Product catalog
Battery terminal cleaner
Battery terminal cleaner for removing oxide and dirt from battery posts and cable clamps. Clean contacts ensure a better electrical connection and help avoid engine starting problems.Application: battery posts and clampsType: wire brush
Battery terminal crimping tool
It is essential tool for replacing or repairing battery cable terminal ends Special design provides a better way to prevent over crimping and a neat clean appearance Applications: terminal sizes 6-ga. through 4/0
Battery tester
Test results show state of voltage, state of health,charging, actual CCA value, conductance value, internal resistance Time mode of test about 3 seconds For testing 12V batteries For testing 12V and 24V charging systems Battery cranking test, load test Battery charging test, ripple test Test results storage and review Truck only could test the 24V system, not the 24V battery Print test results and battery report on PC CCA range 40 - 1000 A (3-220Ah) Working temperature -20 °C +50 °C Multilanguage interface: English, French, German, Spanish, Italian, Polish USB interface
Battery tester
Battery voltage 12 V Supported batteries lead-acid AGM / GEL / SPIRAL / SLI and 12 V lithium batteries CCA test range 30 - 3000 A Voltage measurement range 7 - 30 V DC Starting system test 12 / 24 V Charging system test 12 / 24 V High-voltage protection QC fast test Test result storage by QR code Test data review up to 99 records Display 2.8" TFT color LCD with backlight Housing material ABS plastic Operating temperature -18 °C to +50 °C Important: 24 V refers to starting and charging system testing. The BAT-360 battery test itself is intended for 12 V batteries
Battery tester 1.5V and 9V
Tester for all types of batteries with a nominal voltage of 1.5V and 9V. 1.5V: AA, AAA, R03, SH16, MN2400, HP7, MN1500, UM3, C, HP11, MN1400, SO11, LR14, UM2 D, HP2, MN1399, SP2, R20, UM1; 9V: PP3, MN1604, 6F22, 006P It allows you to easily check whether the battery is suitable for use. The tester does not require power supply. The measurement is made by touching the battery poles with the metal tips of the tester. The measurement is performed under load, which makes it more reliable than measurement with a traditional multimeter. Thanks to its small size, it will fit in any cabinet or toolbox. green field with the word GOOD - the battery is suitable for use yellow field with the word LOW - the battery will run out soon red field with the words REPLACE, RECHARGE - the battery is at the end of its capacity and needs to be replaced with a new one
Bead booster 20l
Capacity 20 l Max pressure 10 bar Recommended operating pressure 6 - 8 bar Outlet air quick coupler Weight 11 kg Package dimensions 435 x 410 300 mm
Bead booster 40l
Capacity 40 l Max pressure 10 bar Recommended operating pressure 6 - 8 bar Outlet air quick coupler Package size 575 x 430 x 340 mm
Bead booster 7.5l
Capacity 7.5 l (2 gal) Max pressure 10 bar (145 psi) Recommended operating pressure 6 - 8 bar (87 – 116 psi) Outlet air quick coupler Works on tyre up to 24“ Weight 7 kg Package dimensions 570 x 200 x 190 mm
Bead breaker buffer for PL-1221/1227/1256. Spare part.
Bead breaker buffer for PULI PL-1221, PL-1227 and PL-1256 tyre changers. This spare part replaces a worn or damaged buffer to restore correct operation of the machine. Please check that your machine model matches before ordering.Brand: PULICompatibility: PL-1221 / PL-1227 / PL-1256Type: spare part
Bead breaker buffer with pot point for PL-1201/1211. Spare part.
Bead breaker buffer with pot point – a spare part for PULI PL-1201 and PL-1211 tyre changers. Intended to replace a worn or damaged buffer and restore proper bead breaker operation.Brand: PULICompatible with: PL-1201, PL-1211Part type: spare part
Bead breaker shovel protection cover for PL-1201/1211/1221/1227/1256. Spare part
Suitable for PL1201, PL1211, PL1221, PL1227 and PL1256
Bead pressing device
Bead pressing device used during tyre fitting to hold the tyre bead in the rim well and make mounting easier. Especially useful when working with stiff, low-profile tyres on a tyre changer.Application: tyre fittingType: bead pressing device
Bearing puller 2 jaw. European style - 60mm
This 2-jaw bearing puller (European style) is designed for pulling bearings, gears, pulleys and bushings off shafts. The jaws grip the part behind its edge, while the central screw presses against the shaft end and gradually draws the part off.Number of jaws: 2Design: European styleAvailable sizes: 20mm, 38mm, 60mm, 80mm, 90mm
Bearing roller tire repair tube patch tyre tool
Bearing roller Ø37mm Bearing roller thickness 4mm
Bearing roller tire repair tube patch tyre tool 36x40mm
Bearing roller for pressing down tire and tube repair patches after they have been applied. It helps the patch sit evenly on the surface and pushes air out of the bonded area for a reliable repair.Size: 36 x 40 mmApplication: tire and tube repair
Bearing separator 140mm (105-150mm)
Jaw capacity 140mm Spread 105-150mm Jaws - forged steel
Bearing separator 170mm (150-200mm)
Jaw capacity 170 mm Spread 150-200 mm Jaws - forged steel
Belt and disc sander 375W 2in1, 230V
Voltage 220 - 240 V Frequency 50/60 Hz Power 375 W Idle speed 1420 rpm - 50 Hz Second speed 1700 rpm - 60 Hz Wheel size Ø 150 mm (Grain 80) Belt dimensions 915 x 100 mm (Grain 80) Table dimensions 190 x 125 mm Package dimensions 490 x 300 x 265 mm Weight 14 kg
Belt type oil filter wrench (Ø65-105mm)
Adjustable range: 65 – 105 mm Soft grip handle with twist adjuster
Belt-driven air compressor 100L (vertical receiver) 310L/min 8bar
Belt-driven air compressor Tank capacity 100 L Cylinder Ø 65 mm, 2 cylinders Flow rate 310 l/min (10.95 CFM) Max working pressure 8 bar Max pressure reach time 2,45 min Motor power 2.2 KW / 220 V Speed 1050 r/min Noise level 83 dB Weight 76 kg Overall dimensions 620 x 450 x 1320 mm CE conformity Package dimensions 670 x 480 x 1400 mm - 94 kg
Belt-driven air compressor 180L 1051L/min 8bar
Belt-driven air compressor Tank capacity 180 L Cylinder Ø 90 mm, 3 cylinders Flow rate 1051 l/min (37.1 CFM) Max working pressure 8 bar Max pressure reach time 1,48 min Motor power 7.5 KW / 380 V Speed 920 r/min Noise level 85 dB Weight 168 kg Overall dimensions 1450 x 480 x 1000 mm CE conformity Package dimensions 1550 x 550 x 1000 mm - 188 kg