Product catalog
Special socket for TESLA battery cover
Battery cover screw tool compatible with Tesla screw removal sleeve special battery box 5 angle tooth special wrench Easily remove the screws on the battery compartment cover Compatible with Tesla Model 3 model Y and other cars Material: CR-MO
Spiral bender with 3 patterns
Max cold steel capacity: Square / Round steel 10 mm Flat steel 30 x 10 mm Moulds 80, 125, 200 mm Weight 27 kg Package size 470 x 270 x 180 mm
SPLINE bit 1/2" M17 x100mmL, S2
Material S2|CrV 6150 DIN 3120 Designed for cylinder head screws in Daimler Benz engines M400 - M420 - M500, use like MB-No. 422589010900 or the rear axle on Volkswagen Passat and others
Splint pin set 555pcs
150 pcs. R-01 1.6 x 25 mm 150 pcs. R-02 2.4 x 25 mm 100 pcs. R-03 2.4 x 38 mm 75 pcs. R-04 3.2 x 32 mm 50 pcs. R-05 3.2 x 50 mm 30 pcs. R-06 4.0 x 64 mm
Spoke wrench set 11pcs
Suitable for adjusting spoke tension and correcting buckled wheels Used on most OEM or aftermarket wheel spokes compatible with Honda, Kawasaki, Suzuki, Yamaha, KTM, Husky and others motorcycles Tips are made from hardened steel with a chrome finish for strength Sizes 5.0, 5.2, 5.4, 5.6, 5.8, 6.0, 6.2, 6.4, 6.6, 6.8, 7.0 mm
Spot welding machine and dent bar set
Specifications Suppport voltage: 220V / ~50 hz Input power: 3 KW Input current: 32 A (MAX.) Working mode: 7 Modes Normal working hours: Automatic mode program setting Vacuum suction: 180 KGS / 396.8 LBS Welding thickness of single side: 0.6~1.2mm The item has 7 modes for your choice. With the simple operation panel. it won't be a trouble to use the machine. The switch among those modes can be very steady and smooth. The Spot Dent Puller Dent Puller only produces small solder spots, which mean it won't damage the anticorrosive paint on the other side of the panel. The cooling system can quickly achieve heat dissipation, and make the machine not so easy to burn. Providing high efficiency during your work and fast heat dissipation is ensured. Suitable for Sheet metal fire, meson, straight pull, spot welding, flattening, wave line, stud, OT film, triangular and so on. Package Includes 1pcs x Car Body Stud Welder Dent Repair Main Unit 1pcs x Spanner 1pcs x Hook Hammer 1pcs x Manual Sucker 1pcs x Triangle Chuck 1pcs x Wave Line Kit 2pcs x Carbon Rods 1pcs x Manual (English) 1pcs x Carbon Rod Connector 2pcs x Packs of Gasket Kit (Long and Round) 10pcs x Triangle Straight Pull Gaskets Notice: This spot welding machine has an automatic overheating protection function. When the machine is overused, the machine may stop working for a few minutes. During this time, the indicator light in the middle of the screen will stay on. Before welding, please protect your eyes and wear protective clothing. Do not wear metal jewelry on your hands. Please make sure that the product is connected to the ground wire and the grounding power cord is intact. Due to the heavy weight of the product, unnecessary squeezing is unavoidable during transportation. If you cannot turn it on, please check the switch or fuse in time.
Spot welding machine for aluminum and dent bar set
Specifications Suppport voltage: 220V / ~50 hz Input power: 3 KW Input current: 60-90 A (AC1V-7V) Working mode: 2 modes (smart automatic and manual) Autonomous mode setting Max pulling force: 2 tons Single side welding thickness: 0.6-1.2 mm Small-scale Spot Welding: This spot welder makes a small welding spot that means it won't damage the anti-corrosive paint on the other side of the panel. Fast Heat Radiation: The side holes can help the dent puller quickly dissipate heat.The heating of the machine has the function of overheating protection. When the temperature reaches a critical value, the welding machine will automatically stop working, and can continue to operate after cooling. the automatic overheating protection function can ensure the spot welder dent puller work continuously for a long time without worrying about burnout. It features high efficiency, practicality, and reliability. High precision PCB control circuit board: Microcomputer control, imported components, multi-layer chip technology, dust prevention, moisture-proof, and anti leakage treatment. By presetting expert welding mode parameters, novices can also become masters of gold. The computer automatically memorizes the last operation for the convenience of next boo Intelligent induction repair technology: Intelligent induction/manual integrated one button switch Quick heating repair technology: The combination of quick drawing tools and hot spray guns can achieve one-time drawing repair of concave parts of aluminum body Double grounding design: Fully the current direction of aluminum mesons during the welding process, prevents arc welding, and makes the welding more secure High energy capacitor: Capable of withstanding greater charging and discharging currents than 1 million times, with faster speed Automatic adjustment of welding gun: Different studs require different welding forces, so the welding gun pressure can be automatically adjusted according to different studs Core patented technology: Plug and play pull ring: Plug and play pull ring: regardless of M4, M5, M6 screws, plug and play, greatly improving work efficiency. Avoiding damage and disposal of the pull ring caused by stuck or broken nails. Fast charging and discharging technology: The super large energy storage capacitor has a large capacity, fast charging and discharging speed, and long service life, ensuring the welding firmness of the machine. The power storage process only requires 0.3S, which is called fast charging technology. Rapid heating repair technology: (patented technology) Aluminum body has poor tensile resistance and cannot achieve spot welding and direct pulling like iron body. The combination of a quick puller and a hot spray gun can achieve rapid drawing and repair of dents in aluminum body parts. Package Includes 1pcs x Spot welding machine for aluminum 1pcs x Dent pull lever bar 1pcs x Pull hook/comb (6 hooks) 1pcs x Ruller 500 mm 1pcs x Hammer 1pcs x Scriber 2pcs x Sanding pads 3pcs x Stud coller 3pcs x Studs M3 / M4 / M5 (1 bag each) 9pcs x OT Pull Gaskets Aluminum Notice: Due to the fact that the aluminum body is made of 1.2mm aluminum material, inaccurate welding power operation can cause poor welding or penetration. When selecting a model, please try to choose a new generation of digital high-precision control models. Aluminum body has high strength and poor local tensile performance, making it prone to cracking. In order to improve its strength during the body manufacturing process, the elongation rate has exceeded 30%. Therefore, special tools must be used when repairing. During the repair process of aluminum body, one of the time-consuming tasks after welding the threaded nails is to screw in and out the threaded nails with the pull ring, which is time-consuming and labor-intensive. And the broken threaded nails in the later stage also delay the reuse of the pull ring. The aluminum body is made of aluminum magnesium alloy, with a melting point of 630-650C. The stress relieving annealing temperature of aluminum magnesium alloy is between 320 and 360 ° C, which can be used for deformation repair. During the repair process, tools that do not exceed this temperature must be used to assist heating. There are also areas with reinforced adhesive connections on the back, and the heating temperature should not be too high. The firmness of meson welding will directly affect the repair effect. The double grounding point design fully ensures the current direction, avoids arc deviation, makes welding more secure, and thus ensures repair quality. Package dimensions 505 x 320 x 350 - 17 kg
Spring axial lock washer kit
Made of steel 65 Mn M3 - 30 pcs. M4 - 30 pcs. M5 - 40 pcs. M6 - 50 pcs. M8 - 50 pcs. M10 - 40 pcs. M12 - 20 pcs.
Spring for protection hood of PL-1150
100-112 (P-100-330000-0) Overall length 87 mm Diameter 25 mm
Spring hose clamp pliers with locking KNIPEX
Article No:. 85 51 250 C EAN: 4003773078517 Opening and closing Click Clamps does not require a special skill No need to replace the OEM clamp with a screw clamp, these pliers will not harm the clamps they are compressing, allowing them to be reused over and over again Rotating tips for reliably gripping of clamps in any position High leverage allows clamps to be opened and closed again comfortably and easily without a great deal of effort 14 adjustment positions For easy working on fuel hoses, vacuum pipes with suction nozzles and many other applications Slim head design, narrow head width, and rotatable grip inserts make this an ideal tool especially in confined areas Detach hoses gently using the serrated jaw behind the tips Chrome vanadium electric steel; forged, oil-hardened Max gripper up to 70 mm L= 250 mm Non-slip plastic coating on handle Dimensions 250 x 50 x 20 mm Weight 345 g
Spring retainer for air hammer. Spare part
Spring retainer – spare part for an air hammer. It holds the working bit (chisel or punch) in the hammer barrel and prevents it from falling out during use, so a worn retainer should be replaced for safety.Brand: HYMAIRApplication: air hammerType: spare part
Spring set (200pcs.)
12 pcs. 4 x 79.5 mm 8 pcs . 4.5 x 44.5 mm 10 pcs . 5 x 20.5 mm 10 pcs . 5.5 x 17.5 mm 10 pcs . 5.5 x 25.5 mm 10 pcs . 5.5 x 38 mm 10 pcs . 6.5 x 10 mm 10 pcs . 6.5 x 22 mm 10 pcs . 7 x 12.5 mm 10 pcs. 7 x 19 mm 10 pcs. 7 x 38 mm 12 pcs. 7 x 51 mm 8 pcs. 8 x 28.5 mm 10 pcs. 8 x 31.5mm 12 pcs. 8 x 44.5mm 10 pcs. 8.5 x 36.5 mm 12 pcs. 8.5 x 47 mm 8 pcs. 9 x 35 mm 6 pcs. 9.5 x 16 mm 12 pcs. 9.5 x 19 mm
Square with zinc handle - 250mm (10")
Zinc handle Metric/Imperial scale Manufactured from stainless steel for better strength and longer tool life
Stainless steel measuring line - 300mm (12")
Manufactured from stainless steel for improved strength and durability Easy-to-read graduations marked on both sides on both edges Deeply-etched permanent markings are black- and red-filled for easy reading and wear resistance
Stainless steel nuts set M3-M10 300pcs
DIN 934 Set of 300 metric stainless steel nuts includes sizes M3 – 80 pcs, M4 - 70 pcs, M5 - 70 pcs, M6 - 50 pcs, M8 - 20 pcs, M10 - 10 pcs
Stainless steel scissors 180mm
Heavy-duty blades feature premium grade stainless steel and are precision engineered for knife-like cutting edges Durable zinc alloy handle is designed with an enlarged lower ring to fit comfortably in the users' hands Long blade design maximizes cutting effort Handle grips for easy cleaning and better control Used for cutting light-gauge metals, screening, floor tiles, vinyl, plastic, leather, paper, rubber, and more
Stainless steel scissors 195mm
The scissor body is made of high-quality stainless steel, and the scissor handle is made of ABS engineering plastics The knife edge gap can be adjusted by the lock nut and the screw shaft Easy to use, strong cutting force, sharp, but not suitable for cutting hard items
Stainless steel scraper set 4pcs
Set of rectangular spatulas. Made of stainless, resilient sheet metal finished with a plastic handle. The set includes spatulas of the following widths: 50 mm 80 mm 100 mm 120 mm Used for precise application of compounds and leveling of surfaces prior to varnishing.
Standard bumping hammer 0.8kg
The hammer head is made of high-carbon steel and is integrally forged and quenched to prevent breakage. Miniature flat surface, the force on the striking surface is more even during use TPR plastic protective handle, comfortable and non-slip Used for shaping operations of industrial car bodies, automobiles, and mechanical sheet metal
Standard bumping hammer. 0.31kg
Standard bumping hammer weighing 0.31 kg. Designed for straightening metal panels and smoothing out dents in body repair work, often used together with a dolly. Suitable for both professional body shops and home use.Brand: SATAWeight: 0.31 kgApplication: body repair
Standard weight 100g for Wheel balancers. Spare part
Standard (calibration) weight for wheel balancers. Used to calibrate the balancer and check its accuracy so that measurement results are reliable. Best kept next to the machine so it is always at hand.Brand: PULIMass: 100 gType: spare part
Staple gun 6-14mm 3 way
Upholstery stapler designed for fast joining of different materials such as wood with fabrics, cardboard, paper, or leather. Used in upholstery, roofing, decorating, building finishes, etc. Connects materials by means of a steel staple or nail driven in with great force. The stapler is designed to drive typical steel rectangular staples " U " in the length range of 6-14mm and nails " T " of 8 to 14mm. It also drives " I "steel staples with a length of 14mm The stapler has an adjustable ram spring pressure - adjustable impact force. Staple dimensions: 6-14 x 1.2 x 10.6 mm Nail dimensions: 10-14 x 1.2 x 2 mm Stick size: 14 x 1.2 mm
Staple gun 6-14mm with staple set
Hand staple gun for fixing fabric, foil, cardboard, upholstery and other materials to wooden surfaces. A set of staples is included, so the tool is ready to use for repairs, furniture upholstery and household jobs.Brand: YATOStaple length: 6–14 mmIncluded: staple set
Staple gun 6-15mm 2 way
The stapler, commonly known as a taker, is designed for driving, typical steel, rectangular staples in the length range from 6-14mm, nails with a length of 15mm. Stapler with adjustable striker spring pressure - adjustable impact force. Also features staple unstitcher function Catcher for carrying on belt. Types to be used: rectangular staples, nails Staple dimensions: 6-14 x 1.2 x 11.3 mm Nail dimensions: 10-15 x 1.2 x 2 mm