Product catalog
Siphon transfer pump kit for gasoline 200CC
Capacity 200 ml Oil resistant tube (outside ⌀ 13 mm, L= 1500 mm)
Slider for PL-4.0-2B / 2D. Spare part
Slider for PULI PL-4.0-2B and PL-4.0-2D vehicle lifts. This spare part replaces a worn or damaged slider to keep the lift working properly. Please check that your lift model matches before ordering.Brand: PULICompatibility: PL-4.0-2B / PL-4.0-2DType: spare part
Sliding hammer - mini type with 10pcs glue pads
Sliding hammer 0.43 kg 10 pcs. glue pads
Sliding hammer/puller CV joint removal set 4pcs
Use this easy-to-use CV joint puller, without spending a lot of effort, and without causing any damage to expensive aluminum transmission cases or other components With 63mm 48mm Joint Fork: Our kit includes opening 63mm and 48mm cv joint fork removing adapter, the CV Joint Fork is threaded internally, and the Slide Hammer stick is threaded externally. the joint fork could fit on the slide hammer stick, 63mm and 48mm fit most vehicle models, have a wide use This kit has everthing you need to remove CV axle or half shaft.
Sliding hammer/puller set 9pcs
2.5 kg Slide hammer with 570 mm shaft Twin leg puller: Internal capacity Ø 35 - 110 mm, reach 82 mm External capacity Ø 50 - 140 mm, reach 75 mm Triple leg puller: Internal capacity Ø 50 - 135 mm, reach 82 mm External capacity Ø 20 - 135 mm, reach 75 mm
Sliding hammer/puller set 9pcs.
2.5 kg Slide hammer with 570 mm shaft Twin leg puller: Internal capacity Ø 35 - 110 mm, reach 82 mm External capacity Ø 50 - 140 mm, reach 75 mm Triple leg puller: Internal capacity Ø 50 - 135 mm, reach 82 mm External capacity Ø 20 - 135 mm, reach 75 mm
Slogging wrench E-torx and SPLINE set (5pcs) for brake caliper screw
Use of the wrench for assembly and disassembly of the brake caliper screw connections renders disassembly of the steering tie lever unnecessary Correct tightening of screws with torque wrench in accordance with the manufacturer’s specifications Wrench flat with lasered formula for calculating the correct effective length. For the operation of TORX screws on brake caliper screw connections on commercial vehicles front axle and trailing axles E18 X 3/4" DR. MAN TGL TGM E20 X 3/4" DR. MAN TGL TGM E24 X 3/4" DR. MAN TGA TGS TGX M24 X 3/4" DR. SAF- brake calliper M26 X 3/4" DR. DAF XF95/XF105/XF
Slotted special socket set 7pcs (10-19mm)
Used with specialized socket wrenches to unscrew fuel lines, temperature sensors, thermal switches, lambda probes and other elements with cables Range: 10, 11, 12, 13, 14, 17, 19 mm Drive: 3/8 "(10 mm) and 1/2" (12.5 mm) Sockets made of durable chrome vanadium steel Placed on a metal bar Type of cap: open
Snap ring pliers internal close straight 175mm
L = 175 mm For circlip Ø 19 - 60 mm Anti-rust black finishing Material Alloy steel
Snap ring pliers set 4pcs
L = 175 mm 1 pcs. For internal snap rings, straight. Ø 10 - 50 mm 1 pcs. For internal snap rings, bent nose. Ø 10 - 50 mm 1 pcs. For external snap rings, straight. Ø 6 - 50 mm 1 pcs. For internal snap rings, bent nose. Ø 10 - 50 mm CrV steel DIN 5254
Snap ring pliers set 5pcs.
1 pcs. Plier body 1 pcs. 1.5 tip, straight 1 pcs. 2.0 tip, straight 1 pcs. 45° tip 1 pcs. 90° tip For internal and external circlips
Snap-in tap adaptor 3/4" (external thread)
Tap adaptor with a 3/4" external thread for garden watering systems. It converts a threaded connection to a snap-in quick connection, so a hose can be attached and detached quickly without tools.Connection: 3/4" external threadCoupling type: snap-in quick connection
Snipe nose combination bent pliers 200mm KNIPEX
Article No.: 26 22 200 EAN: 4003773023135 Elastic tips; stable even when twisted Distortion-tolerant, flexible precision tips Snipe nose side cutting pliers also known as stork beak pliers Half-round, long, pointed jaws Hardened cutting edges (approx. 61 HRC) for soft, medium hard and hard wire Slim long nose is ideal for working in confined areas Vanadium steel; forged, multi stage oil-hardened Length 200 mm Width 53 mm Height 19 mm Weight 197 grams Cutting capacities Medium hard wire Ø 3.2 mm Hard wire Ø 2.2 mm
Socket adapter - 1/4""
Comply with DIN 3123 standard manufacturing requirements Made of high-quality chromium vanadium steel, heat treatment through the body, high strength and good toughness Insert the corresponding dual-purpose ratchet, which can be transformed into a ratchet wrench through this joint 1/4" with 10mm two-way dual-purpose ratchet 3/8" with 13mm two-way dual-purpose ratchet 1/2" with 19mm two-way dual-purpose ratchet
Socket head screw set HEX 160pcs
15 pcs. 3 x 5 mm 15 pcs. 4 x 5 mm 10 pcs. 5 x 6 mm 20 pcs. 6 x 6 mm 15 pcs. 6 x 6 mm F 10 pcs. 6 x 10mm 20 pcs. 8 x 10 mm 15 pcs. 8 x 10 mm F 10 pcs. 8 x 12 mm 10 pcs. 10 x 10 mm 10 pcs. 10 x 10 mm F 10 pcs. 10 x 12 mm
Soda blaster 7 gallon (26L)
Capacity 26 l Soda capacity 18 kg Working pressure 2 - 6 bar Air consumption at 6 bar 240 l/min Hose L = 2.5 m Overall dimensions H x L x W 790 x 400 x 350 mm Weight 13.0 kg Package size 680 x 265 x 345 mm
Soda blaster XHSDB07 nozzle set 2 pcs
Nozzle set for the XHSDB07 soda blaster. Nozzles wear under the action of the blasting media, so they are replaced periodically to keep an even jet and effective surface cleaning.Compatibility: XHSDB07Quantity in set: 2 pcs
Sodablasting gun with cup 1.0L
Cup capacity 1.0 l Operating pressure 2 - 6 bar Max pressure 8 bar Average air consumption 240 l/min at 6 bar Sodablasting neither damages glass, rubber or chrome, nor heats or stretches even the thinnest sheet metal. Using the sodablasting gun, you can remove paint, impurities, mould and grease from a variety of objects. Soda is an environmentally friendly choice that is soluble in water Video of analog product:
Soft grip utility knifer 18mm
Utility knife’s body is built around a steel blade sleeve for maximum durability Ergonomic, dual material case with a thumb bridge is comfortable and convenient to use Unique blade snapper slides out of the body for easy access, renewing the blade’s edge easily Blades made from professional SK2 alloy steel stay sharp through heavy use for a longer tool life Snap blade utility knife is ideal for a range of professional and residential tasks
Soft solder wire for copper 2.0mm (Sn97Cu3)
S-Sn97Cu3 (L-Sn97Cu3) DIN EN29453 Tin with 3% copper addition, used for soft soldering of copper or brass pipes and fittings in hot and cold water installations, as well as in central heating systems Melting point from 220 ° C to 310 ° C We recommend using pastes and fluxes for soft soldering Used for soft soldering of copper or brass pipes and fittings in hot and cold water installations, as well as in central heating systems
Soft vice jaws aluminium 2pcs - 100x30x10mm
Interchangeable jaws for vices Aluminum material, jaw working surface lined with a layer of cut rubber Fastened to the vice with two magnets inserted The use of additional soft jaws protects the processed material from damage during strong clamping in the vice
Solar flood light 100W
Body material: ABS plastic Product size: 210 x 208 x 63 mm Solar panel size: 350 x 350 x 17 mm Lithium battery: 10AH Product power: 100W 6000К Lamp model: LED 288 pcs Solar battery input voltage: 6V/12W Solar panel: monocrystalline silicon wafer Water resistance level: IP66 Motion sensor Remote control
Solar flood light with daylight sensor 50W
Body material: Aluminum + tempered glass Product size: 185 x 163 x 50 mm Solar panel size: 350 x 235 x 17 mm Lithium battery: 5AH Product power: 50W 6000К Lamp model: LED 128 pcs Solar battery input voltage: 6V/6W Solar panel: monocrystalline silicon wafer Water resistance level: IP65 Intelligent light control / daylight sensor Remote control
Solar Street Light 100W
Body material: ABS plastic (convex mirror) Product size: 555 x 250 x 55 mm Product color: black Lithium battery: 10AH Product power: 100W 2835K Lamp model: COB 50W x 2 Solar battery input voltage: 6V/9W Solar panel: monocrystalline silicon wafer Water resistance level: IP65 Captures motion (also suitable for outdoor use) Remote control Bracket mounting Ø 41 mm