms to EN417 2012 requirements for gas cartridges Made in EU
C-clamp - 2" 50mm
C-shaped structure, made of high-performance forged steel, surface sprayed Trapezoidal thread, pressure plate and T-bar handle Used in metal and steel construction industry, solid structure with high clamping force
C-Clamp locking pliers
11", L = 280 mm Made of high-alloy steel, strong toughness, chrome-plated anti-rust treatment Adjustable or jaws can be used for various bulky, uneven, tapered workpieces Clamping, e.g. taller edge profiles Spacing and clamping force adjustment via knurled screws with quick release lever
C-Clamp locking pliers 280mm KNIPEX
Article No:. 42 44 280 EAN: 4003773080350 With moveable jaws Gripping jaws of chrome vanadium steel, drop forged Clamps and balances bulky work components and profiles with high ridges of up to 40 mm For gripping, clamping and holding of diverse profiles Heavy duty model With adjustment screw and release lever One-hand operation High clamping pressure due to toggle lever action Clamping width square 90 mm Dimensions 280 x 145 x 32 mm Weight 740 g
Cable connector set (brass)(65pcs)
Material brass, PVC SC6-6 - 15 pcs SC6-8 - 10 pcs SC10-6 - 10 pcs SC10-8 - 10 pcs SC16-6 - 5 pcs SC16-8 - 5 pcs SC25-6 - 5 pcs SC25-8 - 5 pcs
Cable cutter - L=580mm
Cable cutting scissors for cutting thick copper and aluminum wires. Cutting jaws are made of high-carbon 65Mn steel YT-18610 can cut wires up to 125 mm2 cross-section and 12.5 mm diameter YT-18611 can cut wires up to 250 mm2 cross-section and 18 mm diameter YT-18612 can cut wires up to 500 mm2 cross-section and 25 mm diameter Profile safety handles under the hand
Cable cutter 160mm
Cold-forged wire cutters with two-component tips on the handle Cutting jaws made of hardened to the level of HRC 55-60 forged CrV50 steel hardened body to the level of HRC 42-48 cable cutting: up to 6 mm Size 160 mm
Cable cutter knife 8-28mm
The cable cutter, made of high-quality materials, allows you to strip insulation both across and along the wire The handle is made of two-component plastic Nice-to-touch black anti-slip part and red, hard and durable mounting part Functions: wire cutting, insulation stripper Cutting diameter 8 - 28 mm Surface finish: blackened, oxidized
Cable guide fiberglass 30m
Applied for pulling wires and cables into cable ducts and pipes and their sheaths. Used in electrical, telecommunications and IT industries. Simple operation and ease of use Flexible line 30 m long and 4 mm diameter made of fiberglass coated with durable plastic Profiled eyelet tip, with copper threaded connection, effectively holds the pulled cable Housing, control and handle made of ABS plastic resistant to mechanical damage Working part length: 30 m Working part diameter: 4 mm Working part material: fiberglass, PVC
Cable guide spring steel 3x1.5mm x 15m
Applied for pulling wires and cables into cable ducts and pipes and their covers. Used in the electrical, telecommunications and IT industries. Simple operation and ease of use Strap size 3 x 1.5 mm made of durable, flexible spring steel Pulling device - made of ABS plastic resistant to mechanical damage Profiled eyelet tip effectively holds the pulled cable Brake allows you to lock the tape after pulling it to the desired length Working part length: 15.3 m Working part size: 3x1.5 mm Working part material: Spring steel Casing material: ABS
Cable knife with hook blade 165mm, KNIPEX
Article No:. 16 20 165 SB EAN: 4003773034971 With knife and hook blade, protective cap included For stripping all common round cables Self-tightening holding lever With adjusting screw for cutting depth adjustment Turnable blade for circular and longitudinal cutting Spare blade inside the handle Secure grip due to soft component material on handle and holding lever to avoid slipping Housing: plastic, impact-proof Handles shock-resistant plastic body Stripping capacities (diameter) Ø 8.0 — 28.0 mm Dimensions 165 x 84 x 31 mm Weight 85 g
Cable lug crimping tool 6-50mm²
Mechanical press for crimping non-insulated cable terminals on wires with cross-sections of 6, 10, 16, 25, 35 and 50 mm². The design based on the gear increases the crimping force. The rotating head is made of durable 40Cr steel. Rubber anti-slip pads on the handle facilitate a firm grip during work. length: 390mm Body Material: #45 Carbon Steel head material: 40Cr
Cable pipe wrench - Size 24" (609.6mm)
Adjustable movable clamp head made of 55 # steel section The pipe body is made of high quality steel pipe Quick one-handed operation helps users to complete jobs faster Spring-loaded jaw design provides rapid ratcheting action Non-slip comfortable rubber handle
Cable reel 25m 3Gx1.0mm 230V
L=25m Sockets 4 (230V) Cable 3G1.0mm² Protection grade IP20, wire insulation H05VV-F With grounding Weight 3.2kg CE conformity
Cable reel 25m 5G2.5mm² 230/400V
L=25m Sockets 1 (380V) + 2 (230V) Cable 5G2.5mm² Protection grade IP44 With grounding Weight 10.75kg CE conformity
Cable reel 30m 3G2.5mm² 230V
L=30m Sockets 4 (230V) Cable 3G2.5mm² Protection grade IP44 Weight 7.8kg CE conformity